your one-stop certification solution!
Relevante BIS-Producten
Hieronder vindt u een overzicht van producten die BIS-certificering vereisen (Scheme I, ISI Mark Scheme; een audit is vereist), gevolgd door een aparte lijst voor producten die BIS-registratie vereisen (Scheme II, Compulsory Registration Scheme (CRS); zonder audit).
Je vindt er ook de bijbehorende IS-normen volgens welke er getest moet worden.
Het is zeer waarschijnlijk dat deze lijsten van voor de BIB relevante componenten zullen worden uitgebreid.
Lees voor meer informatie over BIS-certificering ons gratis informatiepakket „BIS Certification – The Booklet“.
1. Producten die BIS-Certificering Vereisen (Schema I, ISI Mark Scheme)
Sr No. | IS No. | Product |
Cement (any variety of cement manufactured or sold in India) such as | ||
1. | IS 12330 | Sulphate Resisting Portland Cement |
2. | IS 12600 | Low heat Portland Cement |
3. | IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based |
4. | IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based |
5. | IS 269 | Ordinary Portland Cement |
6. | IS 3466 | Masonry Cement |
7. | IS 455 | Portland Slag Cement |
8. | IS 6452 | High Alumina Cement for Structural use |
9. | IS 6909 | Super sulphated cement |
10. | IS 8041 | Rapid hardening Portland cement |
11. | IS 8042 | White Portland Cement |
12. | IS 8043 | Hydrophobic Portland Cement |
13. | IS 8229 | Oil well Cement |
14. | IS 16415: 2015 | Composite Cement- Specification. |
15. | IS 16993: 2018 | Microfine Ordinary Portland Cement- Specification. |
16. | IS 15895: 2018 | High Alumina Refractory Cement. |
Household Electrical goods | ||
17. | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) |
18. | IS 12640 (Part 2) | Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs) |
19. | IS 13010 | AC watt-hour meters, class 0.5, 1 & 2 |
20. | IS 13779 | AC static watt-hour meters, class 1 & 2 |
21. | IS 14697 | AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S |
22. | IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements |
23. | IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances – Electric iron |
24. | IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances– Electric immersion water-heaters |
25. | IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves |
26. | IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters |
27. | IS 3854 | Switches for domestic and similar purposes |
28. | IS 418 | Tungsten filament general service electric lamps (upto100 W ) |
29. | IS 694 | PVC insulated cables for working voltages up to and including 1100V |
30. | IS 8828 * | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations |
31. | IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V |
* Since revised as IS/IEC 60898 | ||
Batteries | ||
32 | IS 8144 | Multi-Purpose dry batteries |
Food & Related Products | ||
33. | IS 15757 | Follow–up formula –complimentary foods |
34. | IS 11536 | Processed cereal based complementary foods |
35. | IS 1165 | Milk-powder |
36. | IS 1166 | Condensed milk, partly skimmed and skimmed condensed milk |
37. | IS 12176 | Sweetened ultra high temperature treated condensed milk |
38. | IS 13334 (Part 1) | Skimmed milk-powder, standard grade |
39. | IS 13334 (Part 2) | Skimmed milk-powder, extra grade |
40. | IS 13428 | Packaged Natural Mineral Water |
41. | IS 14433 | Infant milk substitutes |
42. | IS 17945: 2022 | Food for Special Medical Purpose intended for Infants |
43. | IS 14542 | Partly skimmed milk powder |
44. | IS 14543 | Packaged Drinking Water (Other than Packaged Natural Mineral Water) |
45. | IS 1656 | Milk- cereal Based Complementary foods |
46. | IS 14625 | Plastic Feeding Bottles |
47. | IS 5168 | Glass Feeding Bottles |
Oil Pressure Stoves | ||
48. | IS 10109 | Oil pressure stove, offset burner type |
49. | IS 2787 | Multi-burner oil pressure stoves |
50. | IS 1342 | Oil pressure stoves |
Automobile Accessories | ||
51. | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres |
52. | IS 15627 | Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles |
53. | IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply |
54. | IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply |
Cylinder, Valves and Regulator | ||
55. | IS 14899 | Liquefied petroleum gas containers for automotive use |
56. | IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use |
57. | IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases |
58. | IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) |
59. | IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. |
60. | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
61. | IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders |
62. | IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity |
63. | IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders |
64. | IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) |
65. | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus |
66. | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders |
67. | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders |
68. | IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity |
69. | IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures |
Medical Equipment | ||
70. | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type |
71. | IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type |
72. | IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment |
Steel and Iron Products | ||
73. | IS 1785 (Part 1) : 1983 | Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire |
74. | IS 1785 (Part 2) : 1983 | Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire |
75. | IS 6003:2010 | Indented wire for Pre-stressed concrete |
76. | IS 6006:2014 | Uncoated stress relieved strand for Pre-stressed concrete. |
77. | IS 13620:1993 | Fusion bonded epoxy coated reinforcing bars |
78. | IS 14268:1995 | Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete. |
79. | IS 277:2003 | Galvanized steel sheets ( plain and corrugated). |
80. | IS 2002:2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers. |
81. | IS 2041:2009 | Steel plates for pressure vessels used at moderate and low temperature |
82. | IS 2830:2012 | Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose |
83. | IS 1786:2008 | High strength deformed steel bars and wires for concrete reinforcement |
84. | IS 648:2006 | Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) |
85. | IS 3024:2015 | Grain oriented electrical steel sheet & strip (CRGO) |
86. | IS 15391:2003 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification. |
87. | IS 2062:2011 | Hot rolled medium and high tensile structural steel |
88. | IS 432 : Part 1:1982 | Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars |
89. | IS 432 : Part 2:1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire |
90. | IS 513 (Part-1): 2016 | Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose |
91. | IS 513(Part-2):2016 | Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel |
92. | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification. |
93. | IS 1875:1992 | Carbon steel billets, blooms, slabs and bars for forgings. |
94. | IS 2879:1998 | Mild steel for metal arc welding electrodes. |
95. | IS 3502:2009 | Steel Chequered Plates |
96. | IS 5872:1990 | Cold Rolled Steel Strips (Box Strappings). |
97. | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification. |
98. | IS 6240:2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
99. | IS 7283:1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications. |
100. | IS 7887:1992 | Mild steel wire rods for general engineering purposes. |
101. | IS 10748:2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes. |
102. | IS 11513:2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification |
103. | IS 15647:2006 | Hot rolled steel narrow width strip for welded tubes and pipes |
104. | IS 7904:2017 | High carbon steel wire rods- Specification |
105. | IS 14246:2013 | Continuously pre-painted galvanized steel sheets and coils |
106. | IS 15965:2012 | Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain). |
107. | IS 280: 2006 | Mild steel wire for General Engineering purposes. |
108. | IS 1835:1976 | Round Steel wire for ropes |
109. | IS 3975:1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables |
110. | IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. |
111. | IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. |
112. | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. |
113. | IS 4824:2006 | Bead Wires for Tyres |
114. | IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels |
115. | IS 11587:1986 | Structural Weather resistant steel. |
116. | IS 15103: 2002 | Fire resistant Steel- Specification |
117. | IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. |
118. | IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) |
119. | IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance |
120. | IS 6527:1995 | Stainless Steel wire Rod |
121. | IS 6528:1995 | Stainless Steel Wires |
122. | IS 6603:2001 | Stainless Steel Bars and Flats |
123. | IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification |
124. | IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification |
125. | IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification |
126. | IS 1110 : 1990 | Ferrosilicon – Specification |
127. | IS 4409 : 1973 | Specification for Ferronickel |
128. | IS 1029 : 1970 | Specification for Hot rolled steel strip (bailing) |
129. | IS 2385 : 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate |
130. | IS 3039 : 1988 | Specification for Structural steel for construction of hulls of ships |
131. | IS 9550 2001 | Bright steel bars – v Specification |
132. | IS 3748 : 1990 | Tool and die steels – Specification |
133. | IS 5517 : 1993 | Steel for hardening and tempering – Specification |
134. | IS 7291 : 1981 | Specification for High speed tool steels |
135. | IS 7494 : 1981 | Specification for Steel for valves for internal combustion engines |
136. | IS 12146 : 1987 | Specification for Carbon manganese steel forgings for pressure vessels |
137. | IS 16585 : 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. |
138. | IS 2831 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification |
139. | IS 1148: 2009 | Steel Rivet Bars (medium And High Tensile) – For Structural Purposes |
140. | IS 1673: 1984 | Specification for Mild Steel Wire, Cold Heading Quality |
141. | IS 1812: 1982 | Specification for Carbon Steel Wire for the Manufacture of Wood Screws |
142. | IS 2507: 1975 | Specification for Cold – rolled Steel Strips For Springs. |
143. | IS 2255: 1977 | Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). |
144. | IS 3195: 1992 | Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification . |
145. | IS 3431: 1982 | Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. |
146. | IS 3885-Part-1: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification. |
147. | IS 3885-Part- 2: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. |
148. | IS 4223: 1975 | Specification for Steel Wire for Umbrella Ribs . |
149. | IS 4224: 1972 | Specification for Steel Wire for Staples, Pins And Clips. |
150. | IS 4397: 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. |
151. | IS 4398: 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification |
152. | IS 6902: 1973 | Specification for Steel Wire for spokes. |
153. | IS 6967: 1973 | Specification for Steel For Electrically welded round Link Chains. |
154. | IS 7226: 1974 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. |
155. | IS 7557: 1982 | Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. |
156. | IS 8052: 2006 | Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification. |
157. | IS 8951: 2001 | Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification |
158. | IS 8952: 1995 | Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification |
159. | IS 9476: 1980 | Specification for Cold rolled steel strips for carbon steel razor blades. |
160. | IS 9962: 1981 | Specification for Steel Wire for Needles. |
161. | IS 12367:1988 | Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes. |
162. | IS 14331:1995 | Steels for High Temperature Bolting Applications – Specification |
163. | IS 14491:1997 | Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification |
164. | IS 14650:1999 | Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification |
165. | IS 4882: 1979 | Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry |
166. | IS 2090:1983 | Specification for High Tensile Steel Bars used in Pre-stressed Concrete |
167. | IS 6529:1996 | Stainless Steel Blooms Billets And Slabs For Forging |
168. | IS 9294:1979 | Cold-Rolled Stainless Steel Strips for Razor Blades |
169. | IS 10631:1983 | Stainless Steel for welding electrode core wire |
170. | IS 10632 (Part 2):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire. |
171 | IS 10632 (Part 3):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates. |
172 | IS 11169 (Part 2): 1989 | Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel |
173 | IS 5651:1987 | Steels for Pneumatic Tools |
174 | IS 9516:1980 | Heat Resisting Steels |
175 | IS 11952:1986 | Steels For Piston Pins (Gudgeon Pins) |
176 | IS 12045:1987 | Alloys Used in Electrical Resistance Metallic Heating Elements |
177 | IS 14652:1999 | 18 Percent Nickel Maraging Steel Bars and Rods |
178 | IS 1566:1982 | Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement |
179 | IS 5489: 1975 | Carburizing Steels For Use in Bearing Industry. |
180 | IS 11946:1987 | Soft Magnetic Iron Strips |
181 | IS 11947:1987 | Soft Magnetic Iron Rods, Bars Flats and Sections |
182 | IS 963: 1958 | Chrome molybdenum steel bars and rods for aircraft purposes |
183 | IS 4454 (Part 4): 2001 | Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire |
184. | IS 1993 : 2018 | Cold-reduced Electrolytic Tin Plate |
185. | IS 12591:2018 | Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel |
186. | IS 412:1975 | Expanded Metal Steel Sheets For General Purposes |
187. | IS 2100: 1970 | Steel Billets,Bars And Sections For Boilers |
188. | IS 2589: 1975 | Hard Drawn Steel Wire For Upholstery Springs |
189. | IS 3298: 1981 | Mild Steel Rivet Bars For Ship Building |
190. | IS 4072: 1975 | Steel For Spring Washers |
191. | IS 8510 (Part II): 1977 | Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires |
192. | IS 8510 (PartIII): 1977 | Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires |
193. | IS 8563: 1977 | Half Round Mild Steel Wire For The Manufacture of Split Pins |
194. | IS 8564: 1977 | Steel Wire For Nipples For Spokes |
195. | IS 8565: 1977 | Heald Wire |
196. | IS 8566: 1977 | Steel Wire For Reeds |
197. | IS 8917: 1978 | Plates For Galvanizing Pots |
198. | IS 9442: 1980 | Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs |
199. | IS 9485: 1980 | Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling |
200. | IS 10794: 1984 | Mild steel wire for cotter pins |
201. | IS 12262:1988 | Trapezoidal Steel Wire For Springs Washers |
202 | IS 12313: 1988 | Hot-Dip Terne Coated Carbon Steel Sheets |
203 | IS 15911:2010 | Structural Steel (Ordinary Quality) |
204 | IS 4430: 1979 | Mould Steels |
205 | IS 4431: 1978 | Carbon And Carbon- Manganese Free- Cutting Steels |
206 | IS 4432: 1988 | Case Hardening Steels |
207 | IS 5518: 1996 | Steels For Die Blocks For Drop Forging |
208 | IS 8748: 1978 | Forged/Rolled CTC Segments |
209 | IS 12145: 1987 | Quenched And Tempered Alloy Steel Forgings For Pressure Vessels |
210 | IS 13387: 1992 | Tool Steel Forgings For Metal Forming |
211 | IS 14698:1999 | Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services |
212 | IS/ISO 11951 : 2016 | Cold – Reduced tinmill products – Blackplate |
213 | IS 3930: 1994 | Flame And Induction Hardening Steels |
214 | IS 5478: 1969 | Thermostat Metal Sheet and Strip |
215 | IS 13352: 1992 | Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs |
216 | IS 16644: 2018 | Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete |
217 | IS 17404 : 2020 | Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips |
218. | IS 8329 : 2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage |
219. | IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage |
220. | IS 1161:2014 | Steel tubes for structural purposes |
221. | IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes |
222. | IS 4270:2001 | Steel tubes used for water-wells (upto 200 mm dia) |
223. | IS 9139:1979 | Specification for Malleable iron shots and grits for use in foundries |
Electrical Transformers | ||
224. | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed |
Electrical Motors | ||
225. | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage |
Capacitors | ||
226. | IS 2993 | A.C. motor capacitors |
227. | IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V |
228. | IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation |
Chemicals, Fertilizers, Polymers & Textiles | ||
229. | IS 252:2013 | Caustic Soda -Specification |
230. | IS 10116 : 2015 | Boric Acid – Specification |
231. | IS 15573 | Poly Aluminium Chloride |
232. | IS 695 | Acetic Acid |
233. | IS 2833 | Aniline |
234. | IS 517 | Methanol |
235. | IS 5158: 1987 | Specification for Phthalic Anhydride, Technical |
236. | IS 8058:2018 | Pyridine |
237. | IS 16113:2013 | Gamma Picoline |
238. | IS 16112:2013 | Beta Picoline |
239. | IS 12084: 2018 | Morpholine |
240. | IS 297:2001 | Sodium Sulphide, Technical |
241. | IS 7129:1992 | Potassium Carbonate, Anhydrous |
242. | IS 170:2004 | Acetone |
243. | IS 4581:1978 | Phosphorous Trichloride, pure and Analytical Reagent |
244. | IS 11744:1986 | Phosphorous Pentachloride, Technical |
245. | IS 11657:1986 | Phosphorous Oxychloride, Technical |
246. | IS 2080:2021 | Stabilized Hydrogen Peroxide |
247. | IS 3205:1984 | Precipitated Barium Carbonate, Technical |
248. | IS 12928:1990 | Precipitated Barium for Ceramic and Glass Industry |
249. | IS 4505:2015 | Sodium Formaldehyde Sulphoxylate |
250. | IS 6100:1984 | Sodium Tripolyphosphate, Anhydrous, Technical |
251. | IS 14709:1999 | n- Butyl Acrylate |
252. | IS 336:1973 | Ether |
253. | IS 5295:1985 | Ethylene Glycol |
254. | IS 537:2011 | Toluene |
255. | IS 15030:2001 | Terephthalic Acid |
256. | IS 14707: 1999 | Methyl Acrylate |
257. | IS 14708:1999 | Ethyl Acrylate |
258. | IS 12345:1988 | Vinyl Acetate Monomer |
259. | IS 4105:2020 | Styrene (Vinyl Benzene) |
260. | IS 5149:2020 | Maleic Anhydride, Technical |
261. | IS 12540:1988 | Acrylonitrile |
262. | IS 17265:2019 | 100 Percent. Polyester Spun Grey and White Yarn (PSY) |
263. | IS 17261:2019 | Polyester Continuous Filament Fully Drawn Yarn (FDY) |
264. | IS 17264:2019 | Polyester Industrial Yarn (IDY) |
265. | IS 17262:2019 | Polyester Partially Oriented Yarn (POY) |
266. | IS 17263:2019 | Polyester Staple Fibres (PSF) |
267. | IS 7328:2020 | Polyethylene Material for moulding and extrusion (i) Low Density Polyethylene (LDPE) (ii) Linear Low-Density Polyethylene (LLDPE) (iii) High Density Polyethylene (HDPE) |
268. | IS 11356:2020 | Styrene-Butadiene Rubber Latex |
269. | IS 16481:2016 | Synthetic Micro-Fibres for use in Cement Based Matrix |
270. | IS 12795:2020 | Linear Alkyl Benzene |
271. | IS 13601:1993 | Ethylene Vinyl Acetate (EVA) Copolymers |
272. | IS 7686:2020 | 3(N, N-DiEthyl) Aminophenol |
273. | IS 4566:2020 | Methylene Chloride (Dichloromethane) |
274. | IS 2012:2006 | Red Phosphorus |
275. | IS 17077 :2019/ISO 19062-1 : 2015 | Acrylonitrile Butadiene Styrene (ABS) |
276. | IS 869:2020 | Ethylene Dichloride |
277. | IS 17370:2020 | p-Xylene |
278 | IS 14434:1998 | Polycarbonate |
279 | IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014 | Polyurethanes |
280 | IS 17442:2020 | Vinyl Chloride Monomer |
281 | IS 17450 : 2020 | 1,3 Phenylenediamine |
282 | IS 10931 : 1984 | Lauric Acid |
283 | IS 12029 : 1986 | Acid Oil |
284 | IS 12067: 1987 | Palm Fatty Acids |
285 | IS 12068 :1987 | Rice Bran Fatty Acids |
286 | IS 12069 : 1987 | Coconut Fatty Acids |
287 | IS 12124 : 1987 | Rubberseed Fatty Acids |
288 | IS 12361 :1988 | Hydrogenated Rice Bran Fatty Acids |
Kitchen Appliances | ||
289. | IS 302 (Part 2/ Section 14) | Hand-held Blender |
290. | IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer |
Domestic Water Heaters for use with LPG | ||
291. | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls | ||
292. | IS 1391 (Part-1): 2017 | Room Air Conditioners- Specification Part 1 Unitary Air Conditioners |
293. | IS 1391 (Part-2): 2018 | Room Air Conditioners- Specification Part 2 Split Air Conditioners |
294. | IS 8148:2018 | Ducted and Package Air Conditioners |
295. | IS 11329:2018 | Finned type Heat Exchanger for Room Air Conditioner |
296. | IS 10617:2018 | Hermetic compressor Hermetic Compressors-Specification |
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy | ||
297. | IS 1293 : 2005 | Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes |
298. | IS 15884:2010 | Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) |
Domestic Gas Stoves for use with Liquefied Petroleum Gases | ||
299. | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases |
Transparent Float Glass | ||
300. | IS 14900: 2018 | Transparent Float Glass |
Domestic Pressure Cooker | ||
301. | IS 2347:2017 | Domestic Pressure Cooker |
Cables | ||
302. | IS 1554(Part 1) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V |
303. | IS 1554(Part 2) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV |
304. | IS 7098 (Part 1) : 1988 | Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V |
305. | IS 7098 (Part 2) : 2011 | Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV |
306. | IS 7098 (Part 3) : 1993 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV |
307. | IS 14255 : 1995 | Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification |
308. | IS 9968 (Part 2) : 2002 | Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV |
309. | IS 8784 : 1987 | Specification for Thermocouple Compensating Cables |
310. | IS 9857 : 1990 | Welding Cables – Specification |
311. | IS 14494 : 2019 | Elastomer Insulated Flexible Cables for Use in Mines – Specification |
312 | IS 2593 : 1984 | Specification for Flexible Cables for Miner’s Cap-Lamps |
313. | IS 5950 : 1984 | Specification for Shot Firing Cables (for use other than in shafts) |
314. | IS 17048 : 2018 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification |
Rubber Hose for Liquefied Petroleum Gas (LPG) | ||
315. | IS 9573(Part 1):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application |
316. | IS 9573(Part 2):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application. |
Aluminium Foil | ||
317. | IS 15392 | Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
Non Electric Toys | ||
318. | IS 9873 (Part 1) : 2018 | Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties. |
IS 9873 (Part 2) : 2017 | Safety of Toys Part 2 Flammability. | |
IS 9873 (Part 3) : 2017 | Safety Requirements for Toys Part 3 Migration of Certain Elements. | |
IS 9873 (Part 4) : 2017 | Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use. | |
IS 9873 (Part 7) : 2017 | Safety of Toys Part 7 Requirements and Test Methods for Finger Paints. | |
IS 9873 (Part 9) : 2017 | Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products. | |
Electric Toys | ||
319. | IS 15644: 2006 | Safety of Electric Toys. |
Flat Transparent Sheet Glass | ||
320. | IS 2835 : 1987 | Flat Transparent Sheet Glass. |
Safety Glass | ||
321. | IS 2553 (Part 1):2018 | Safety Glass -Specification Part 1 Architectural, Building and General uses. |
322. | IS 2553 (Part 2):2019 | Safety Glass -Specification Part 2 For Road Transport . |
Woven Sacks | ||
323. | IS 14887:2014 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains |
324. | IS 16208:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains |
325. | IS 14968:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar |
326. | IS 14252:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand |
Butterfly Valves | ||
327. | IS 13095:1991 | Butterfly valves for general purpose |
Reflectors for Bicycles | ||
328. | IS/ISO 6742-2:2015 | Retro-reflective Devices |
Paper | ||
329. | IS 14490:2018 | Plain Copier Paper |
Cattle Feeds | ||
330. | IS 2052 : 2009 | Compounded Feeds for Cattle |
Automobile Wheel Rim Component | ||
331. | IS: 16192 (Part 1) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 - Light Alloy Wheel Rims Method of Tests and Requirements |
332. | IS: 16192 (Part 2) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 - Sheet Metal Wheel Rims Method of Tests and Requirements |
333. | IS: 16192 (Part 3) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 - Spoke Wheel Rims Method of Tests and Requirements |
334. | IS: 9436 | Performance Requirements and Methods of Tests for Wheels for Passenger Cars |
335. | IS: 9438 | Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses |
Foot Wear | ||
336. | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots |
337. | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots |
338. | IS 5676: 1995 | Moulded solid rubber soles and heels |
339. | IS 6664: 1992 | Rubber microcellular sheets for soles and heels |
340. | IS 6719: 1972 | Solid PVC soles and heels |
341. | IS 6721: 1972 | PVC sandal |
342. | IS 10702: 1992 | Rubber Hawai Chappal |
343. | IS 11544: 1986 | Slipper, rubber |
344. | IS 12254: 1993 | Polyvinyl chloride(PVC) industrial boots |
345. | IS 13893: 1994 | Polyurethane sole, semirigid |
346. | IS 13995: 1995 | Unlined moulded rubber boots |
347. | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use |
348. | IS 16994: 2018 | Footwear for men and women for municipal scavenging work |
349. | IS 1989 (Part 1): 1986 | Leather safety boots and shoes for miners |
350. | IS 1989 (Part.2): 1986 | Leather safety boots and shoes for heavy metal industries |
351. | IS 3735: 1996 | Canvas Shoes Rubber Sole |
352. | IS 3736: 1995 | Canvas Boots Rubber Sole |
353. | IS 3976: 2018 | Safety Rubber Canvas Boots for Miners |
354. | IS 11226: 1993 | Leather safety footwear having direct moulded rubber sole |
355. | IS 14544: 1998 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole |
356. | IS 15844: 2010 | Sports footwear |
357. | IS 17012: 2018 | High ankle tactical boots with PU – Rubber sole |
358. | IS 17037: 2018 | Antiriot shoes |
359. | IS 17043: 2018 | Derby shoes |
360. | IS 15298 (Part 2): 2016 | Personal protective equipment – Part 2 Safety Footwear |
361. | IS 15298 ( Part 3) : 2019 | Personal protective equipment – Part 3 Protective Footwear |
362. | IS 15298 (Part 4) : 2017 | Personal protective equipment – Part 4 Occupational Footwear |
Press Tool-Punches | ||
363. | IS 4296 (Part 1):2016 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank |
364. | IS 4296 (Part 2):2016 | Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank |
365. | IS 4296 (Part 3):2016 | Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank |
Helmet for riders of Two Wheeler Motor Vehicles | ||
366. | IS 4151: 2015 | Helmet for riders of Two Wheeler Motor Vehicles |
Refrigerating Appliances | ||
367. | IS 17550 (Part 1): 2021 | Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements |
368. | IS 7872: 2018 | Freezers |
Centrifugally cast (Spun) iron pipes | ||
369. | IS 1536: 2001 | Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage |
370. | IS 3989: 2009 | Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories |
371. | IS 15905: 2011 | Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series |
Flux Cored (Tubular) Electrodes | ||
372. | IS 15769:2008 | Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
Sewing Machine | ||
373. | IS 15449 : Part 1 : 2004 | Household Zig-Zag Sewing Machine Head |
Water Treatment System | ||
374. | IS 16240 : 2015 | Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System |
Jute Bag | ||
375. | IS 1943:1995 | A- twill Jute Bag |
376. | IS 2566:1993 | B-twill Jute bags for packing foodgrains |
377. | IS 12650:2018 | Jute bags for packing 50 Kg foodgrains |
378. | IS 15138:2010 | Jute bags for packing 50 Kg sugar |
379. | IS 16186:2014 | Light weight jute sacking bags for packing 50 Kg foodgrains |
380. | IS 16372:2015 | Jute bags for packing up to 30 Kg foodgrains |
381. | IS 17266:2019 | Viscose Staple Fibres |
382. | IS 15351 : 2015 | Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining |
383. | IS 15909 : 2020 | Poly Vinyl Chloride (PVC) Geomembranes |
384. | IS 16653 : 2017 | Needle punched non-woven geobags |
385. | IS 16654: 2017 | Polypropylene Multifilament woven geobags |
386. | IS 14715 (Part 1): 2016 | Jute Geotextiles |
387. | IS 14715 (Part 2): 2016 | Jute Geotextiles |
388. | IS 15869 : 2020 | Open Weave Coir Bhoovastra |
389. | IS 16391 : 2015 | Geotextiles used in sub-grade separation in pavement structures |
390. | IS 16393 : 2015 | Geotextiles used in Subsurface Drainage Application |
391. | IS 16362 : 2020 | Geotextiles used in Sub-grade Stabilisation in pavement structures |
392. | IS 16352 : 2020 | High Density Polyethylene (HDPE) Geomembranes for lining |
393. | IS 16090:2013 | Geotextiles used as protection (or cushioning) materials |
394. | IS 16392:2015 | Geotextiles for permanent erosion control in hard armor systems |
395. | IS 17371:2020 | Geogrids for flexible pavements |
396. | IS 17372:2020 | Polymeric strip or geostrip used as soil reinforcement in retaining structures |
397. | IS 17373:2020 | Geogrids used in reinforced soil retaining structures |
398. | IS 17374:2020 | Reinforced HDPE membrane for effluents and chemical resistance lining |
399. | IS 17483 (Part 1): 2020 | Geocells |
400. | IS 17483 (Part 2): 2020 | Geocells |
401. | IS 15741 : 2007 | Curtains and Drapes |
402. | IS 15768 : 2008 | Upholstered composites used for non-domestic furniture |
403. | IS 16890 : 2018 | Protective clothing for firefighters |
404. | IS 16874 : 2018 | Protective gloves for firefighters |
405. | IS 15748 : 2022 | Protective clothing for industrial workers exposed to heat |
406. | IS 15742 : 2007 | Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame |
407. | IS 15809 : 2017 | High visibility Warning Clothes |
408. | IS 16655 : 2017 | Protective Clothing for use in welding and allied processes |
409. | IS 16725 : 2018 | Tactical 3 point sling |
410. | IS 16726 : 2018 | Pouch for ammunition and grenades made of disruptive pattern nylon-66 |
411. | IS 17051 : 2018 | Bullet resistant jackets |
412. | IS 17286 : 2019 | Water-proof multipurpose rain poncho |
413. | IS/ISO 9994:2018 | Lighters- Safety Specifications |
414. | IS/ISO 22702:2018 | Utility Lighters – Safety Specifications |
415. | IS 17803: 2022 | Potable Water Bottles (Copper, Stainless Steel, Aluminum) |
416. | IS 814 : 2004 | Covered electrodes for manual metal arc welding of carbon and carbon manganese steel |
417. | IS 6419 : 1996 | Welding rode and bare electrodes for gas shielded arc welding of structural steel |
418. | IS 16444 Part 1 | A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 |
419. | IS 16444 Part 2 | A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S |
420. | IS 17790 : 2022 | Insulated Flask for Domestic Use |
421. | IS 17526 : 2021 | Domestic Stainless steel vacuum flask/bottle |
422. | IS 17569: 2021 | Insulated Container for Food Storage |
423. | IS 3513 (Part 1) : 1989 | Resin treated compressed wood laminates (compregs) – For electrical purposes |
424. | IS 3513 (Part 2) : 1989 | Resin treated compressed wood laminates (compregs) – For chemical purposes |
425. | IS 3513 (Part 3) : 1989 | Resin treated compressed wood laminates (compregs) – For general purposes |
426. | IS 1363 (Part 1) :2019 | Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
427. | IS 1363 (Part 2) :2018 | Hexagon Head Screw (Size ranges from M 5 to 64) |
428. | IS 1363 (Part 3) :2018 | Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) |
429. | IS 1364 (Part 1) :2018 | Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) |
430. | IS 1364 (Part 2) :2018 | Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) |
431. | IS 4621:1975 | Indicating Bolts for use in public baths and lavatories |
432. | IS 5187: 1972 | Flush Bolts |
433. | IS 10238:2001 | Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures |
434. | IS 12427 : 2001 | Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts |
435. | IS 3757 : 1985 | High Strength Structural Bolts |
436. | IS 204 (Part 2): 1992 | Tower Bolts- Non-ferrous metal |
437. | IS 204 (Part 1): 1991 | Tower Bolts- Ferrous metals |
438. | IS 15834 : 2022 | Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks |
439. | IS 2681 : 1993 | Non-ferrous metal sliding door bolts (aldrops) for use with padlocks |
440. | IS 281 : 2009 | Mild steel sliding door bolts for use with padlocks |
441. | IS 7534: 1985 | Sliding locking bolts for use with padlocks |
442. | IS 1284 : 1975 | Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes |
443. | IS 15833 : 2009 | Stainless steel Tower Bolts |
444. | IS 6623 : 2004 | High Strength Structural Nuts |
445. | IS 14756 : 2022 | Stainless Steel Cookware |
446. | IS 1660:2009 | Wrought Aluminium Utensils |
447. | IS 13983:1994 | Stainless Steel Sinks for Domestic Purposes |
448. | IS 9396 (Part 1) : 1987 | Round Open Top Sanitary Cans for Foods and Drinks – Tinplate |
449. | IS 14407:1996 | Aluminium cans for beverages |
450. | IS 17153:2019 | Domestic Gas Stoves for use with Piped Natural Gas (PNG) |
451. | IS 15683 : 2018 | Portable Fire Extinguishers |
452. | IS 16018:2012 | Wheeled Fire Extinguishers |
Electric Ceiling Type Fans | ||
453. | IS 374:2019 | Electric Ceiling Type Fans |
Wood Based Boards | ||
454. | IS 1659:2004 | Block Boards |
455. | IS 12823:2015 | Prelaminated particle boards from wood and other Lignocellulosic material |
456. | IS 3087:2005 | Particle boards of wood and other lignocellulosic materials (medium density) for general purpose |
457. | IS 12406:2021 | Medium density fibre boards for general purpose |
458. | IS 3097:2006 | Veneered particle boards |
Cast Iron Products | ||
459. | IS 1726:1991 | Cast iron man hole covers and frames |
460. | IS 1729:2002 | Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series |
461. | IS 1879:2010 | Malleable cast iron pipe fittings |
462. | IS 13349:1992 | Cast iron single faced thimble mounted sluice gates |
463. | IS 210:2009 | Grey iron castings |
464. | IS 1537:1976 | Vertically cast – iron pressure pipes for water, gas and sewage |
Solar DC Cable and Fire Survival Cable | ||
465. | IS 17293:2020 | Electric Cable for Photovoltic Systems for rated voltage 1500V DC |
466. | IS 17505(Part 1): 2021 | Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC |
Metals and Alloys | ||
467. | IS 617:1994 | Cast aluminium and its alloys – Ingots and castings for general engineering purposes |
468. | IS 11890 : 1987 | High purity primary aluminum ingot for remelting for special applications |
469. | IS 6754:1972 | Aluminum alloy ingots for remelting for general engineering purpose |
470. | IS 2590 : 1987 | Primary aluminium ingots for remelting for general engineering purpose |
471. | IS 4026 : 2023 | Aluminum ingots billets and wire bars (EC GRADE) |
472. | IS 191:2007 | Copper |
473. | IS 7506:1987 | Nickel Powder |
Plywood and Wooden flush door shutters | ||
474. | IS 303 : 1989 | Plywood for general purposes |
475. | IS 2202 (Part 1) : 1999 | Wooden flush door shutters (solid core type) – Plywood face panels |
476. | IS 710 : 2010 | Marine plywood |
477. | IS 5509 : 2021 | Fire retardant plywood |
478. | IS 1328 : 1996 | Veneered decorative plywood |
479. | IS 2191 (Part 2): 2022 | Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels |
480. | IS 2191 (Part 1): 2022 | Wooden flush door shutters (cellular and hollow core type) – Plywood face panels |
481. | IS 2202 (Part 2): 2022 | Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels |
482. | IS 4990 : 2011 | Plywood for concrete shuttering works – Specification |
483. | IS 10701 : 2012 | Structural plywood – Specification |
Flux Cored Solder Wire | ||
484. | IS 1921: 2005 | Flux Cored Solder Wire |
Miscellaneous Steel Products | ||
485. | IS 15155 : 2020 | Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials |
486. | IS 16651 : 2017 | High Strength deformed stainless steel bars and wires for concrete reinforcement |
487. | IS 6392 : 2020 | Steel Pipe Flanges |
488. | IS 6913 : 1973 | Stainless steel tubes for the food and beverage industry |
Aluminium and Aluminium Alloy Products | ||
489. | IS 7092 (Part 1):1992 | Aluminium alloy tubes for irrigation purposes -welded tubes |
490. | IS 7092 (Part 2):1987 | Aluminium alloy tube for irrigation purposes – extruded tube |
491. | IS 5484:1997 | EC Grade Aluminium Rod produced by Continuous Casting and Rolling |
492. | IS 733:1983 | Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) |
493. | IS 734:1975 | Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes |
494. | IS 736:1986 | Wrought aluminium and aluminium alloy plate for general engineering purposes |
495. | IS 737:2008 | Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes |
496. | IS 739:1992 | Wrought aluminium and aluminium alloy wire for general engineering purposes |
497. | IS 740:1977 | Wrought aluminium and aluminium alloy rivet stock for general engineering purposes |
498. | IS 5082:1998 | Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |
499. | IS 16011:2012 | Aluminium and aluminium alloy foil for pharmaceutical packaging |
500. | IS 17682:2021 | Aluminium composite panel |
501. | IS 1285:2002 | Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes |
502. | IS 2067:1975 | Wrought Aluminium Wire for Electrical Purposes |
503. | IS 21:1992 | Wrought aluminium and aluminium alloys for manufacture of utensils |
504. | IS 1254:2007 | Corrugated Aluminium Sheet |
505. | IS 7902:2001 | Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications |
506. | IS 2403 :2014 / ISO 606 : 2004 | Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets |
Self- Contained Drinking Water Coolers | ||
507. | IS 1475 (Part 1) : 2001 | Self- Contained Drinking Water Coolers – Energy Consumption and Performance |
Medical Textiles | ||
508. | IS 5405 : 2019 | Sanitary napkins |
509. | IS 17509 : 2021 | Disposable baby diaper |
510. | IS 17514 : 2021 | Reusable Sanitary pad/ Sanitary Napkin/ Period Panties |
511. | IS 17349 : 2020 | Shoe covers |
512. | IS 17354 : 2020 | Dental Bib or Napkins |
513. | IS 17630 : 2021 | Bed sheet and Pillow Cover |
Agro Textiles | ||
514. | IS 16718 : 2021 | Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications |
515. | IS 16513 : 2016 | Insect nets for Agriculture and Horticulture purpose |
516. | IS 16202 : 2014 | Woven Ground covers for Horticulture Application |
517. | IS 17070 : 2019 | Jute Agro textiles for Growth of Plants and Suppression of Weeds |
518. | IS 15907 : 2010 | High Density Polyethylene (HDPE) woven beds for vermiculture |
519. | IS 16089 : 2013 | Sapling bags for growth of seedling /sapling |
520. | IS 16190 : 2014 | High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose |
521. | IS 16390 : 2015 | Nylon Knitted seamless gloves for tobacco harvesters |
522. | IS 16627 : 2017 | High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system |
523. | IS 17355 : 2020 | Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications |
524. | IS 17356 : 2020 | Windshield nets for agriculture and horticulture purpose |
525. | IS 17357 : 2020 | Harvest nets for agriculture and horticulture purposes |
526. | IS 17358 (Part 1) : 2020 | Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh |
527. | IS 17358 (Part 2) : 2020 | Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns |
528. | IS 17513 : 2020 | Plant Support Nets for Agriculture and Horticulture Purposes |
529. | IS 17728 : 2021 | High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System |
530. | IS 17729 : 2021 | Flexible Water Storage Tank for Agriculture and Horticulture Purposes |
531. | IS 17730 (Part 1) : 2021 | Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets |
532. | IS 17730 (Part 2) : 2021 | Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets |
533. | IS 17731 : 2021 | Laminated Woven Orchard Protection Covers |
2. Producten die BIS-Registratie vereisen (Regeling II, verplichte Registratieregeling (CRS))
I. List of Electronics and IT Goods under ‘Compulsory Registration Scheme’ for Self Declaration of conformity-Notified by Ministry Of Electronics And Information Technology | |||
Sl. No. | IS No. | Title | Product Category |
1. | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Electronic Games (Video) |
2. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Laptop/Notebook/Tablets |
3. | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Plasma/ LCD/LED Televisions of screen size 32″ & above |
4. | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Optical Disc Players with built in amplifiers of input power 200W and above |
5. | IS 302-2-25 | Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens | Microwave Ovens |
6. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Visual Display Units, Video Monitors of screen size 32″ & above |
7. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Printers, Plotters |
8. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Scanners |
9. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Wireless Keyboards |
10. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Telephone Answering Machines |
11. | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Amplifiers with input power 2000W and above |
12. | IS 616 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Electronic Musical Systems with input power 200W and above |
13. | IS 302-2:26 | Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks | Electronic Clocks with Mains Powers |
14. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Set Top Box |
15. | IS 13252 (Part 1) | Information Technology Equipment – Safety – General Requirements | Automatic Data Processing Machine |
16. | IS 13252 (Part 1) | Information Technology Equipment- Safety General Requirements | Power Adaptors for IT Equipments |
17. | IS 616 | Audio, Video and Similar Electronic Apparatus-Safety Requirements | Power Adaptors for Audio, Video & Similar Electronic Apparatus |
18. | IS 16242 (Part 1) | General and Safety Requirements for UPS | UPS/Invertors of rating≤5kVA |
19. | IS 15885 (Part 2/Sec 13) | Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED Modules | DC or AC Supplied Electronic Control gear for LED Modules |
20. | IS 16046 | Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications | Sealed Secondary Cells/Batteries containing Alkaline or other non-acid Electrolytes for use in portable applications |
21. | IS 16102(Part 1) | Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements | Self-Ballasted LED Lamps for General Lighting Services |
22. | 10322 (Part 5/Sec 1) | Luminaries Part 5 Particular Requirements Sec 1 Fixed General purpose luminaries | Fixed General Purpose LED Luminaries |
23. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Mobile Phones |
24. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Cash Registers |
25. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Point of Sale Terminals |
26. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Copying Machines/Duplicators |
27. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Smart Card Readers |
28. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Mail Processing Machines/Postage Machines/Franking Machines |
29. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Passport Reader |
30. | IS 13252 (Part 1) | Information Technology Equipment-Safety-General Requirements | Power Banks for use in portable applications |
31. | IS 16333 (Part-3) | Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific Requirements | Mobile Phones |
32. | IS 10322 (Part 5/Section 2): 2012 | Luminaires Part 5: Particular Requirements Section 2 Recessed Luminaires | Recessed LED Luminaries |
33. | IS 10322 (Part 5/Section 3): 2012 | Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street Lighting | LED Luminaires for Road and Street lighting |
34. | IS 10322 (Part 5/Section 5): 2013 | Luminaires – Part 5: Particular Requirements Section 5 Flood Lights | LED Flood Lights |
35. | IS 10322 (Part 5/Section 6): 2013 | Luminaires – Part 5: Particular Requirements Section 6 Hamp Lamps | LED Hand lamps |
36. | IS 10322 (Part 5/Section 7): 2013 | Luminaires – Part 5: Particular Requirements Section 7 Lighting Chains | LED Lighting Chains |
37. | IS 10322 (Part 5/Section 8): 2013 | Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency Lighting | LED Luminaires for Emergency Lighting |
38. | IS 16242 (Part 1):2014 | General and Safety Requirements for UPS | UPS/Inverters of rating ≤ 10kVA |
39. | IS 616:2010 | Audio, Video and Similar Electronic Apparatus – Safety Requirements | Plasma/ LCD/LED Television of screen size up-to 32” |
40. | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | Visual Display Units, Video Monitors of screen size up-to 32” |
41. | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | CCTV Cameras/CCTV Recorders |
42. | IS 302 (Part 1): 2008 | Safety of Household and similar electrical appliances Part 1 General requirements | Adapters for household and similar electrical appliances |
43. | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | USB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners |
44. | IS 13252 (Part 1):2010 | Information Technology Equipment –Safety General Requirements | Smart watches |
45. | IS 16103 (Part 1): 2012 | LED modules for general lighting: Part 1 safety requirements | Standalone LED Modules for General Lighting |
46. | IS 10322 (Part 5)Section 9: 2017 | Luminaries: Part 5 Particular Requirements Section 9 Rope Lights | Lighting Chain (Rope Lights) |
47. | IS 13252 (Part 1) :2010 | Information technology equipment – safety part 1 general requirements | Keyboard |
48. | IS 302 (Part 2): Section 6: 2009 | Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliances | Induction Stove |
49. | IS 13252 (Part 1) :2010 | Information technology equipment – safety part 1 general requirements | Automatic Teller Cash dispensing machines |
50. | IS 13252 (Part 1) :2010 | Information technology equipment – safety part 1 general requirements | USB Type External Hard Disk Drive |
51. | IS 616: 2017 | Audio, video and similar electronic apparatus-safety requirements | Wireless Headphone and Earphone |
52. | IS 13252 (Part 1) :2010 | Information technology equipment – safety part 1 general requirements | USB Type External Solid- State Storage Devices (above 256 GB capacity) |
53. | IS 616: 2017 | Audio, video and similar electronic apparatus-safety requirements | Electronic Musical System with input power below 200 Watts |
54. | IS 13252 (Part 1) :2010 | Information technology equipment – safety part 1 general requirements | Standalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max) |
55. | IS 616: 2017 | Audio, video and similar electronic apparatus-safety requirements | Television other than Plasma/ LCD/LED TVs |
56. | IS 302 (Part 2): Section 15: 2009 | safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquids | Rice Cooker |
57. | IS 616:2017 | Audio, video and similar electronic apparatus-safety requirements | Wireless microphone |
58. | IS 13252 (Part 1): 2010 | Information technology equipment – safety part 1 general requirements | Digital Camera |
59. | IS 616:2017 | Audio, video and similar electronic apparatus-safety requirements | Video Camera |
60. | IS 616:2017 | Audio, video and similar electronic apparatus-safety requirements | Webcam (Finished Product) |
61. | IS 616:2017 | Audio, video and similar electronic apparatus-safety requirements | Smart Speakers (with and without Display) |
62. | IS 60669-2-1: 2008 | Particular requirements for Electronic switches standards for Switches for household and similar fixed electrical installations. | Dimmers for LED products |
63. | IS 616:2017 | Audio, video and similar electronic apparatus-safety requirements. | Bluetooth speakers |
64. | IS 18112:2022 | Digital Television Receiver for Satellite Broadcast Transmission – Specification | Television Sets |
II. List of Solar Photovoltaics, Systems, Devices and Components under Compulsory Registration Scheme- Notified by Ministry Of New and Renewable Energy | |||
Sl. No. | IS No. | Title | Product Category |
1. | IS 14286 IS/IEC 61730 -1 IS/IEC 61730 -2 | Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type Approval | Crystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based) |
2. | IS 16077 IS/IEC 61730 -1 IS/IEC 61730 -2 | Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval | Thin-Film Terrestrial Photovoltaic (PV) Modules (a-Si, CiGs and CdTe) |
3. | IS 16221 (Part 2) | Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for Inverters | Power converters for use in photovoltaic power system |
4. | IS 16169 | Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic Inverters | Utility –Interconnected Photovoltaic inverters |
5. | IS 16270 | Secondary Cells and Batteries for Solar Photovoltaic Application General-Requirements and Methods of Test | Storage battery |
III. List of chemicals notified by Ministry of Chemicals and Fertilizers. | |||
Sl. No. | IS No. | Title | Product Category |
1. | IS 798:2020 | Ortho Phosphoric Acid – Specification | Ortho Phosphoric Acid |
2. | IS 17439:2020 | Polyphosphoric Acid – Specification | Polyphosphoric Acid |
3. | IS 17412:2020 | Trimethyl Phosphite – Technical Grade | Trimethyl Phosphite |
IV. List of Textile material notified by Ministry of Textiles | |||
Sl. No. | IS No. | Title | Product Category |
1. | IS 12171:2019 | Cotton Bales- Specification | Cotton Bales |
3. Producten die BIS-Certificering vereisen (Regeling X)
S. No. | IS Standard | Product |
1. | IS/IEC 60947: Part 2: 2016 | Circuit-breakers |
2. | IS/IEC 60947: Part 3: 2012 | Switches, disconnectors, switch disconnectors and fuse-combination units |
3. | IS/IEC 60947: Part 4: Sec 1: 2012 | Contactors and motor-starters, electromechanical contactors, and motor |
4. | IS/IEC 60947: Part 4: Sec 2: 2011 | Contactors and motor-starters, AC semiconductor motor controllers and starters |
5. | IS/IEC 60947: Part 4: Sec 3: 2014 | Contactors and motor-starters, AC semiconductor motor controllers and contactors for non-motor loads |
6. | IS/IEC 60947: Part 5: Sec 1: 2009 | Control circuit devices and switching elements, electromechanical control circuit devices |
7. | IS/IEC 60947: Part 5: Sec 2: 2007 | Control circuit devices and switching elements, proximity switches |
8. | IS/IEC 60947: Part 5: Sec 5: 2016 | Control circuit devices and switching elements, electrical emergency stop devices with mechanical latching function |
Neem contact met ons op!
MPR India Certification – Betrouwbaar advies en realisatie van certificeringsprojecten wereldwijd.