MPR Kontakt Icon
Choose language
MPR Suche
MPR Close
Schließen
Zurück

New Product Groups for ISI and CRS Certifications from Bureau of Indian Standards (BIS) in India

28. January 2021

In 2020, extensive additions were made to the product lists for ISI and CRS certification by the Bureau of Indian Standards (BIS). A total of 269 new product groups were brought under mandatory certification, 242 of the newly added product groups fall under the ISI mode of the BIS certification, 27 under the simplified CRS mode.
It seems the government under Premier Modi has taken advantage of the uncertain economic situation during the Corona crisis to further expand the regulatory framework. This expansion is entirely in light of the 2023 Plan of 2019, through which the Premier Modi set a goal for the government to ensure quality, safety, and reliability of products. It is likely that the lists will be expanded throughout the next few years.
 

 
In general, product tests in India are required for BIS certification and in the case of ISI certification, a factory inspection is also required. It also covers a wide range of products: From steel to household products, chemicals and electronics to toys and various other products need to be certified. Most of the products in that list were just added in 2020. You can find the complete list of the newly added product groups at the end of this article.
The CRS certification requirement mainly covers IT products, as well as other electronics.
List of newly added products under the CRS Scheme of BIS Certification:

ProduktkategorieStandardInkrafttreten
Independent LED Modules for General LightingIS 16103 (Part 1) : 201201. Apr 21
Lighting Chain (Rope Lights)IS 10322 (Part 5/Sec 9) : 201701. Apr 21
KeyboardIS 13252 (Part 1) : 201001. Apr 21
Induction StoveIS 302-2-6 : 200901. Apr 21
Automatic Teller Cash dispensing machinesIS 13252 (Part 1) : 201001. Apr 21
USB Type External Hard Disk DriveIS 13252 (Part 1) : 201001. Apr 21
Wireless Headphone and EarphoneIS 616 : 201701. Apr 21
USB Type External Solid-State Storage Devices (above 256 GB capacity)IS 13252 (Part 1) : 201001. Apr 21
Electronic Musical System with input power below 200 WattsIS 616 : 201701. Apr 21
Standalone Switch Mode Power Supplies (SMPS) with output voltage 48V (max)IS 13252 (Part 1) : 201001. Apr 21
Television other than Plasma/ LCD/LED TVsIS 616 : 201701. Apr 21
Rice CookerIS 302-2-15 : 200901. Apr 21
Wireless MicrophoneIS 616 : 201701. Apr 21
Digital CameraIS 13252 (Part 1) : 201001. Apr 21
Video CameraIS 616 : 201701. Apr 21
Webcam (Finished Product)IS 616 : 201701. Apr 21
Smart Speakers (with and without Display)IS 616 : 201701. Apr 21
Dimmers for LED productsIS 60669-2-1: 200801. Apr 21
Bluetooth SpeakersIS 616 : 201701. Apr 21
Low – Voltage switchgear and controlgear: Circuit – BreakersIS/IEC 60947-2 : 201611. Nov 21
Low – Voltage switchgear and controlgear: switches, disconnectors, switch disconnectors and fuse – Combination unitsIS/IEC 60947-3 : 201211. Nov 21
Low – Voltage switchgear and controlgear: electromechanical contactors and motor – StartersIS/IEC 60947-4-1 : 201211. Nov 21
Low – Voltage switchgear and controlgear: a.c semiconductor motor controllers and startersIS/IEC 60947-4-2 : 201111. Nov 21
Low – Voltage switchgear and controlgear: a.c. semiconductor motor controllers and contactors for non – Motor loadsIS/IEC 60947-4-3 : 201411. Nov 21
Low – Voltage switchgear and controlgear: electromechanical control circuit devicesIS/IEC 60947-5-1 : 200911. Nov 21
Low – Voltage switchgear and controlgear proximity switchesIS/IEC 60947-5-2 : 200711. Nov 21
Low – Voltage switchgear and controlgear: electrical emergency stop devices with mechanical latching functionIS/IEC 60947-5-5 : 201611. Nov 21

 


Liste neuer Produkte unter der ISI-Liste der BIS-Zertifizierung:

ProduktkategorieStandardInkrafttreten
Stahl
Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved WireIS 1785 (Part 1) : 1983Steel and Steel Products (Quality Control) Order, 2020
S.O. 756(E) , dated 14-02-2020
Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wireIS 1785 (Part 2) : 1983Superseded by Steel and Steel Products (Quality Control) Order, 2020
Indented wire for Pre-stressed concreteIS 6003:2010Superseded by Steel and Steel Products (Quality Control) Order, 2020
Uncoated stress relieved strand for Pre-stressed concrete.IS 6006:2014Extension in date of enforcement for Steel Products Order File.No. S-20011/1/2020-TECH dated 22.07.2020
Fusion bonded epoxy coated reinforcing barsIS 13620:199312. Superseded by Steel and Steel Products (Quality Control) Order, 2020
Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.IS 14268:1995
Galvanized steel sheets ( plain and corrugated).IS 277:2003
Steel plates for pressure vessels for intermediate and high temperature service including boilers.IS 2002:2009
Steel plates for pressure vessels used at moderate and low temperatureIS 2041:2009
Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purposeIS 2830:2012
High strength deformed steel bars and wires for concrete reinforcementIS 1786:2008
Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)IS 648:2006
Grain oriented electrical steel sheet & strip (CRGO)IS 3024:2015
Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.IS 15391:2003
Hot rolled medium and high tensile structural steelIS 2062:2011
Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel barsIS 432 : Part 1:1982
Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel WireIS 432 : Part 2:1982
Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing PurposeIS 513 (Part-1): 2016
Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase SteelIS 432 : Part 2 : 1982
Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification.IS 1079: 2017
Carbon steel billets, blooms, slabs and bars for forgings.IS 1875:1992
Mild steel for metal arc welding electrodes.IS 2879:1998
Steel Chequered PlatesIS 3502:2009
Cold Rolled Steel Strips (Box Strappings).IS 5872:1990
Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.IS 5986: 2017
Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas CylindersIS 6240:2008
Hot Rolled bars for production of bright bars and machined parts for engineering applications.IS 7283:1992
Mild steel wire rods for general engineering purposes.IS 7887:1992
Hot Rolled Steel Strip for Welded Tubes and Pipes.IS 10748:2004
Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — SpecificationIS 11513:2017
Hot rolled steel narrow width strip for welded tubes and pipesIS 15647:2006
High carbon steel wire rods- SpecificationIS 7904:2017
Continuously pre-painted galvanized steel sheets and coilsIS 14246:2013
Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).IS 15965:2012
Mild steel wire for General Engineering purposes.IS 280: 2006
Round Steel wire for ropesIS 1835:1976
Low Carbon Galvanized steel wires formed wires and Tapes for armouring of CablesIS 3975:1999
Alloy Steel billets, blooms and slabs for forging for general engineering purposes.IS 4368:1967
Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.IS 4454 (Part 1) : 2001
Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.IS 4454 (Part 2): 2001
Bead Wires for TyresIS 4824:2006
Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steelsIS 11169 (Part 1): 1984
Structural Weather resistant steel.IS 11587:1986
Fire resistant Steel- SpecificationIS 15103: 2002
High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.IS 15914:2011
Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)IS 15961:2012
Structural Steel for Building for Structures with improved seismic ResistanceIS 15962:2012
Stainless Steel wire RodIS 6527:1995
Stainless Steel WiresIS 6528:1995
Stainless Steel Bars and FlatsIS 6603:2001
Stainless Steel sheets and strips for utensils- SpecificationIS 5522:2014
Stainless Steel Plate, Sheet and Strip- SpecificationIS 6911:2017
Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- SpecificationIS 15997:2012
Ferrosilicon – SpecificationIS 1110 : 1990
Specification for FerronickelIS 4409 : 1973
Specification for Hot rolled steel strip (bailing)IS 1029 : 1970
Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plateIS 2385 : 1977
Specification for Structural steel for construction of hulls of shipsIS 3039 : 1988
Bright steel bars – v SpecificationIS 9550 2001
Tool and die steels – SpecificationIS 3748 : 1990
Steel for hardening and tempering – SpecificationIS 5517 : 1993
Specification for High speed tool steelsIS 7291 : 1981
Specification for Steel for valves for internal combustion enginesIS 7494 : 1981
Specification for Carbon manganese steel forgings for pressure vesselsIS 12146 : 1987
Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.IS 16585 : 2016
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – SpecificationIS 2831 : 2012
Steel Rivet Bars (medium And High Tensile) – For Structural PurposesIS 1148: 2009
Specification for Mild Steel Wire, Cold Heading QualityIS 1673: 1984
Specification for Carbon Steel Wire for the Manufacture of Wood ScrewsIS 1812: 1982
Specification for Cold – rolled Steel Strips For Springs.IS 2507: 1975
Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).IS 2255: 1977
Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .IS 3195: 1992
Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.IS 3431: 1982
Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.IS 3885-Part-1: 1992
Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.IS 3885-Part- 2: 1992
Specification for Steel Wire for Umbrella Ribs .IS 4223: 1975
Specification for Steel Wire for Staples, Pins And Clips.IS 4224: 1972
Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.IS 4397: 1999
Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- SpecificationIS 4398: 1994
Specification for Steel Wire for spokes.IS 6902: 1973
Specification for Steel For Electrically welded round Link Chains.IS 6967: 1973
Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.IS 7226: 1974
Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.IS 7557: 1982
Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.IS 8052: 2006
Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- SpecificationIS 8951: 2001
Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – SpecificationIS 8952: 1995
Specification for Cold rolled steel strips for carbon steel razor blades.IS 9476: 1980
Specification for Steel Wire for Needles.IS 9962: 1981
Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes.IS 12367:1988
Steels for High Temperature Bolting Applications – SpecificationIS 14331:1995
Low carbon high strength cold rolled steel sheets and coils for cold forming- SpecificationIS 14491:1997
Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- SpecificationIS 14650:1999
Specification for Low Carbon Steel Wire for Rivets for use in Bearing IndustryIS 4882: 1979
Specification for High Tensile Steel Bars used in Pre-stressed ConcreteIS 2090:1983
Stainless Steel Blooms Billets And Slabs For ForgingIS 6529:1996
Cold-Rolled Stainless Steel Strips for Razor BladesIS 9294:1979
Stainless Steel for welding electrode core wireIS 10631:1983
Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.IS 10631 (Part 2):1983
Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.IS 10631 (Part 3):1983
Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steelIS 11169 (Part 2): 1989
Steels for Pneumatic ToolsIS 5651:1987
Heat Resisting SteelsIS 9516:1980
Steels For Piston Pins (Gudgeon Pins)IS 11952:1986
Alloys Used in Electrical Resistance Metallic Heating ElementsIS 12045:1987
18 Percent Nickel Maraging Steel Bars and RodsIS 14652:1999
Specification for Hard-drawn Steel Wire Fabric For Concrete ReinforcementIS 1566:1982
Carburizing Steels For Use in Bearing Industry.IS 5489: 1975
Soft Magnetic Iron StripsIS 11946:1987
Soft Magnetic Iron Rods, Bars Flats and SectionsIS 11947:1987
Chrome molybdenum steel bars and rods for aircraft purposesIS 963: 1958
Steel Wires for Mechanical Springs- Part 4: Stainless Steel WireIS 4454 (Part 4): 2001
Cold-reduced Electrolytic Tin PlateIS 1993 : 2018
Cold-reduced Electrolytic Chromium/Chromium oxide – coated steelIS 12591:2018
Expanded Metal Steel Sheets For General PurposesIS 412:1975
Steel Billets,Bars And Sections For BoilersIS 2100: 1970
Hard Drawn Steel Wire For Upholstery SpringsIS 2589: 1975
Mild Steel Rivet Bars For Ship BuildingIS 3298: 1981
Steel For Spring WashersIS 4072: 1975
Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wiresIS 8510 (Part II): 1977
Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wiresIS 8510 (PartIII): 1977
Half Round Mild Steel Wire For The Manufacture of Split PinsIS 8563: 1977
Steel Wire For Nipples For SpokesIS 8564: 1977
Heald WireIS 8565: 1977
Steel Wire For ReedsIS 8566: 1977
Plates For Galvanizing PotsIS 8917: 1978
Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural DiscsIS 9442: 1980
Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain EnamellingIS 9485: 1980
Mild steel wire for cotter pinsIS 10794: 1984
Trapezoidal Steel Wire For Springs WashersIS 12262:1988
Hot-Dip Terne Coated Carbon Steel SheetsIS 12313: 1988
Structural Steel (Ordinary Quality)IS 15911:2010
Mould SteelsIS 4430: 1979
Carbon And Carbon- Manganese Free- Cutting SteelsIS 4431: 1978
Case Hardening SteelsIS 4432: 1988
Steels For Die Blocks For Drop ForgingIS 5518: 1996
Forged/Rolled CTC SegmentsIS 8748: 1978
Quenched And Tempered Alloy Steel Forgings For Pressure VesselsIS 12145: 1987
Tool Steel Forgings For Metal FormingIS 13387: 1992
Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence ServicesIS 14698:1999
Cold – Reduced tinmill products – BlackplateIS/ISO 11951 : 2016
Flame And Induction Hardening SteelsIS 3930: 1994
Thermostat Metal Sheet and StripIS 5478: 1969
Stock for Forgings produced from Continuously Cast Blooms, Billets and SlabsIS 13352: 1992
Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed ConcreteIS 16644: 2018
Specification for Malleable iron shots and grits for use in foundriesIS 9139:197915. Malleable Iron Shots and Grits (Quality Control) Order, 2020
Automotive
Flat Transparent Sheet Glass.IS 2835 : 198761. Flat Transparent Sheet Glass (Quality Control ) Order, 2020
(S.O. 738(E) dated 14th February 2020)
Flat transparent Sheet Glass (Quality Control) (Amendment) Order, 2020
(S.O.2017(E) dated 23/06/2020)
Safety Glass -Specification Part 1 Architectural, Building and General uses.IS 2553 (Part 1):201862. Safety Glass (Quality Control ) Order, 2020
(S.O. 1045(E) dated 12th March 2020)
Safety Glass (Quality Control) Amendment Order, 2020
(S.O.2018(E) dated 23/06/2020)
Safety Glass (Quality Control) Second Amendment Order, 2020
Safety Glass -Specification Part 2 For Road Transport .IS 2553 (Part 2):2019(S.O. No. 3190 (E) dated 18/09/2020)
Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1IS: 16192 (Part 1)68. Automobile Wheel Rim Component (Quality Control) Order, 2020
Light Alloy Wheel Rims Method of Tests and Requirements(S.O. 3227(E) dated 21/09/2020)
Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2IS: 16192 (Part 2)
Sheet Metal Wheel Rims Method of Tests and Requirements
Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3IS: 16192 (Part 3)
Spoke Wheel Rims Method of Tests and Requirements
Performance Requirements and Methods of Tests for Wheels for Passenger CarsIS: 9436
Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and BusesIS: 9438
Helmet for riders of Two Wheeler Motor VehiclesIS 4151: 201573. Helmet for riders of Two Wheeler Motor Vehicles (Quality Control) Order, 2020
(S.O. No. 4252 (E) 26/11/2020)
Chemikalien
Acetic AcidIS 69522. Acetic Acid (Quality Control) Order, 2019
(S.O. 2791 (E) dated 05/08/2019)
Amendent in Acetic Acid (Quality Control) Order, 2019
(S.O.344 (E) dated 24th January 2020)
Amendment in Acetic Acid (Quality Control) Order, 2019
(S.O. 2179(E) dated 01/07/2020)
Acetic Acid QCO extension Order
AnilineIS 283323. Aniline (Quality Control) Order, 2019
(S.O. 2792 (E) dated 05/08/2019)
Aniline (Quality Control) Order, 2019
(S.O.203 E) dated 15th January 2020)
Amendment in the Aniline (Quality Control) Order, 2020
(S.O. 2180(E) dated 01/07/2020)
Aniline QCO extension Order
MethanolIS 51724. Methanol (Quality Control) Order, 2019
(S.O. 2793 (E) dated 05/08/2019)
Amendent in Methanol (Quality Control) Order, 2019
(S.O. 345(E)dated 24th January 2020)
Amendment in the Methanol (Quality Control) Order, 2019
(S.O. 2181(E) dated 01/07/2020)
Methanol QCO extension Order
Specification for Phthalic Anhydride, TechnicalIS 5158: 198725. Phthalic Anhydride (Quality Control) Order, 2020.
S.O. 1402(E) dated 23rd April, 2020
PyridineIS 8058:201826. Pyridine (Quality Control) Order, 2020.
(S.O.1890(E) dated 16 /06/2020)
Gamma PicolineIS 16113:201327. Gamma Picoline (Quality Control) Order, 2020
(S.O.1891(E) dated 16 /06/2020)
Beta PicolineIS 16112:201328. Beta Picoline (Quality Control) Order, 2020
(S.O.1892(E) dated 16 /06/2020)
MorpholineIS 12084: 201829. Morpholine (Quality Control) Order, 2020
(S.O.1893(E) dated 16 /06/2020)
Sodium Sulphide, TechnicalIS 297:200130. Sodium Sulphide (Quality Control) Order, 2020
(S.O.1894(E) dated 16 /06/2020)
Potassium Carbonate, AnhydrousIS 7129:199231. Potassium Carbonate (Quality Control) Order, 2020
(S.O.1895(E) dated 16 /06/2020)
AcetoneIS 170:200432. Acetone (Quality Control) Order, 2020
(S.O.1896(E) dated 16 /06/2020)
Amendment in the Acetone (Quality Control) Order
Amendment in the Acetone (Quality Control) Order
Phosphorous Trichloride, pure and Analytical ReagentIS 4581:197833. Phosphorous Trichloride (Quality Control) Order, 2020
(S.O.1897(E) dated 16 /06/2020)
Phosphorous Pentachloride, TechnicalIS 11744:198634. Phosphorous Pentachloride, (Quality Control) Order, 2020
(S.O.1898(E) dated 16 /06/2020)
Phosphorous Oxychloride, TechnicalIS 11657:198635. Phosphorous Oxychloride, (Quality Control) Order, 2020
(S.O.1899(E) dated 16 /06/2020)
Stabilized Hydrogen PeroxideIS 2080:198036. Hydrogen Peroxide, (Quality Control) Order, 2020
(S.O.1900(E) dated 16 /06/2020)
Precipitated Barium Carbonate, TechnicalIS 3205:198437. Precipitated Barium Carbonate, (Quality Control) Order, 2020
(S.O.1901(E) dated 16 /06/2020)
Precipitated Barium for Ceramic and Glass IndustryIS 12928:1990Precipitated Barium Carbonate, (Quality Control) Order, 2020
(S.O.1901(E) dated 16 /06/2020)
Sodium Formaldehyde SulphoxylateIS 4505:201538. Sodium Formaldehyde Sulphoxylate, (Quality Control) Order, 2020
(S.O.1902(E) dated 16 /06/2020)
Sodium Tripolyphosphate, Anhydrous, TechnicalIS 6100:198439. Sodium Tripolyphosphate, (Quality Control) Order, 2020
(S.O.1903(E) dated 16 /06/2020)
n- Butyl AcrylateIS 14709:199940. n-Butyl Acrylate (Quality Control) Order, 2020
(S.O. 2182(E) dated 29/06/2020)
EtherIS 336:197341. Ether (Quality Control) Order, 2020
(S.O. 2183(E) dated 29/06/2020)
Ethylene GlycolIS 5295:198542. Ethylene Glycol (Quality Control) Order, 2020
(S.O. 2184(E) dated 29/06/2020)
Corrigendum dated 21.07.2020
TolueneIS 537:201143. Toluene (Quality Control) Order, 2020
(S.O. 2186(E) dated 29/06/2020)
Terephthalic AcidIS 15030:200144. Terephthalic Acid (Quality Control) Order, 2020
(S.O. 2185(E) dated 29/06/2020)
Methyl AcrylateIS 14707: 199945. Methyl Acrylate, Ethyl Acrylate, n-Butyl Acrylate (Quality Control) Order, 2020
Ethyl AcrylateIS 14708:1999(S.O. No. 4001 (E) 04/11/2020)
Vinyl Acetate MonomerIS 12345:198846. Vinyl Acetate Monomer (Quality Control) Order, 2020
(S.O. No. 4003 (E) 04/11/2020)
Styrene (Vinyl Benzene)IS 4105:202047. Styrene (Vinyl Benzene) (Quality Control) Order, 2020
(S.O. No. 4002 (E) 04/11/2020)
Maleic Anhydride, TechnicalIS 5149:202048. Maleic Anhydride (Quality Control) Order, 2020
(S.O. No. 4000 (E) 04/11/2020)
AcrylonitrileIS 12540:198849. Acrylonitrile (Quality Control) Order, 2020
(S.O. No. 3999 (E) 04/11/2020)
Elektronik
Room Air Conditioners- Specification Part 1 Unitary Air ConditionersIS 1391 (Part-1): 201752. Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Order, 2019
S.O. 4354(E) dated 05th December, 2019
Room Air Conditioners- Specification Part 2 Split Air ConditionersIS 1391 (Part-2): 2018The Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2020.
(S.O. 1518(E) dated 18th May, 2020)
Ducted and Package Air ConditionersIS 8148:2018
Finned type Heat Exchanger for Room Air ConditionerIS 11329:2018
Hermetic compressorIS 10617:2018
Hermetic Compressors-Specification
Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing ControlsIS/IEC 60730 (Part 2) Section 9: 2011
Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperesIS 1293 : 200553. Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Order, 2019
S.O. 4353(E) dated 04th December, 2019
The Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Amendment Order, 2020
Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2)IS 15884:2010(S.O. 1517(E) dated 18th May, 2020 )
Domestic Pressure CookerIS 2347:201756. (Quality Control) Order, 2020
(S.O. 294 (E) dated 21/01/2020)
Domestic Pressure Cooker (Quality Control) (Amendment) Order, 2020
(S.O.2019(E) dated 23/06/2020)
Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 VIS 1554(Part 1) : 198857. Cables (Quality Control) Order, 2020
(S.O. 294 (E) dated 21/01/2020 )
Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kVIS 1554(Part 2) : 1988
Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 VIS 7098 (Part 1) : 1988
Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kVIS 7098 (Part 2) : 2011
Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kVIS 7098 (Part 3) : 1993
Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – SpecificationIS 14255 : 1995
Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kVIS 9968 (Part 2) : 2002
Specification for Thermocouple Compensating CablesIS 8784 : 1987
Welding Cables – SpecificationIS 9857 : 1990
Elastomer Insulated Flexible Cables for Use in Mines – SpecificationIS 14494 : 2019
Specification for Flexible Cables for Miner’s Cap-LampsIS 2593 : 1984
Specification for Shot Firing Cables (for use other than in shafts)IS 5950 : 1984
Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – SpecificationIS 17048 : 2018
Spielzeug
Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties.IS 9873 (Part 1) : 201860. Toys (Quality Control ) Order, 2020
(S.O. 853(E) dated 25th February 2020)
Safety of Toys Part 2 Flammability.IS 9873 (Part 2) : 2017Toys (Quality Control) Amendment Order, 2020
Toys (Quality Control) Amendment Order, 2020
Safety Requirements for Toys Part 3 Migration of Certain Elements.IS 9873 (Part 3) : 2017
Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use.IS 9873 (Part 4) : 2017
Safety of Toys Part 7 Requirements and Test Methods for Finger Paints.IS 9873 (Part 7) : 2017
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products.IS 9873 (Part 9) : 2017
Safety of Electric Toys.IS 15644: 2006
Andere
Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram FoodgrainsIS 14887:201463. The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020
Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram FoodgrainsIS 16208:2015
S.O. 1403(E) dated 23rd April, 2020
Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram SugarIS 14968:2015
Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling SandIS 14252:2015
Butterfly valves for general purposeIS 13095:199164. Butterfly valves (Quality Control) Order, 2020.
(S.O. 1920 (E) dated 17 June, 2020)
Retro-reflective DevicesIS/ISO 6742 (Part 2):201565. Bicycles- Retro Reflective Devices (Quality Control) Order, 2020 .
(S.O. 2290(E) dated 07/07/2020)
Plain Copier PaperIS 14490:201866. Plain Copier Paper (Quality Control) Order, 2020.
(S.O. 2149(E) dated 05/06/2020)
Compounded Feeds for CattleIS 2052 : 200967. FSSAI Direction vide File No. 1-95/Std/Misc/SP(LC&A)/FSSAI-2015-Pt-1c dated 27.01.2020
Corrigendum dated 30.01.2020
Extension of timeline for compliance with the direction dated 27th January, 2020
Industrial and protective rubber knee and ankle bootsIS 5557: 200469. Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020
(S.O. No. 3858 (E) 27/10/2020)
All rubber gum boots and ankle bootsIS 5557 (Part 2): 2018
Moulded solid rubber soles and heelsIS 5676: 1995
Rubber microcellular sheets for soles and heelsIS 6664: 1992
Solid PVC soles and heelsIS 6719: 1972
PVC sandalIS 6721: 1972
Rubber Hawai ChappalIS 10702: 1992
Slipper, rubberIS 11544: 1986
Polyvinyl chloride(PVC) industrial bootsIS 12254: 1993
Polyurethane sole, semirigidIS 13893: 1994
Unlined moulded rubber bootsIS 13995: 1995
Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial useIS 16645: 2018
Footwear for men and women for municipal scavenging workIS 16994: 2018
Leather safety boots and shoes for minersIS 1989 (Part 1): 198670. Footwear made from Leather and other materials (Quality Control) Order, 2020
(S.O. No. 3860(E) dated 27/10/2020)
Leather safety boots and shoes for heavy metal industriesIS 1989 (Part.2): 1986
Canvas Shoes Rubber SoleIS 3735: 1996
Canvas Boots Rubber SoleIS 3736: 1995
Safety Rubber Canvas Boots for MinersIS 3976: 2018
Leather safety footwear having direct moulded rubber soleIS 11226: 1993
Leather safety footwear with direct moulded polyvinyl chloride (PVC) soleIS 14544: 1998
Sports footwearIS 15844: 2010
High ankle tactical boots with PU – Rubber soleIS 17012: 2018
Antiriot shoesIS 17037: 2018
Derby shoesIS 17043: 2018
Personal protective equipment – Part 2 Safety FootwearIS 15298 (Part 2): 201671. Personal Protective Equipment – Footwear (Quality Control) Order, 2020
(S.O. No. 3857(E) dated 27/10/2020)
Personal protective equipment – Part 3 Protective FootwearIS 15298 ( Part 3) : 2019
Personal protective equipment – Part 4 Occupational FootwearIS 15298 (Part 4) : 2017
Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight ShankIS 4296 (Part 1):201672. Press Tool- Punches (Quality Control) Order, 2020
(S.O. No. 3994 (E) 04/11/2020)
Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced ShankIS 4296 (Part 2):2016
Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced ShankIS 4296 (Part 3):2016
Domestic Gas Stoves for use with Liquefied Petroleum GasesIS 4246: 200254. Domestic Gas Stoves for use with Liquefied Petroleum Gases (Quality Control) Order, 2019
S.O. 4345(E) dated 03th December, 2019
Transparent Float GlassIS 14900: 201855. Transparent Float Glass (Quality Control) Order, 2019
(S.O. 03 (E) dated 31/12/2019
Transparent Float Glass (Quality Control) (Amendment) Order, 2020
(S.O.2016(E) dated 23/06/2020)
Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial ApplicationIS 9573(Part 1):201758. Rubber Hose for Liquefied Petroleum Gas (LPG) (Quality Control ) Order, 2020
(S.O. 478(E) dated 28th January 2020)
Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application.IS 9573(Part 2):2017
Aluminium and Aluminium Alloy Bare Foil for Food PackagingIS 1539259. Aluminium Foil (Quality Control) Order, 2020
(S.O. 687 (E) dated 13/02/2020 )

To find out whether your products have now been added please contact us. Since the list is continually changing and expanding, it is often not clear whether a product now falls under the certification obligation or not.
We can support you here and give reliable information about the regulations of your product.
We will be happy to support you with the BIS certification and are available at any time to answer your questions. Write us an email or call us at +49-69-2713769261.
You can also view our free India Certification Brochure, which you can download as a PDF file here.

MPR Author

About the author: Julian Busch is founder and Managing Director of MPR International GmbH
Publisher: MPR International GmbH

Tel.: +49 69 271 37 69 261

E-Mail: info@certification-india.com
Web: www.certification-india.com