MPR Kontakt Icon
Choose language
MPR Suche
MPR Close
Schließen
Zurück

BIS Certification for Geo Textiles

12. August 2026

Geo textiles and related geosynthetic products are subject to strict regulatory requirements in India. For products falling under standards such as IS 15351:2015, IS 15909:2020, IS 16653:2017, IS 16654:2017, IS 14715 (Part 1):2016, IS 14715 (Part 2):2016, IS 15869:2020, IS 16391:2015, IS 16393:2015, IS 16362:2020, IS 16352:2020, IS 16090:2013, IS 16392:2015, IS 17371:2020, IS 17372:2020, IS 17373:2020, IS 17374:2020, IS 17483 (Part 1):2020, IS 17483 (Part 2):2020, and IS 17880:2022, BIS certification is essential to demonstrate conformity with Indian technical requirements for material quality, performance, durability, installation suitability, and manufacturing consistency under the BIS ISI Scheme.

Indian Standard (IS)Product Category / ApplicationCertification TypeFactory Audit Required?
IS 15351:2015Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining (Waterproofing)BIS ISI Scheme IYes
IS 15909:2020Poly Vinyl Chloride (PVC) Geomembranes (Containment & Environmental protection)BIS ISI Scheme IYes
IS 16653:2017Needle Punched Non-Woven Geobags (Hydraulic & Erosion control)BIS ISI Scheme IYes
IS 16654:2017Polypropylene Multifilament Woven Geobags (Geotechnical applications)BIS ISI Scheme IYes
IS 14715 (Part 1):2016Jute Geotextiles (Part 1) (Civil engineering & Infrastructure)BIS ISI Scheme IYes
IS 14715 (Part 2):2016Jute Geotextiles (Part 2) (Specific technical criteria)BIS ISI Scheme IYes
IS 15869:2020Open Weave Coir Bhoovastra (Soil conservation & Slope protection)BIS ISI Scheme IYes
IS 16391:2015Geotextiles Used in Sub-Grade Separation in Pavement Structures (Road construction)BIS ISI Scheme IYes
IS 16393:2015Geotextiles Used in Subsurface Drainage Application (Drainage systems)BIS ISI Scheme IYes
IS 16362:2020Geotextiles Used in Sub-Grade Stabilisation in Pavement Structures (Pavement stabilization)BIS ISI Scheme IYes
IS 16352:2020High Density Polyethylene (HDPE) Geomembranes for Lining (Linings & Containment)BIS ISI Scheme IYes
IS 16090:2013Geotextiles Used as Protection (or Cushioning) Materials (Cushioning layers)BIS ISI Scheme IYes
IS 16392:2015Geotextiles for Permanent Erosion Control in Hard Armor Systems (Erosion control)BIS ISI Scheme IYes
IS 17371:2020Geogrids for Flexible Pavements (Pavement reinforcement)BIS ISI Scheme IYes
IS 17372:2020Polymeric Strip or Geostrip Used as Soil Reinforcement in Retaining Structures (Soil reinforcement)BIS ISI Scheme IYes
IS 17373:2020Geogrids Used in Reinforced Soil Retaining Structures (Retaining walls)BIS ISI Scheme IYes
IS 17374:2020Reinforced HDPE Membrane for Effluents and Chemical Resistance Lining (Chemical containment)BIS ISI Scheme IYes
IS 17483 (Part 1):2020Geocells (Part 1) (Load support & Confinement)BIS ISI Scheme IYes
IS 17483 (Part 2):2020Geocells (Part 2) (Complementary technical requirements)BIS ISI Scheme IYes
IS 17880:2022Synthetic Polymer Rope Gabions for Coastal and Waterways Protection (Coastal protection)BIS ISI Scheme IYes

BIS Certification for Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining according to IS 15351:2015 (Waterproofing)

IS 15351:2015 defines the technical requirements for laminated HDPE woven geomembranes in waterproofing applications. The standard ensures that geomembrane linings exhibit specified barrier properties and tensile strength to guarantee reliable fluid containment in civil and environmental engineering.

Covered Products:

  • Laminated HDPE woven geomembranes for waterproofing measures
  • Specialized geosynthetic barriers for water resource protection

BIS Certification for Poly Vinyl Chloride (PVC) Geomembranes according to IS 15909:2020 (Environmental & Landfill Engineering)

IS 15909:2020 governs material and performance parameters for polyvinyl chloride (PVC) geomembranes in containment and lining applications. The standard evaluates resistance, elongation, and chemical stability under environmental exposure.

Covered Products:

  • PVC geomembranes for retention ponds and environmental protection facilities

BIS Certification for Needle Punched Non-Woven Geobags according to IS 16653:2017 (Hydraulic Applications)

IS 16653:2017 establishes criteria for needle punched non-woven geobags used in hydraulic engineering, coastal defense, and bank protection. Evaluations focus on filtration stability, water permeability, and mechanical robustness.

Covered Products:

  • Needle punched non-woven geobags for erosion control and hydraulic structures

BIS Certification for Polypropylene Multifilament Woven Geobags according to IS 16654:2017 (Geotechnical Engineering)

IS 16654:2017 applies to polypropylene multifilament woven geobags utilized in geotechnical construction. The standard ensures that bags withstand high tensile loads and degradation resistance in earth and foundation engineering.

Covered Products:

  • Polypropylene multifilament woven geobags for geotechnical applications

BIS Certification for Jute Geotextiles according to IS 14715 (Part 1 & 2):2016 (Natural Fibre Geotextiles)

IS 14715 (Part 1 and 2):2016 specify standards for jute geotextiles in civil engineering and infrastructure. The standards evaluate mass per unit area, tensile strength, and biodegradability for temporary erosion control and soil stabilization measures.

Covered Products:

  • Jute geotextiles for infrastructure and earthwork engineering

BIS Certification for Open Weave Coir Bhoovastra according to IS 15869:2020 (Soil Conservation)

IS 15869:2020 regulates properties of open weave coir bhoovastra (natural fibre fabrics) for slope and erosion protection. Evaluations cover mesh size, fibre strength, and effectiveness in vegetation support and soil consolidation.

Covered Products:

  • Open weave coir bhoovastra for soil protection applications

BIS Certification for Geotextiles Used in Sub-Grade Separation in Pavement Structures according to IS 16391:2015 (Road Construction)

IS 16391:2015 sets requirements for geotextiles acting as separation layers in pavement sub-grades to prevent the intermixing of adjacent dissimilar soil or aggregate layers.

Covered Products:

  • Separation geotextiles for road and highway construction

BIS Certification for Geotextiles Used in Subsurface Drainage Application according to IS 16393:2015 (Subsurface Drainage)

IS 16393:2015 applies to geotextiles used in subsurface drainage systems. The standard ensures long-term water flow capacity while reliably retaining surrounding soil particles.

Covered Products:

  • Drainage geotextiles for buried drainage systems

BIS Certification for Geotextiles Used in Sub-Grade Stabilisation in Pavement Structures according to IS 16362:2020 (Pavement Stabilization)

IS 16362:2020 defines performance parameters for geotextiles stabilizing pavement sub-grades to enhance the load-bearing capacity of roadway structures.

Covered Products:

  • Stabilization geotextiles for transportation infrastructure

BIS Certification for High Density Polyethylene (HDPE) Geomembranes for Lining according to IS 16352:2020 (HDPE Geomembranes)

IS 16352:2020 covers HDPE geomembranes for general lining and containment applications. The standard ensures stress crack resistance and long-term durability.

Covered Products:

  • HDPE geomembranes for ponds, canals, and landfills

BIS Certification for Geotextiles Used as Protection (or Cushioning) Materials according to IS 16090:2013 (Cushioning Materials)

IS 16090:2013 regulates geotextiles used as protective or cushioning layers to safeguard sensitive membranes against damage from sharp stones or structural elements.

Covered Products:

  • Protection and cushioning geotextiles in geosynthetic composite designs

BIS Certification for Geotextiles for Permanent Erosion Control in Hard Armor Systems according to IS 16392:2015 (Hard Armor Systems)

IS 16392:2015 applies to geotextiles used in conjunction with hard armor systems (riprap, concrete slabs) on banks and slopes.

Covered Products:

  • Erosion control geotextiles for hard armor systems

BIS Certification for Geogrids for Flexible Pavements according to IS 17371:2020 (Pavement Geogrids)

IS 17371:2020 establishes test criteria for geogrids reinforcing asphalt and roadway layers to minimize rutting and fatigue cracking.

Covered Products:

  • Geogrids for flexible pavement applications

BIS Certification for Polymeric Strip or Geostrip Used as Soil Reinforcement in Retaining Structures according to IS 17372:2020 (Geostrips)

IS 17372:2020 regulates polymeric strips and geostrips used to stabilize retaining structures and reinforced soil walls.

Covered Products:

  • Polymeric strips and geostrips for soil reinforcement in retaining structures

BIS Certification for Geogrids Used in Reinforced Soil Retaining Structures according to IS 17373:2020 (Retaining Walls)

IS 17373:2020 defines technical requirements for geogrids utilized in reinforced soil retaining structures and earth walls.

Covered Products:

  • Reinforcement geogrids for retaining structures

BIS Certification for Reinforced HDPE Membrane for Effluents and Chemical Resistance Lining according to IS 17374:2020 (Chemical Resistance)

IS 17374:2020 covers reinforced HDPE membranes with high chemical resistance for industrial effluent containment and leachate management.

Covered Products:

  • Chemically resistant reinforced HDPE membranes for industrial facilities

BIS Certification for Geocells according to IS 17483 (Part 1 & 2):2020 (Geocells)

IS 17483 (Part 1 and 2):2020 regulate cellular confinement systems (geocells) for soil stabilization, slope protection, and load support in civil engineering.

Covered Products:

  • Geocells for stabilization and earth retention measures

BIS Certification for Synthetic Polymer Rope Gabions for Coastal and Waterways Protection according to IS 17880:2022 (Coastal Protection)

IS 17880:2022 specifies standards for synthetic polymer rope gabion systems deployed in coastal and waterways protection environments.

Covered Products:

  • Synthetic polymer rope gabions for coastal and waterways protection

How does the BIS certification process work?

The certification process for BIS ISI Scheme I follows a structured 7-step procedure:

  1. Preparation: Compiling technical specifications, quality manuals, and manufacturing data.
  2. AIR Appointment: Appointing an Authorized Indian Representative (AIR) to manage local coordination with the Bureau of Indian Standards (BIS).
  3. Application: Submitting official application forms and technical documentation to the BIS authorities.
  4. Factory Audit: Undergoing a mandatory on-site inspection by a BIS-appointed auditor to verify manufacturing facilities and quality control systems.
  5. Product Testing: Drawing official product samples and testing them at a BIS-recognized laboratory in India against the respective IS standards.
  6. Grant of Licence: Evaluating test reports and audit findings to issue the official BIS licence.
  7. Marking: Applying the official ISI mark to certified products prior to market entry in India.

FAQ on BIS certification for geo textiles in India

  • Is BIS certification mandatory for geo textiles in India?
    Yes, BIS certification is mandatory for geo textiles and geosynthetics when they fall under notified Quality Control Orders (QCOs) or relevant Indian technical regulations. Manufacturers must hold a valid BIS licence before importing or selling these items in India.
  • Which standards govern geomembranes and lining materials in India?
    IS 15351:2015, IS 15909:2020, and IS 16352:2020 are the primary standards for HDPE and PVC geomembranes and lining products. They ensure containment integrity in environmental and water engineering.
  • What standards apply to geogrids and reinforcement products in civil engineering?
    IS 17371:2020 for flexible pavements and IS 17373:2020 for reinforced soil retaining structures are the governing standards. They secure structural performance in infrastructure projects.
  • How long does BIS certification take for geosynthetics?
    The BIS certification timeline typically ranges from 4 to 6 months. Duration depends on testing complexity, factory audit scheduling, and documentation completeness.
  • Is a factory audit mandatory to obtain an ISI licence for geo textiles?
    Yes, a physical factory audit by a BIS inspector is a compulsory requirement under BIS ISI Scheme I. This inspection verifies production sites and internal quality assurance processes on-site.

MPR International GmbH – BIS certification service for geo textiles

MPR International GmbH supports manufacturers and exporters comprehensively with BIS certification for geo textiles and geosynthetics in India. The scope of support includes regulatory analysis, assessment of the applicability of relevant Indian Standards (IS), coordination of product testing in accredited laboratories, review of technical documentation, factory audit preparation, and end-to-end guidance throughout the ISI certification process.

For companies wishing to place geomembranes, geotextiles, geogrids, geocells, or gabions on the Indian market, MPR International provides tailored assistance with scope clarification, test planning, audit preparation, and regulatory approval management.

MPR Author

[cfgeo exclude="IQ,IR,RU,BY,SY,IN"]
Chat profile
MPR Chat

Get an AI assessment of your product’s certification requirements. Contact with an MPR team member available.

Erhalten Sie eine KI-Einschätzung zu den Zertifizierungsanforderungen Ihres Produkts. Kontakt zu einem MPR-Mitarbeiter möglich.

[/cfgeo]