Glossary Terms Archiv - Page 2 of 5 - MPR India Certification

BIS Certification for Steel Products (Foreign Manufacturers)

Steel products such as reinforcing steel (TMT bars), steel plates, pipes or profiles are subject to BIS certification in India. Foreign manufacturers must also license their products via the Foreign Manufacturers Certification Scheme (FMCS) in accordance with Indian standards (IS codes). The legal basis is the Steel and Steel Products (Quality Control) Order, 2024 (QCO), which was issued by the Indian Ministry of Steel. Implementation and monitoring are carried out by the Bureau of Indian Standards (BIS), which in turn reports to the Ministry of Consumer Affairs, Food, and Public Distribution.

Requirements for Foreign Manufacturers

Clear technical and procedural requirements apply to BIS certification in the steel sector:

Only the manufacturer himself can obtain the license, but not dealers, exporters or importers.
Each production facility needs its own license. Separate applications must be submitted for plants at different locations.
Before submitting an application, the appropriate IS standard must be identified (e.g. IS 1786 forTMT steel, IS 2062 for structural steel).
The production process must be fully documented – from goods receipt to processing and final packaging.
If a production step is outsourced, BIS approval is also required for this.
The manufacturer must have appropriate testing facilities and qualified quality control personnel who meet the requirements of the standard and the Scheme of Inspection and Testing (SIT).
In addition, the appointment of an Authorized Indian Representative (AIR) is mandatory, who acts as the legal contact in India.

Certification Procedure under FMCS

The BIS ISI certification scheme includes an on-site factory inspection and product sample testing in India. A BIS auditor travels to the production site, evaluates manufacturing processes including quality assurance, and collects samples for laboratory analysis. The certificate with a license number is issued only after all assessments are successfully completed. Use of the ISI mark is then permitted. Regular follow-up inspections and re-certifications ensure continued compliance with the standards.

Consequences of Non-Conformities

Without valid BIS certification, affected steel products may not be imported into or sold in India . In the event of violations, there is a risk of rejections at the border, refusal of customs clearance or sanctions under the BIS Act. Since the new QCO came into force, the certification obligation also includes relevant raw materials, not just the finished product.

BIS Certification for German Companies (Foreign Manufacturers)

German manufacturers wishing to export products to India must meet the requirements of the Foreign Manufacturers Certification Scheme (FMCS) of the Bureau of Indian Standards (BIS). Certification is mandatory for numerous product groups – such as steel, machinery, electrical appliances. The BIS is subordinate to the Ministry of Consumer Affairs, Food & Public Distribution.

Requirements and Legal Context

The FMCS is managed by the Foreign Manufacturers Certification Department (FMCD) at BIS headquarters in New Delhi.
German companies can only obtain a license as a manufacturer. Dealers, importers or distributors are not entitled to license.
Each production facility – also international – requires a separate registration and license.
For each product, the appropriate Indian Standard (IS code) must be identified, e.g. IS 1786, IS 2062, etc.
The production process must be clearly documented – from the receipt of the raw material to the packaging. Outsourcing requires explicit approval via SIT (Scheme of Inspection & Testing).
The manufacturer’s own test facilities and qualified quality control personnel are necessary.
An Authorized Indian Representative (AIR) resident in India must be appointed – he or she will be responsible for communication and representation vis-à-vis the BIS.

Certification Process (FMCS / Scheme I)

Prepare technical documents with product description, process diagram and IS specifications
Submit the application in printed form to the authority on site (Form-I) including technical documents, test reports, operation diagram
Factory inspection by BIS auditors on site: quality assurance & management, production processes, test results are checked
Sample selection and collection: Samples are then tested in a BIS-recognized laboratory
After successful verification: License with ISI standard mark & license number (starts with “CM/L-“) is issued
Ongoing monitoring: regular inspections, market samples and, if necessary, re-tests; License valid for 1 year, extension possible, but usually no new audit is required.

Machinery and Technical Equipment (Scheme X)

For machinery and technical equipment from with customs tariff classes (HS codes starting with 84/85), the certification obligation according to Scheme X has been in effect since August 2026, also for German manufacturing companies. Under Scheme X, extended requirements apply to product data, technical files (compliance reports), type-approved or CoC certificates – often closely based on European ISO and C standards (e.g. IS 16819)

Consequences of Non-Conformity

Without a valid BIS license, import into India is not permitted. Products can be rejected at the border, confiscated or subject to heavy fines. In addition, there is a risk of criminal consequences in certain areas (e.g. medical devices, industrial plants).

BIS Scheme X – Certification Requirement for Industrial Machinery in India

BIS Scheme X is a certification scheme introduced by the Bureau of Indian Standards (BIS), requiring mandatory BIS certification for various industrial machinery and equipment intended for sale or import into India. Affected categories include pumps, compressors, packaging machines, and electrical systems.

Originally scheduled for August 2025, the deadline has now been officially extended to September 2026. This postponement provides manufacturers with more time to prepare, as many regulatory details remain unclear, including applicable technical standards and testing procedures. These uncertainties have caused delays in certification planning and application submissions.

Manufacturers already targeting the Indian market are particularly affected, as long processing times and a likely expansion of regulated product categories add further complexity. In response, the Indian government announced a comprehensive amendment in June 2025 to address open issues.

Recommendation: Despite the deadline extension, manufacturers are advised to begin the certification process early to avoid import restrictions or economic losses.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

Department of Telecommunications (DoT)

The Department of Telecommunications, abbreviated DoT, is a department of the Ministry of Communications, Government of India.

The telecom services are globally recognized as an important tool for the socio-economic development of a nation, and hence the telecom infrastructure is considered to be a crucial factor in achieving the socio-economic goals in India. Accordingly, the Ministry of Telecommunications has formulated a development policy for the accelerated growth of telecommunications services. The ministry is also responsible for issuing licenses for various telecommunications services such as Unified Access Service, Internet and VSAT service. The department is also responsible for spectrum management in the field of radio communications in close coordination with international bodies. It also enforces the regulatory measures for mobile communications by monitoring the wireless transmission of all users in the country.

The Commission for Digital Communications (formerly Telecommunications Commission)

The Telecommunications Commission was established by the Government of India by the resolution of 11 April 1989 with administrative and financial powers of the Government of India to deal with various aspects of telecommunications. In a resolution of 22 October 2018, the government renamed the “Telecom Commission” to the “Digital Communications Commission”.

The Commission for Digital Communications is responsible for:

Formulation of the policy of the Ministry of Telecommunications for approval by the government
Preparation of the budget for the Telecommunications Division for each financial year and its approval by the Government
Implementation of the government’s policy in all matters relating to telecommunications

Central Drugs Standard Control Organization (CDSCO)

The Central Drugs Standard Control Organization (CDSCO) is responsible for regulating pharmaceuticals and medical devices in India to ensure their safety, efficacy and quality. It is also responsible for the CDSCO certification of medical devices.

Reporting to the Ministry of Health and Family Welfare, the CDSCO plays a crucial role in regulating and controlling the manufacture, sale and distribution of medicines and medical devices in India.

Together with state regulators, the CDSCO is responsible for issuing licenses for certain specialized categories of critical drugs, such as blood and blood products, intravenous fluids, vaccines, and serums.

The CDSCO’s main tasks include:

Drug approvals and licensing: The CDSCO reviews applications for approval of new drugs, vaccines and biological products (CDSCO registration). It issues licenses to pharmaceutical manufacturers and ensures that regulatory standards are met.

Supervision of clinical trials: The organization oversees and regulates clinical trials conducted in India to ensure ethical practices and the safety of participants.

Drug standards and quality control: The CDSCO establishes and adheres to standards for drugs, including specifications for active pharmaceutical ingredients (APIs) and finished dosage forms. It conducts quality control inspections to verify compliance with these standards.

Medical Device Regulation: CDSCO deals with the regulation of medical devices, including their import, manufacture, and sale. It establishes guidelines for safety and performance standards for medical devices.

Pharmacovigilance: The organization monitors and evaluates the safety of drugs on the market and collects and analyzes information on adverse drug reactions (ADRs) to ensure timely intervention when safety concerns arise.

Export and Import Control: CDSCO regulates the export and import of pharmaceuticals and medical devices and ensures that these products meet the required quality and safety standards.

Licensing of blood banks and serum: The CDSCO is responsible for the approval and regulation of blood banks and sera to ensure the safety of blood and blood products.

Regulatory Compliance: The CDSCO ensures compliance with the Medicines and Cosmetics Act and the regulations that govern the manufacture, sale, and distribution of pharmaceuticals and cosmetics in India.

Overall, the CDSCO plays an important role in protecting public health by regulating the pharmaceutical and medical device industries to ensure the availability of safe, effective, and high-quality healthcare products in the country.

You can find more information on the CDSCO registration website.

Ministry of Communications and Information Technology (MEITY)

The Ministry of Electronics and Information Technology is part of the Union Government of the Republic of India. It was established on July 19, 2016 from the Ministry of Communications and Information Technology.

The Ministry of Electronics and Information Technology (MeitY), an agency of the Government of India, provides guidelines for all government organizations in the public sector. The guidelines are also often adopted by private sector organizations in regulated industries such as financial services and telecommunications.

The main functions and responsibilities of the MeitY include:

Information Technology (IT) Policy: Formulate policies and strategies to promote the growth of the IT industry in India, support e-governance initiatives, and promote the use of information technology in various sectors.

Electronics and Hardware: Promoting the development and growth of the electronics and hardware industry in the country.

Digital India Initiative: Implementation of the Digital India program, which aims to transform India into a digital society and knowledge economy. This includes initiatives in the areas of digital infrastructure, digital education and digital services.

Cybersecurity: Addressing cybersecurity issues and ensuring the security of digital systems and networks.

E-governance: Promote and implement e-governance initiatives to improve government services, transparency and efficiency.

Research and development: promotion of research and development in the fields of electronics, information technology and telecommunications.

International cooperation: Cooperation with international organizations and other countries to promote cooperation in the fields of IT and electronics.

Standardization and Quality: Setting standards for the electronics and IT industries to ensure the quality of products.

Paper Import Monitoring System (PIMS)

The Paper Import Monitoring System (PIMS) was launched by the Directorate General of Foreign Trade (DGFT) in India in October 2022. The system comprises a digital platform introduced by the Government of India to improve transparency and efficiency in the import of paper products.

The PIMS applies to the import of a wide range of paper products covering 201 tariff lines, such as newsprint, handmade paper, coated paper, uncoated paper, litho and offset paper, sanitary paper, toilet paper, cartons, labels, etc.

However, paper products such as currency paper, bank bonds, check paper, security printing paper have been exempted from registration.

PIMS serves as a central database where importers must register and provide key information about their paper shipments prior to arrival at the port of entry. The system allows for real-time monitoring, verification of import data, and prevention of unauthorized imports.

By monitoring and verifying import data, PIMS is designed to promote transparency and reduce the risk of misreporting or fraudulent activity. This ensures fair trade practices and promotes a level playing field for all stakeholders in the paper industry.

The government has introduced PIMS as a digital platform that importers can access at any time. Compliance with the system is mandatory for all paper importers to ensure transparency, data accuracy and adherence to fair trade practices.

Importers who fail to pre-register their information/data on reported items or are found to be entering inaccurate data into the PIMS online module will face penalties, including action under the Foreign Trade Act.

We would be happy to assist you in registering in PIMS. Feel free to contact us.

BIS Standards

Here is a list of the current standards for BIS mandatory products.

For more information regarding the BIS certification, please read our free information booklet “BIS Certification – The Booklet“.

Certification Scheme I (ISI Mark Scheme)

Sr No.	IS No.	Product
Cement (any variety of cement manufactured or sold in India) such as
1.	IS 12330	Sulphate Resisting Portland Cement
2.	IS 12600	Low heat Portland Cement
3.	IS 1489 (Part 1)	Portland Pozzolana Cement-Part1 Fly-ash based
4.	IS 1489 (Part 2)	Portland Pozzolana Cement-Part 2 Calcined clay based
5.	IS 269	Ordinary Portland Cement
6.	IS 3466	Masonry Cement
7.	IS 455	Portland Slag Cement
8.	IS 6452	High Alumina Cement for Structural use
9.	IS 6909	Super sulphated cement
10.	IS 8041	Rapid hardening Portland cement
11.	IS 8042	White Portland Cement
12.	IS 8043	Hydrophobic Portland Cement
13.	IS 8229	Oil well Cement
14.	IS 16415: 2015	Composite Cement- Specification.
15.	IS 16993: 2018	Microfine Ordinary Portland Cement- Specification.
16.	IS 15895: 2018	High Alumina Refractory Cement.
Household Electrical goods
17.	IS 12640 (Part 1)	Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
18.	IS 12640 (Part 2)	Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs)
19.	IS 13010	AC watt-hour meters, class 0.5, 1 & 2
20.	IS 13779	AC static watt-hour meters, class 1 & 2
21.	IS 14697	AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S
22.	IS 15111 (Part 1 & 2)	Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements
23.	IS 302 (Part 2/Sec 3)	Safety of household and similar electrical appliances – Electric iron
24.	IS 302 (Part 2/Sec 201)	Safety of household and similar electrical appliances– Electric immersion water-heaters
25.	IS 302 (Part 2/Sec 202)	Safety of household and similar electrical appliances –Electric stoves
26.	IS 302 (Part 2/Sec 30)	Safety of household and similar electrical appliances-Room heaters
27.	IS 3854	Switches for domestic and similar purposes
28.	IS 418	Tungsten filament general service electric lamps (upto100 W )
29.	IS 694	PVC insulated cables for working voltages up to and including 1100V
30.	IS 8828 *	Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations
31.	IS 9968 (Part 1)	Elastomer insulated cables (Part.1): For working voltages up to and including1100 V
* Since revised as IS/IEC 60898
Batteries
32.	IS 8144	Multi-Purpose dry batteries
Food & Related Products De-notified from compulsory BIS certification
	IS 15757	Follow–up formula –complimentary foods De-notified from compulsory BIS certification
	IS 11536	Processed cereal based complementary foods De-notified from compulsory BIS certification
	IS 1165	Milk-powder De-notified from compulsory BIS certification
	IS 1166	Condensed milk, partly skimmed and skimmed condensed milk De-notified from compulsory BIS certification
	IS 12176	Sweetened ultra high temperature treated condensed milk De-notified from compulsory BIS certification
	IS 13334 (Part 1)	Skimmed milk-powder, standard grade De-notified from compulsory BIS certification
	IS 13334 (Part 2)	Skimmed milk-powder, extra grade De-notified from compulsory BIS certification
	IS 13428	Packaged Natural Mineral Water De-notified from compulsory BIS certification
	IS 14433	Infant milk substitutes De-notified from compulsory BIS certification
	IS 17945: 2022	Food for Special Medical Purpose intended for Infants De-notified from compulsory BIS certification
	IS 14542	Partly skimmed milk powder De-notified from compulsory BIS certification
	IS 14543	Packaged Drinking Water (Other than Packaged Natural Mineral Water) De-notified from compulsory BIS certification
	IS 1656	Milk- cereal Based Complementary foods De-notified from compulsory BIS certification
Feeding Bottles
33.	IS 14625	Plastic Feeding Bottles
34.	IS 5168	Glass Feeding Bottles
Oil Pressure Stoves
35.	IS 10109	Oil pressure stove, offset burner type
36.	IS 2787	Multi-burner oil pressure stoves
37.	IS 1342	Oil pressure stoves
Automobile Accessories
38.	IS 13098	Automotive vehicles –Tubes for pneumatic tyres
39.	IS 15627	Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles
40.	IS 15633	Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply
41.	IS 15636	Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply
Cylinder, Valves and Regulator
42.	IS 14899	Liquefied petroleum gas containers for automotive use
43.	IS 15100	Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
44.	IS 3196 (Part 4)	Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
45.	IS 3196 (Part 1)	Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)
46.	IS 3196 (Part 2)	Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
47.	IS 3224	Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
48.	IS 3745	Yoke Type Valve Connection for Small Medical Gas Cylinders
49.	IS 7142	Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity
50.	IS 7285 (Part 1)	Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders
51.	IS 7285 (Part 2)	Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
52.	IS 7302	Valve fittings for gas cylinder valves for use with breathing apparatus
53.	IS 7312	Welded and seamless steel dissolved acetylene gas cylinders
54.	IS 8737	Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
55.	IS 8776	Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity
56.	IS 9798	Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
Medical Equipment
57.	IS 3055 (Part 1)	Clinical thermometers :Part1 Solid stem type
58.	IS 3055 (Part 2)	Clinical thermometers :Part 2 Enclosed scale type
59.	IS 7620 (Part 1)	Diagnostic Medical X-Ray Equipment
Steel and Iron Products
60.	IS 1785 (Part 1) : 1983	Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
61.	IS 1785 (Part 2) : 1983	Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
62.	IS 6003:2010	Indented wire for Pre-stressed concrete
63.	IS 6006:2014	Uncoated stress relieved strand for Pre-stressed concrete.
64.	IS 13620:1993	Fusion bonded epoxy coated reinforcing bars
65.	IS 14268:1995	Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.
66.	IS 277:2003	Galvanized steel sheets ( plain and corrugated).
67.	IS 2002:2009	Steel plates for pressure vessels for intermediate and high temperature service including boilers.
68.	IS 2041:2009	Steel plates for pressure vessels used at moderate and low temperature
69.	IS 2830:2012	Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
70.	IS 1786:2008	High strength deformed steel bars and wires for concrete reinforcement
71.	IS 648:2006	Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
72.	IS 3024:2015	Grain oriented electrical steel sheet & strip (CRGO)
73.	IS 15391:2003	Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.
74.	IS 2062:2011	Hot rolled medium and high tensile structural steel
75.	IS 432 : Part 1:1982	Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
76.	IS 432 : Part 2:1982	Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
77.	IS 513 (Part-1): 2016	Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
78.	IS 513(Part-2):2016	Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
79.	IS 1079: 2017	Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification.
80.	IS 1875:1992	Carbon steel billets, blooms, slabs and bars for forgings.
81.	IS 2879:1998	Mild steel for metal arc welding electrodes.
82.	IS 3502:2009	Steel Chequered Plates
83.	IS 5872:1990	Cold Rolled Steel Strips (Box Strappings).
84.	IS 5986: 2017	Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.
85.	IS 6240:2008	Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
86.	IS 7283:1992	Hot Rolled bars for production of bright bars and machined parts for engineering applications.
87.	IS 7887:1992	Mild steel wire rods for general engineering purposes.
88.	IS 10748:2004	Hot Rolled Steel Strip for Welded Tubes and Pipes.
89.	IS 11513:2017	Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
90.	IS 15647:2006	Hot rolled steel narrow width strip for welded tubes and pipes
91.	IS 7904:2017	High carbon steel wire rods- Specification
92.	IS 14246:2013	Continuously pre-painted galvanized steel sheets and coils
93.	IS 15965:2012	Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).
94.	IS 280: 2006	Mild steel wire for General Engineering purposes.
95.	IS 1835:1976	Round Steel wire for ropes
96.	IS 3975:1999	Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
97.	IS 4368:1967	Alloy Steel billets, blooms and slabs for forging for general engineering purposes.
98.	IS 4454 (Part 1) : 2001	Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.
99.	IS 4454 (Part 2): 2001	Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.
100.	IS 4824:2006	Bead Wires for Tyres
101.	IS 11169 (Part 1): 1984	Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
102.	IS 11587:1986	Structural Weather resistant steel.
103.	IS 15103: 2002	Fire resistant Steel- Specification
104.	IS 15914:2011	High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.
105.	IS 15961:2012	Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
106.	IS 15962:2012	Structural Steel for Building for Structures with improved seismic Resistance
107.	IS 6527:1995	Stainless Steel wire Rod
108.	IS 6528:1995	Stainless Steel Wires
109.	IS 6603:2001	Stainless Steel Bars and Flats
110.	IS 5522:2014	Stainless Steel sheets and strips for utensils- Specification

111.	IS 6911:2017	Stainless Steel Plate, Sheet and Strip- Specification
112.	IS 15997:2012	Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
113.	IS 1110 : 1990	Ferrosilicon – Specification
114.	IS 4409 : 1973	Specification for Ferronickel
115.	IS 1029 : 1970	Specification for Hot rolled steel strip (bailing)
116.	IS 2385 : 1977	Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
117.	IS 3039 : 1988	Specification for Structural steel for construction of hulls of ships
118.	IS 9550 2001	Bright steel bars – v Specification
119.	IS 3748 : 1990	Tool and die steels – Specification
120.	IS 5517 : 1993	Steel for hardening and tempering – Specification
121.	IS 16732: 2019	Galvanized Structural Steel – Specification
122.	IS 7494 : 1981	Specification for Steel for valves for internal combustion engines
123.	IS 12146 : 1987	Specification for Carbon manganese steel forgings for pressure vessels
124.	IS 16585 : 2016	Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
125.	IS 2831 : 2012	Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
126.	IS 1148: 2009	Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
127.	IS 1673: 1984	Specification for Mild Steel Wire, Cold Heading Quality
128.	IS 1812: 1982	Specification for Carbon Steel Wire for the Manufacture of Wood Screws
129.	IS 2507: 1975	Specification for Cold – rolled Steel Strips For Springs.
130.	IS 2255: 1977	Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).
131.	IS 3195: 1992	Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .
132.	IS 3431: 1982	Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
133.	IS 3885-Part-1: 1992	Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.
134.	IS 3885-Part- 2: 1992	Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.
135.	IS 4223: 1975	Specification for Steel Wire for Umbrella Ribs .
136.	IS 4224: 1972	Specification for Steel Wire for Staples, Pins And Clips.
137.	IS 4397: 1999	Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.
138.	IS 4398: 1994	Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
139.	IS 6902: 1973	Specification for Steel Wire for spokes.
140.	IS 6967: 1973	Specification for Steel For Electrically welded round Link Chains.
141.	IS 7226: 1974	Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.
142.	IS 7557: 1982	Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.
143.	IS 8052: 2006	Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.
144.	IS 8951: 2001	Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
145.	IS 8952: 1995	Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
146.	IS 9476: 1980	Specification for Cold rolled steel strips for carbon steel razor blades.
147.	IS 9962: 1981	Specification for Steel Wire for Needles.
148.	IS 17111: 2019 (ISO 683- 17: 2014)	Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels.
149.	IS 14331:1995	Steels for High Temperature Bolting Applications – Specification
150.	IS 12594: 1988	Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification
151.	IS 14650:1999	Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
152.	IS 4882: 1979	Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
153.	IS 2090:1983	Specification for High Tensile Steel Bars used in Pre-stressed Concrete
154.	IS 6529:1996	Stainless Steel Blooms Billets And Slabs For Forging
155.	IS 9294:1979	Cold-Rolled Stainless Steel Strips for Razor Blades
156.	IS 10631:1983	Stainless Steel for welding electrode core wire
157.	IS 10632 (Part 2):1983	Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.
158	IS 10632 (Part 3):1983	Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.
159	IS 11169 (Part 2): 1989	Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel
160	IS 5651:1987	Steels for Pneumatic Tools
161	IS 9516:1980	Heat Resisting Steels
162	IS 11952:1986	Steels For Piston Pins (Gudgeon Pins)
163	IS 12045:1987	Alloys Used in Electrical Resistance Metallic Heating Elements
164	IS 14652:1999	18 Percent Nickel Maraging Steel Bars and Rods
165	IS 1566:1982	Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
166	IS 1170: 1992	Ferrochromium – Specification
167	IS 11946:1987	Soft Magnetic Iron Strips
168	IS 11947:1987	Soft Magnetic Iron Rods, Bars Flats and Sections
169	IS 963: 1958	Chrome molybdenum steel bars and rods for aircraft purposes
170	IS 4454 (Part 4): 2001	Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
171.	IS 1993 : 2018	Cold-reduced Electrolytic Tin Plate
172.	IS 12591:2018	Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
173.	IS 412:1975	Expanded Metal Steel Sheets For General Purposes
174.	IS 2100: 1970	Steel Billets,Bars And Sections For Boilers
175.	IS 2589: 1975	Hard Drawn Steel Wire For Upholstery Springs
176.	IS 3298: 1981	Mild Steel Rivet Bars For Ship Building
177.	IS 4072: 1975	Steel For Spring Washers
178.	IS 8510 (Part II): 1977	Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
179.	IS 8510 (PartIII): 1977	Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
180.	IS 8563: 1977	Half Round Mild Steel Wire For The Manufacture of Split Pins
181.	IS 8564: 1977	Steel Wire For Nipples For Spokes
182.	IS 8565: 1977	Heald Wire
183.	IS 8566: 1977	Steel Wire For Reeds
184.	IS 8917: 1978	Plates For Galvanizing Pots
185.	IS 9442: 1980	Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
186.	IS 9485: 1980	Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
187.	IS 10794: 1984	Mild steel wire for cotter pins
188.	IS 12262:1988	Trapezoidal Steel Wire For Springs Washers
189	IS 1470: 2013	Silicomanganese – Specification
190	IS 15911:2010	Structural Steel (Ordinary Quality)
191	IS 1171: 2011	Ferromanganese – Specification
192	IS 4431: 1978	Carbon And Carbon- Manganese Free- Cutting Steels
193	IS 4432: 1988	Case Hardening Steels
194	IS 5518: 1996	Steels For Die Blocks For Drop Forging
195	IS 8748: 1978	Forged/Rolled CTC Segments
196	IS 12145: 1987	Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
197	IS 13387: 1992	Tool Steel Forgings For Metal Forming
198	IS 14698:1999	Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
199	IS/ISO 11951 : 2016	Cold – Reduced tinmill products – Blackplate
200.	IS 3930: 1994	Flame And Induction Hardening Steels
201.	IS 5478: 1969	Thermostat Metal Sheet and Strip
202	IS 13352: 1992	Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
203	IS 16644: 2018	Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
204	IS 17404 : 2020	Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips
205	IS 18316: 2023	Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel
206	IS 18384: 2023	Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems
207	IS 18385: 2023	Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications
208	IS 18513: 2023	Hot-Dip Zinc – Aluminium – Magnesium Alloy Coated Steel Sheets, Plates and Strips
209	IS 1469: 1993	Ferromolybdenum – Specification
210	IS 1466: 1985	Specification for Ferro Vanadium
211.	IS 8329 : 2000	Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
212.	IS 9523:2000	Ductile iron fittings for pressure pipes for water, gas and sewage
213.	IS 1161:2014	Steel tubes for structural purposes
214.	IS 1239 (Part 1):2014	Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes
215.	IS 4270:2001	Steel tubes used for water-wells (upto 200 mm dia)
216.	IS 9139:1979	Specification for Malleable iron shots and grits for use in foundries
Electrical Transformers
217.	IS 1180 (Part 1)	Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed
Electrical Motors
218.	IS 12615	Energy Efficient Induction Motors-Three Phase Squirrel Cage
Capacitors
219.	IS 2993	A.C. motor capacitors
220.	IS 13340	Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V
221.	IS 13585 Part 1	Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation
Chemicals, Fertilizers, Polymers & Textiles
222.	IS 252:2013	Caustic Soda -Specification
223.	IS 10116 : 2015	Boric Acid – Specification
224.	IS 15573	Poly Aluminium Chloride
225.	IS 695	Acetic Acid
226.	IS 2833	Aniline
227.	IS 517	Methanol
228.	IS 5158: 1987	Specification for Phthalic Anhydride, Technical
229.	IS 8058:2018	Pyridine
230.	IS 16113:2013	Gamma Picoline
231.	IS 16112:2013	Beta Picoline
232.	IS 12084: 2018	Morpholine
233.	IS 297:2001	Sodium Sulphide, Technical
234.	IS 7129:1992	Potassium Carbonate, Anhydrous
235.	IS 170:2004	Acetone
236.	IS 4581:1978	Phosphorous Trichloride, pure and Analytical Reagent
237.	IS 11744:1986	Phosphorous Pentachloride, Technical
238.	IS 11657:1986	Phosphorous Oxychloride, Technical
239.	IS 2080:2021	Stabilized Hydrogen Peroxide
240.	IS 3205:1984	Precipitated Barium Carbonate, Technical
241.	IS 12928:1990	Precipitated Barium for Ceramic and Glass Industry
242.	IS 4505:2015	Sodium Formaldehyde Sulphoxylate
243.	IS 6100:1984	Sodium Tripolyphosphate, Anhydrous, Technical
244.	IS 14709:1999	n- Butyl Acrylate
245.	IS 336:1973	Ether
246.	IS 5295:1985	Ethylene Glycol
247.	IS 537:2011	Toluene
248.	IS 15030:2001	Terephthalic Acid
249.	IS 14707: 1999	Methyl Acrylate
250.	IS 14708:1999	Ethyl Acrylate
251.	IS 12345:1988	Vinyl Acetate Monomer
252.	IS 4105:2020	Styrene (Vinyl Benzene)
253.	IS 5149:2020	Maleic Anhydride, Technical
254.	IS 12540:1988	Acrylonitrile
255.	IS 17265:2019	100 Percent. Polyester Spun Grey and White Yarn (PSY)
256.	IS 17261:2019	Polyester Continuous Filament Fully Drawn Yarn (FDY)
257.	IS 17264:2019	Polyester Industrial Yarn (IDY)
258.	IS 17262:2019	Polyester Partially Oriented Yarn (POY)
259.	IS 17263:2019	Polyester Staple Fibres (PSF)
260.	IS 7328:2020	Polyethylene Material for moulding and extrusion (i) Low Density Polyethylene (LDPE) (ii) Linear Low-Density Polyethylene (LLDPE) (iii) High Density Polyethylene (HDPE)
261.	IS 11356:2020	Styrene-Butadiene Rubber Latex
262.	IS 16481:2016	Synthetic Micro-Fibres for use in Cement Based Matrix
263.	IS 12795:2020	Linear Alkyl Benzene
264.	IS 13601:1993	Ethylene Vinyl Acetate (EVA) Copolymers
265.	IS 7686:2020	3(N, N-DiEthyl) Aminophenol
266.	IS 4566:2020	Methylene Chloride (Dichloromethane)
267.	IS 2012:2006	Red Phosphorus
268.	IS 17077 :2019/ISO 19062-1 : 2015	Acrylonitrile Butadiene Styrene (ABS)
269.	IS 869:2020	Ethylene Dichloride
270.	IS 17370:2020	p-Xylene
271.	IS 14434:1998	Polycarbonate
272.	IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014	Polyurethanes
273.	IS 17442:2020	Vinyl Chloride Monomer
274.	IS 17450 : 2020	1,3 Phenylenediamine
275.	IS 10931 : 1984	Lauric Acid
276.	IS 12029 : 1986	Acid Oil
277.	IS 12067: 1987	Palm Fatty Acids
278.	IS 12068 :1987	Rice Bran Fatty Acids
279.	IS 12069 : 1987	Coconut Fatty Acids
280.	IS 12124 : 1987	Rubberseed Fatty Acids
281.	IS 12361 :1988	Hydrogenated Rice Bran Fatty Acids
Kitchen Appliances
282.	IS 302 (Part 2/ Section 14)	Hand-held Blender
283.	IS 4250	Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer
Domestic Water Heaters for use with LPG
284.	IS 15558	Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls
285.	IS 1391 (Part-1): 2017	Room Air Conditioners- Specification Part 1 Unitary Air Conditioners
286.	IS 1391 (Part-2): 2018	Room Air Conditioners- Specification Part 2 Split Air Conditioners
287.	IS 8148:2018	Ducted and Package Air Conditioners
288.	IS 11329:2018	Finned type Heat Exchanger for Room Air Conditioner
289.	IS 10617:2018	Hermetic compressor Hermetic Compressors-Specification
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy
290.	IS 1293 : 2005	Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes
291.	IS 15884:2010	Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2)
Domestic Gas Stoves for use with Liquefied Petroleum Gases
292.	IS 4246: 2002	Domestic Gas Stoves for use with Liquefied Petroleum Gases
Transparent Float Glass
293.	IS 14900: 2018	Transparent Float Glass
Domestic Pressure Cooker
294.	IS 2347:2017	Domestic Pressure Cooker
Cables
295.	IS 1554(Part 1) : 1988	Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V
296.	IS 1554(Part 2) : 1988	Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV
297.	IS 7098 (Part 1) : 1988	Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V
298.	IS 7098 (Part 2) : 2011	Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV
299.	IS 7098 (Part 3) : 1993	Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV
300.	IS 14255 : 1995	Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification
301.	IS 9968 (Part 2) : 2002	Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV
302.	IS 8784 : 1987	Specification for Thermocouple Compensating Cables
303.	IS 9857 : 1990	Welding Cables – Specification
304.	IS 14494 : 2019	Elastomer Insulated Flexible Cables for Use in Mines – Specification
305.	IS 2593 : 1984	Specification for Flexible Cables for Miner’s Cap-Lamps
306.	IS 5950 : 1984	Specification for Shot Firing Cables (for use other than in shafts)
307.	IS 17048 : 2018	Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification
Rubber Hose for Liquefied Petroleum Gas (LPG)
308.	IS 9573(Part 1):2017	Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application
309.	IS 9573(Part 2):2017	Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application.
Aluminium Foil
310.	IS 15392	Aluminium and Aluminium Alloy Bare Foil for Food Packaging
Non Electric Toys
311.	IS 9873 (Part 1) : 2018	Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties.
	IS 9873 (Part 2) : 2017	Safety of Toys Part 2 Flammability.
	IS 9873 (Part 3) : 2017	Safety Requirements for Toys Part 3 Migration of Certain Elements.
	IS 9873 (Part 4) : 2017	Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use.
	IS 9873 (Part 7) : 2017	Safety of Toys Part 7 Requirements and Test Methods for Finger Paints.
	IS 9873 (Part 9) : 2017	Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products.
Electric Toys
312.	IS 15644: 2006	Safety of Electric Toys.
Flat Transparent Sheet Glass
313.	IS 2835 : 1987	Flat Transparent Sheet Glass.
Safety Glass
314.	IS 2553 (Part 1):2018	Safety Glass -Specification Part 1 Architectural, Building and General uses.
315.	IS 2553 (Part 2):2019	Safety Glass -Specification Part 2 For Road Transport .
Woven Sacks
316.	IS 14887:2014	Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains
317.	IS 16208:2015	Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains
318.	IS 14968:2015	Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar
319.	IS 14252:2015	Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand
Butterfly Valves
320.	IS 13095:1991	Butterfly valves for general purpose
Reflectors for Bicycles
321.	IS/ISO 6742-2:2015	Retro-reflective Devices
Paper
322.	IS 14490:2018	Plain Copier Paper
Cattle Feeds
323.	IS 2052 : 2009	Compounded Feeds for Cattle
Automobile Wheel Rim Component
324.	IS: 16192 (Part 1)	Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 Light Alloy Wheel Rims Method of Tests and Requirements
325.	IS: 16192 (Part 2)	Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 Sheet Metal Wheel Rims Method of Tests and Requirements
326.	IS: 16192 (Part 3)	Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 Spoke Wheel Rims Method of Tests and Requirements
327.	IS: 9436	Performance Requirements and Methods of Tests for Wheels for Passenger Cars
328.	IS: 9438	Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses
Foot Wear
329.	IS 5557: 2004	Industrial and protective rubber knee and ankle boots
330.	IS 5557 (Part 2): 2018	All rubber gum boots and ankle boots
331.	IS 5676: 1995	Moulded solid rubber soles and heels
332.	IS 6664: 1992	Rubber microcellular sheets for soles and heels
333.	IS 6719: 1972	Solid PVC soles and heels
334.	IS 6721: 1972	PVC sandal
335.	IS 10702: 1992	Rubber Hawai Chappal
336.	IS 12254: 1993	Polyvinyl chloride(PVC) industrial boots
337.	IS 13893: 1994	Polyurethane sole, semirigid
338.	IS 13995: 1995	Unlined moulded rubber boots
339.	IS 16645: 2018	Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use
340.	IS 16994: 2018	Footwear for men and women for municipal scavenging work
341.	IS 1989 (Part 1): 1986	Leather safety boots and shoes for miners
342.	IS 1989 (Part.2): 1986	Leather safety boots and shoes for heavy metal industries
343.	IS 3735: 1996	Canvas Shoes Rubber Sole
344.	IS 3736: 1995	Canvas Boots Rubber Sole
345.	IS 3976: 2018	Safety Rubber Canvas Boots for Miners
346.	IS 11226: 1993	Leather safety footwear having direct moulded rubber sole
347.	IS 14544: 1998	Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole
348.	IS 15844(Part-1): 2023	Sports Footwear for General Purpose
349.	IS 15844(Part-2): 2023	Sports Footwear for Performance Sports Footwear
350.	IS 15844(Part 3): 2024	Sports Footwear for Professional Sports Footwear
351.	IS 17012: 2018	High ankle tactical boots with PU – Rubber sole
352.	IS 17037: 2018	Antiriot shoes
353.	IS 17043 (Part-1): 2024	Shoes for Services
354.	IS 17043 (Part-2): 2024	Shoes for General Purpose
355.	IS 15298 (Part 2): 2016	Personal protective equipment – Part 2 Safety Footwear
356.	IS 15298 ( Part 3) : 2019	Personal protective equipment – Part 3 Protective Footwear
357.	IS 15298 (Part 4) : 2017	Personal protective equipment – Part 4 Occupational Footwear
Press Tool-Punches
358.	IS 4296 (Part 1):2016	Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank
359.	IS 4296 (Part 2):2016	Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank
360.	IS 4296 (Part 3):2016	Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank
Helmet for riders of Two Wheeler Motor Vehicles
361.	IS 4151: 2015	Helmet for riders of Two Wheeler Motor Vehicles
Refrigerating Appliances
362.	IS 17550 (Part 1): 2021	Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements
363.	IS 7872: 2018	Freezers
Centrifugally cast (Spun) iron pipes
364.	IS 1536: 2001	Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage
365.	IS 3989: 2009	Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories
366.	IS 15905: 2011	Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series
Flux Cored (Tubular) Electrodes
367.	IS 15769:2008	Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel
Sewing Machine
368.	IS 15449 : Part 1 : 2004	Household Zig-Zag Sewing Machine Head
Water Treatment System
369.	IS 16240 : 2023	Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes
Jute Bag
370.	IS 1943:1995	A- twill Jute Bag
371.	IS 2566:1993	B-twill Jute bags for packing foodgrains
372.	IS 12650:2018	Jute bags for packing 50 Kg foodgrains
373.	IS 15138:2010	Jute bags for packing 50 Kg sugar
374.	IS 16186:2014	Light weight jute sacking bags for packing 50 Kg foodgrains
375.	IS 16372:2015	Jute bags for packing up to 30 Kg foodgrains
Viscose Staple Fibres
376.	IS 17266:2019	Viscose Staple Fibres
Geo Textiles
377.	IS 15351 : 2015	Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining
378.	IS 15909 : 2020	Poly Vinyl Chloride (PVC) Geomembranes
379.	IS 16653 : 2017	Needle punched non-woven geobags
380.	IS 16654: 2017	Polypropylene Multifilament woven geobags
381.	IS 14715 (Part 1): 2016	Jute Geotextiles
382.	IS 14715 (Part 2): 2016	Jute Geotextiles
383.	IS 15869 : 2020	Open Weave Coir Bhoovastra
384.	IS 16391 : 2015	Geotextiles used in sub-grade separation in pavement structures
385.	IS 16393 : 2015	Geotextiles used in Subsurface Drainage Application
386.	IS 16362 : 2020	Geotextiles used in Sub-grade Stabilisation in pavement structures
387.	IS 16352 : 2020	High Density Polyethylene (HDPE) Geomembranes for lining
388.	IS 16090:2013	Geotextiles used as protection (or cushioning) materials
389.	IS 16392:2015	Geotextiles for permanent erosion control in hard armor systems
390.	IS 17371:2020	Geogrids for flexible pavements
391.	IS 17372:2020	Polymeric strip or geostrip used as soil reinforcement in retaining structures
392.	IS 17373:2020	Geogrids used in reinforced soil retaining structures
393.	IS 17374:2020	Reinforced HDPE membrane for effluents and chemical resistance lining
394.	IS 17483 (Part 1): 2020	Geocells
395.	IS 17483 (Part 2): 2020	Geocells
396.	IS 17880 :2022	Geosynthetics — Synthetic Polymer RopeGabions for Coastal and Waterways Protection — Specification
Protective Textiles
397.	IS 15741 : 2007	Curtains and Drapes
398.	IS 16890 : 2018	Protective clothing for firefighters
399.	IS 16874 : 2018	Protective gloves for firefighters
400.	IS 15748 : 2022	Protective clothing for industrial workers exposed to heat
401.	IS 15742 : 2007	Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame
402.	IS 15809 : 2017	High visibility Warning Clothes
403.	IS 16655 : 2017	Protective Clothing for use in welding and allied processes
404.	IS 16725 : 2018	Tactical 3 point sling
405.	IS 16726 : 2018	Pouch for ammunition and grenades made of disruptive pattern nylon-66
406.	IS 17051 : 2018	Bullet resistant jackets
407.	IS 17286 : 2019	Water-proof multipurpose rain poncho
Upholstered Composites used for Non-Domestic Furniture
408.	IS 15768 : 2008	Upholstered composites used for non-domestic furniture
Flame- Producing Lighters
409.	IS/ISO 9994:2018	Lighters- Safety Specifications
410.	IS/ISO 22702:2018	Utility Lighters – Safety Specifications
Potable Water Bottles
411.	IS 17803: 2022	Potable Water Bottles (Copper, Stainless Steel, Aluminum)
Welding Rods and Electrodes
412.	IS 814 : 2004	Covered electrodes for manual metal arc welding of carbon and carbon manganese steel
413.	IS 6419 : 1996	Welding rode and bare electrodes for gas shielded arc welding of structural steel
Smart Meters
414.	IS 16444 Part 1	A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2
415.	IS 16444 Part 2	A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S
Insulated Flask, Bottles and Containers for Domestic Use
416.	IS 17790 : 2022	Insulated Flask for Domestic Use
417.	IS 17526 : 2021	Domestic Stainless steel vacuum flask/bottle
418.	IS 17569: 2021	Insulated Container for Food Storage
419.	IS (Part 1) : 1989	Resin treated compressed wood laminates Resin treated compressed wood laminates (compregs) – For electrical purposes
420.	IS 3513 (Part 2) : 1989	Resin treated compressed wood laminates (compregs) – For chemical purposes
421.	IS 3513 (Part 3) : 1989	Resin treated compressed wood laminates (compregs) – For general purposes
Bolts, Nuts and Fasteners
422.	IS 1363 (Part 1) :2019	Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64)
423.	IS 1363 (Part 2) :2018	Hexagon Head Screw (Size ranges from M 5 to 64)
424.	IS 1363 (Part 3) :2018	Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64)
425.	IS 1364 (Part 1) :2018	Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64)
426.	IS 1364 (Part 2) :2018	Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64)
427.	IS 4621:1975	Indicating Bolts for use in public baths and lavatories
428.	IS 5187: 1972	Flush Bolts
429.	IS 10238:2001	Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures
430.	IS 12427 : 2001	Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts
431.	IS 3757 : 1985	High Strength Structural Bolts
432.	IS 204 (Part 2): 1992	Tower Bolts- Non-ferrous metal
433.	IS 204 (Part 1): 1991	Tower Bolts- Ferrous metals
434.	IS 15834 : 2022	Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks
435.	IS 2681 : 1993	Non-ferrous metal sliding door bolts (aldrops) for use with padlocks
436.	IS 281 : 2009	Mild steel sliding door bolts for use with padlocks
437.	IS 7534: 1985	Sliding locking bolts for use with padlocks
438.	IS 1284 : 1975	Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes
439.	IS 15833 : 2009	Stainless steel Tower Bolts
440.	IS 6623 : 2004	High Strength Structural Nuts
Cookware, Utensils and Cans for food and beverages
441.	IS 14756 : 2022	Stainless Steel Cookware
442.	IS 1660:2009	Wrought Aluminium Utensils
443.	IS 13983:1994	Stainless Steel Sinks for Domestic Purposes
444.	IS 9396 (Part 1) : 1987	Round Open Top Sanitary Cans for Foods and Drinks – Tinplate
445.	IS 14407:1996	Aluminium cans for beverages
Domestic Gas Stoves for use with PNG
446.	IS 17153:2019	Domestic Gas Stoves for use with Piped Natural Gas (PNG)
Fire Extinguishers
447.	IS 15683 : 2018	Portable Fire Extinguishers
448.	IS 16018:2012	Wheeled Fire Extinguishers
Electric Ceiling Type Fans
449.	IS 374:2019	Electric Ceiling Type Fans
Wood Based Boards
450.	IS 1659:2004	Block Boards
451.	IS 12823:2015	Prelaminated particle boards from wood and other Lignocellulosic material
452.	IS 3087:2005	Particle boards of wood and other lignocellulosic materials (medium density) for general purpose
453.	IS 12406:2021	Medium density fibre boards for general purpose
454.	IS 3097:2006	Veneered particle boards
Cast Iron Products
455.	IS 1726:1991	Cast iron man hole covers and frames
456.	IS 1729:2002	Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series
457.	IS 1879:2010	Malleable cast iron pipe fittings
458.	IS 13349:1992	Cast iron single faced thimble mounted sluice gates
459.	IS 210:2009	Grey iron castings
460.	IS 1537:1976	Vertically cast – iron pressure pipes for water, gas and sewage
Solar DC Cable and Fire Survival Cable
461.	IS 17293:2020	Electric Cable for Photovoltic Systems for rated voltage 1500V DC
462.	IS 17505(Part 1): 2021	Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC
Metals and Alloys
463.	IS 617:1994	Cast aluminium and its alloys – Ingots and castings for general engineering purposes
464.	IS 11890 : 1987	High purity primary aluminum ingot for remelting for special applications
465.	IS 6754:1972	Aluminum alloy ingots for remelting for general engineering purpose
466.	IS 2590 : 1987	Primary aluminium ingots for remelting for general engineering purpose
467.	IS 4026 : 2023	Aluminum ingots billets and wire bars (EC GRADE)
468.	IS 191:2007	Copper
469.	IS 7506:1987	Nickel Powder
Plywood and Wooden flush door shutters
470.	IS 303 : 1989	Plywood for general purposes
471.	IS 2202 (Part 1) : 1999	Wooden flush door shutters (solid core type) – Plywood face panels
472.	IS 710 : 2010	Marine plywood
473.	IS 5509 : 2021	Fire retardant plywood
474.	IS 1328 : 1996	Veneered decorative plywood
475.	IS 2191 (Part 2): 2022	Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels
476.	IS 2191 (Part 1): 2022	Wooden flush door shutters (cellular and hollow core type) – Plywood face panels
477.	IS 2202 (Part 2): 2022	Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels
478.	IS 4990 : 2011	Plywood for concrete shuttering works – Specification
479.	IS 10701 : 2012	Structural plywood – Specification
Flux Cored Solder Wire
480.	IS 1921: 2005	Flux Cored Solder Wire
Miscellaneous Steel Products
481.	IS 15155 : 2020	Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials
482.	IS 16651 : 2017	High Strength deformed stainless steel bars and wires for concrete reinforcement
483.	IS 6392 : 2020	Steel Pipe Flanges
484.	IS 6913 : 1973	Stainless steel tubes for the food and beverage industry
Aluminium and Aluminium Alloy Products
485.	IS 7092 (Part 1):1992	Aluminium alloy tubes for irrigation purposes -welded tubes
486.	IS 7092 (Part 2):1987	Aluminium alloy tube for irrigation purposes – extruded tube
487.	IS 5484:1997	EC Grade Aluminium Rod produced by Continuous Casting and Rolling
488.	IS 733:1983	Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes)
489.	IS 734:1975	Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes
490.	IS 736:1986	Wrought aluminium and aluminium alloy plate for general engineering purposes
491.	IS 737:2008	Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes
492.	IS 739:1992	Wrought aluminium and aluminium alloy wire for general engineering purposes
493.	IS 740:1977	Wrought aluminium and aluminium alloy rivet stock for general engineering purposes
494.	IS 5082:1998	Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications
495.	IS 16011:2012	Aluminium and aluminium alloy foil for pharmaceutical packaging
496.	IS 17682:2021	Aluminium composite panel
497.	IS 1285:2002	Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes
498.	IS 2067:1975	Wrought Aluminium Wire for Electrical Purposes
499.	IS 21:1992	Wrought aluminium and aluminium alloys for manufacture of utensils
500.	IS 1254:2007	Corrugated Aluminium Sheet
501.	IS 7902:2001	Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications
Precision Roller and Bush Chains, attachments and associated chain sprockets
502.	IS 2403 :2014 / ISO 606 : 2004	Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets
Self- Contained Drinking Water Coolers
503.	IS 1475 (Part 1) : 2001	Self- Contained Drinking Water Coolers – Energy Consumption and Performance
Medical Textiles
504.	IS 5405 : 2019	Sanitary napkins
505.	IS 17509 : 2021	Disposable baby diaper
506.	IS 17514 : 2021	Reusable Sanitary pad/ Sanitary Napkin/ Period Panties
507.	IS 17349 : 2020	Shoe covers
508.	IS 17354 : 2020	Dental Bib or Napkins
509.	IS 17630 : 2021	Bed sheet and Pillow Cover
Agro Textiles
510.	IS 16718 : 2021	Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications
511.	IS 16513 : 2016	Insect nets for Agriculture and Horticulture purpose
512.	IS 16202 : 2014	Woven Ground covers for Horticulture Application
513.	IS 17070 : 2019	Jute Agro textiles for Growth of Plants and Suppression of Weeds
514.	IS 15907 : 2010	High Density Polyethylene (HDPE) woven beds for vermiculture
515.	IS 16089 : 2013	Sapling bags for growth of seedling /sapling
516.	IS 16190 : 2014	High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose
517.	IS 16390 : 2015	Nylon Knitted seamless gloves for tobacco harvesters
518.	IS 16627 : 2017	High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system
519.	IS 17355 : 2020	Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications
520.	IS 17356 : 2020	Windshield nets for agriculture and horticulture purpose
521.	IS 17357 : 2020	Harvest nets for agriculture and horticulture purposes
522.	IS 17358 (Part 1) : 2020	Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh
523.	IS 17358 (Part 2) : 2020	Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns
524.	IS 17513 : 2020	Plant Support Nets for Agriculture and Horticulture Purposes
525.	IS 17728 : 2021	High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System
526.	IS 17729 : 2021	Flexible Water Storage Tank for Agriculture and Horticulture Purposes
527.	IS 17730 (Part 1) : 2021	Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets
528.	IS 17730 (Part 2) : 2021	Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets
529.	IS 17731 : 2021	Laminated Woven Orchard Protection Covers
Copper Products
530.	IS 12444:2020	Copper Wire Rods for Electrical Applications
531.	IS 613:2000	Copper Rods and Bars for Electrical Purposes
532.	IS 1897:2008	Copper strip for electrical purposes
533.	IS 4171:1983	Copper rods and bars for general engineering purposes
534.	IS 1545: 1994	Solid drawn copper and copper alloy tubes for condensers and heat exchangers
535.	IS 2501: 1995	Solid drawn copper tubes for general engineering purposes
536.	IS 14810: 2000	Copper Tubes for plumbing- Specification/p>
537.	IS 10773:1995	Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose
538.	IS 4412:1981	Copper wires for general engineering purposes
Drums and Tins
539.	IS 13997:2014	Drums, Large Open Top
540.	IS 1783 (Part 1) :2014	Drums Large, Fixed Ends – Grade A
541.	IS 1783 (Part 2) :2014	Drums, Large, Fixed Ends – Grade
542.	IS 2552:1989	Steel Drums (Galvanized and Ungalvanized)
543.	IS 3575:1993	Bitumen Drums
544.	IS 916:2000	Square Tins for Solid Products
545.	IS 10325:2000	Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery
Door Fittings
546.	IS 6343:1982	Door closers (pneumatically regulated) for light doors weighing up to 40 kg
547.	IS 14912:2001	Door closers, concealed type (hydraulically regulated)
548.	IS 3564:1995	Hydraulically Regulated Door Closers
549.	IS 6315:1992	Floor springs (hydraulically regulated) for heavy doors
550.	IS 1019:1974	Rim Latches
551.	IS 208:2020	Door Handles
552.	IS 4992:1975	Door handles for mortice lock (vertical type)
Bottled Water Dispenser
553.	IS 17681:2022	Bottled water dispensers
Helmet for Police Force, Civil Defence and Personal Protection
554.	IS 2745:1983	Non-metal helmet for firemen and civil defence personnel
555.	IS 2925:1984	Industrial safety helmets
556.	IS 9562:1980	Non- metal helmet for Police Force
Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh
557.	IS 2266 : 2019	Steel Wire Ropes for General Engineering Purposes
558.	IS 2365 : 2018	Steel Wire Suspension Ropes for Lifts, Elevators and Hoists
559.	IS 1855:2022	Stranded steel wire ropes for winding and man –riding haulages in mines
560.	IS 1856:2005	Steel Wire Rope forhaulage
561.	IS 2141:20005	Hot Dip Galvanized Stay Strand
562.	IS 4521:2001	Wire Ropes Used in Oil Wells and Oil Well Drilling
563.	IS 6590:1972	Braided Nylon Ropes for Mountaineering Purposes
564.	IS 278:2009	Galvanized Steel Barbed Wire for Fencing
565.	IS 16014:2018	Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with polymer coating)
Material Measure of length
566.	IS 1269(Part 1) : 1997	Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures
567.	IS 1269(Part 2) : 1997	Legal Metrology – Material Measure of length – Steel tape measures
Polyethylene Woven Sacks
568.	IS 9755 : 2021	Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers
569.	IS 11652 : 2017	Textiles — High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement
570.	IS 16709 : 2017	Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement
571.	IS 16703 : 2017	Textiles — High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials
572.	IS 17399 : 2020	Textiles — Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution
Safes, Safe Deposit Locker Cabinets and key locks
573.	IS 550 (Part 1) : 2014	Safes
574.	IS 5244 : 2020	Safe deposit locker cabinets
575.	IS 17566 : 2021	Key locks for security equipment
Hinges
576.	IS 12817:2020	Stainless steel butt hinges
577.	IS 1341:2018	Steel Butt Hinges
578.	IS 205:1992	Non-ferrous metal butt hinges
579.	IS 206:2010	Tee and strap hinges
580.	IS 362:1991	Parliament hinges
581.	IS 3818:1992	Continuous (Piano) hinges
582.	IS 3843:1995	Steel back flap hinges
583.	IS 453:1993	Double-acting spring hinges
584.	IS 18297:2023	Cabinet hinges
Cycle and Rickshaw Tyres and Tubes
585.	IS 2414:2005	Cycle and Rickshaw Pneumatic Tyres
586.	IS 2415 :2015	Cycle – Rubber Tubes (Moulded or Jointed)
Rubber Gaskets for Pressure Cookers
587.	IS 7466 :1994	Rubber Gaskets for Pressure Cookers
Laboratory Glassware
588.	IS 878 :2008	Laboratory glassware – Graduated measuring cylinders
589.	IS 915:2012	Laboratory glassware – One – Mark volumetric flasks
590.	IS 1381 (Part 1):2003	Laboratory glassware – Narrow-necked boiling flasks
591.	IS 1117:2018	Laboratory glassware – Single volume pipettes
592.	IS 2619:2018	Glass beakers
Electrical Accessories
593.	IS 14772: 2020	Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations
594.	IS 14927 (Part 2): 2001	Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling
595.	IS 1258: 2005	Bayonet Lamp Holders
596.	IS 15787: 2008	Switch-socket-outlets (non-interlock type)
597.	IS 13774:2021	Live Working Gloves of Insulating Material
598.	IS 15652:2006	Insulating Mats for Electrical Purposes
599.	IS 7809 (Part3/ Sec1): 1986	Specification for Pressure sensitive adhesive insulating tapes for electrical purposes- Part 3 requirements or individual materials – Sec 1 plasticized polyvinylchloride tapes with non- Thermosetting adhesive
600.	IS 16012: 2012	Poly- Laminated aluminium cable wrap
Poly Vinyl Chloride (PVC) Homopolymers
601.	IS 17658:2021	Poly Vinyl Chloride (PVC) Homopolymers
Polypropylene (PP) Materials for Moulding and Extrusion
602.	IS 10951: 2020	Polypropylene (PP) Materials for Moulding and Extrusion
Diesel Engines – NOx Reduction Agent AUS 32
603.	IS 17042 (Part-1): 2018	Diesel Engines – NOx Reduction Agent AUS 32
Air Cooler and Air Filters
604.	IS 3315:2019	Evaporative Air Coolers (Desert Coolers)
605.	IS 17570 (Part 1): 2021 ISO 16890-2: 2016	Air Filters for general ventilation – Technical specifications requirements and classification system based upon particulate matter efficiency (ePM)
Electrical Appliances
606.	IS 302 (Part 2/Sec 9): 2009	Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances
607.	IS 302 (Part 2/Sec 31): 2009	Safety of household and similar electrical appliances – particular requirements – range hoods
608.	IS 302 (Part 2/Sec 23): 2009	Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care
609.	IS 302 (Part 2/ Sec 80): 2017	Household and similar electrical appliances – Safety – particular requirements for fans
610.	IS 302 (Part 2/Sec 75): 2018	Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines
611.	IS 302 (Part 2/Sec 7): 2010	Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines
Asbestos or Fibre Cement based Products
612.	IS 459:1992	Corrugated and Semi – Corrugated Asbestos Cement Sheets
613.	IS 1592:2003	Asbestos Cement Pressure Pipes and Joints
614.	IS 2096:1992	Asbestos Cement Flat Sheets
615.	IS 2098:1997	Asbestos Cement Building Boards
616.	IS 6908:1991	Asbestos – Cement Pipes and Fittings for Sewerage and Drainage
617.	IS 13000:1990	Silica-Asbestos-Cement Flat Sheets
618.	IS 8870:1978	Asbestos Cement Cable Conduits and Troughs
619.	IS 9627:1980	Asbestos Cement Pressure Pipes (Light Duty)
620.	IS 13008:1990	Shallow Corrugated Asbestos Cement Sheets
621.	IS 14862:2000	Fibre Cement Flat Sheets
622.	IS 14871:2000	Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding
Water meters and accessories
623.	IS 2373:1981	Water meters (bulk type)
624.	IS 779: 1994	Water meters (domestic type)
625.	IS 2692: 1989	Ferrules for water services
Gypsum based Building Materials
626.	IS 2095 (Part 1):2011	Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards
627.	IS 17400:2021	Glass Fibre Reinforced Gypsum Panels
628.	IS 2095 (Part 2): 2022	Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards
629.	IS 2095 (Part 3):2022	Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles
Electrical Appliances for domestic water heating
630.	IS 302 (Part 2/Sec 21): 2018	Appliances for stationary storage type electric water heaters
631.	IS 302 (Part 2/Sec 35): 2017	Appliances for electric instantaneous water heaters
632.	IS 368: 2014	Electric Immersion Water Heaters
633.	IS 2082: 2018	Stationary storage type electric water heaters
634.	IS 17150: 2019	Mini domestic water heater for use with piped natural gas (PNG)s
V-Belt
635.	IS 2494 (Part 1): 1994	V-Belts – Endless V-Belts for Industrial Purposes – General Purpose
636.	IS 2494 (Part 2): 1993	V-Belts – Endless V-Belts for Industrial Purposes – fire resistant and antistatic V-Belts
637.	IS 14261: 1995	Transmission Devices – V – Belts endless narrow V-Belts for industrial use
Telescopic Ball Bearing Drawer Slide
638.	IS 17954:2023	Telescopic Ball Bearing Drawer Slide
Cross Recessed Screws
639.	IS 18471 (Part 1) : 2023/ ISO 15481:1999	Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head
640.	IS 18471 (Part 2) :2023/ ISO 15482:1999	Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head
641.	IS 18471 (Part 3) :2023/ ISO 15483:1999	Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head
642.	IS 18476 : 2023/ ISO 15480:2019	Fasteners – Hexagon Washer Head Drilling Screws with Tapping Screw Thread
643.	IS 18480 (Part 1) :2023/ ISO 7049 : 2011	Cross Recessed Tapping Screws: Part 1 Pan Head
644.	IS 18480 (Part 2) :2023/ ISO 7050 : 2011	Cross Recessed Tapping Screws Part 2 Countersunk Flat Head
645.	IS 18480 (Part 3) :2023/ ISO 7051 : 2011	Cross Recessed Tapping Screw Part 3 Raised Countersunk Oval Head
646.	IS 7483 : 2018/ ISO 7045 : 2011	Pan Head Screws With Type H or Type Z Cross Recess – Product Grade A
647.	IS 7485 (Part 1) : 2018/ ISO 7046 -1 : 2011	Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess – Product Grade A Part 1 Steel Screws of Property Class 4.8
648.	7485 (Part 2) : 2018/ISO 7046-2 : 2011	Countersunk flat head screws (common head style) with type H or Type Z Cross Recess – Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non – Ferrous Metal Screws
649.	IS 7486 : 2018/ ISO 7047 : 2011	Raised countersunk head screws (Common Head Style) with type H or type Z cross recess – Product grade A
650.	IS 18507 : 2024	Drywall Screws – Specification
651.	IS 18508 : 2024	Chipboard Screws – Specification
652.	IS 18509 : 2023	Cross-recessed Countersunk Head Wood Screws – Specification
Safety of Household, Commercial and Similar Electrical Appliances
653.	IS 302 (Part 1) : 2024 IEC 60335-1:2020	All Electrical Appliances
		Vacuum Cleaners and Water Suction Cleaning Appliances
		Spin Extractors
		Cooking Ranges, Hobs, Ovens and Similar Appliances
		Electrical Shavers Hair, Clippers and Similar Appliances
		Tumbler Dryers
		Warming Plates and Similar Appliances
		Frying Pans, Deep Fat Fryers and similar appliances
		Appliances for Heating Liquids
		Massage Appliances
		Electric Forced Convection Ovens, Steam Cookers and Steam -Convection Ovens
		Electric Heating Tools
		Electric Steam Cookers
		Insect Killers
		Electric Call Bells and Buzzers for Indoor Use
		Electric Water Boilers
		Electric Coffee Makers
		Electric Bean Slicers
		Electric Berryjuice Extractors
		Electric Can Openers
		Electric Centrifugal Juicers
		Electric Churn
		Electric Citrusfruit Squeezers
		Electric Coffee Mills not exceeding 500g hopper capacity
		Electric Cream Whippers
		Electric Egg Beaters
		Electric Food Processors
		Electric Grain Grinders not exceeding 3l hopper capacity
		Electric Graters
		Electric IceCream Machines, including those for use in refrigerators and freezers
		Electric Knife Sharpeners
		Electric Knives
		Electric Noodle Makers
		Electric Potato Peelers
		Electric Shredders
		Electric Sieving Machines
		Slicing Machines
		Electric Hot Plates
		Single Walled Baking Ovens
		Low Speed Food Grinding Machines
		Dishwashers
		Floor Treatment Machines and Wet Scrubbing Machines
		Food Waste Disposers
		Blankets, Pads, Clothing and Similar Flexible Heating Appliances
		Appliances for Skin Exposure to Optical Radiation
		Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements
		Commercial Electric Doughnut Fryers and Deep Fat Fryers
		Commercial Electric Griddles and Griddle Grills
		Commercial Electric Multi – purpose Cooking Pans
		Commercial Electric Forced Convection Ovens, Steam Cookers and Steam – Convection Ovens
		Clothes Dryers and Towel Rails
		Commercial Electric Boiling Pans
		Commercial Electric Grillers and Toasters
		Commercial Electric Appliances for keeping Food and Crockery Warm
		Commercial Electric BainsMarie
		Oral Hygiene Appliances
		Sauna Heating Appliances and Infrared Cabins
		Surface-Cleaning Appliances for Household use Employing Liquids or Steam
		Electrical Appliances for use with Aquariums and Garden Ponds
		Commercial Electric Dishwashing Machines
		Whirlpool Baths and Whirlpool Spas
		Thermal Storage Room Heaters
		Commercial Electric Rinsing Sinks
		Commercial Electric Kitchen Machines
Air-Cleaning Appliances
Water-Bed Heaters
Fixed Immersion Heaters
Outdoor Barbecues
Foot Warmers and Heating Mats
Amusement Machines and Personal Service Machines
Toilet Appliances
Fabric Steamers
Drives for Vertically Moving Garage Doors for Residential Use
Humidifiers
Commercial Electric Hoods
Vaporizers
Gas, Oil and Solid-Fuel Burning Appliances Having Electrical Connections
Electrolysers
Beauty Care Appliances Incorporating Lasers and Intense Light Sources
Personal-eTransporters
Skin Beauty Care Appliances
Furniture with Electrically Motorized Parts
Commercial Vacuum Packaging Appliances
Hand held electric Engraving Tools
DC supplied/ battery-operated vacuum cleaners
DC supplied/ battery-operated shavers, trimmers, clippers and similar appliances
DC supplied/ battery-operated Massage appliances
DC supplied/ battery-operated blenders, juicers
DC supplied/ battery-operated toothbrush and other oral hygiene appliances
DC supplied/ battery-operated foot warmer and heating mats
DC supplied/ battery-operated air purifier
Hand Tools
654.	IS 4123:1982	Chain Pipe Wrenches
655.	IS 4508:1992	Open Ended Slugging Wrenches (Spanners)
656.	IS 4509:1992	Ring Slugging Wrenches (Spanners)
657.	IS 6149:1984	Single-ended Open-jaw Adjustable Wrenches
658.	IS 2028:2004	Open-Jaw Wrenches (Spanners)
659.	IS 2029:1998	Ring Wrenches (Spanners)
660.	IS 4003 (Part 1): 1978	Pipe Wrenches –General Purpose
661.	IS 4003 (Part 2): 1986	Pipe Wrenches – Heavy Duty
662.	IS 3650:1981	Combination Side Cutting Pliers
Indutech
663.	IS 15041:2001	Textiles – Flat woven webbing slings made of man-made fibres for general services
Ropes and Cordages
664.	IS 1084:2005	Textiles — Manila Ropes — Specification
665.	IS 11066:2022	Fibre Ropes — Polyester — 3-, 4-, 8- and 12- Strand Ropes
666.	IS 14928:2001	Textiles — Composite Synthetic Fibre Ropes — Specification
667.	IS 14929: 2022	Mixed Polyolefin Fibre Ropes
668.	IS 1804:2004	Steel wire ropes – Fibre main cores – Specification
669.	IS 4572:2022	Fibre Ropes — Polyamide — 3-, 4-, 8- and 12- Strand Ropes
670.	IS 5175:2022	Fibre Ropes — Polypropylene Split Film, Monofilament And Multifilament ( PP2 ) and Polypropylene High-Tenacity Multifilament ( PP3 ) —3-, 4-, 8- and 12- Strand Ropes
671.	IS 8674 : 2013	Fibre Ropes — Polyethylene —3- And 4-Strand Ropes
672.	IS 17609 : 2021	Fibre Ropes Of Polyester / Polyolefin dual Fibres
Solar Thermal Systems, Devices and Components
673.	IS 12933 (Part 1): 2003 IS 12933 (Part 2): 2003	Solar Flat Plate Collector for Solar Water Heating Systems
674.	IS 16544: 2016	All Glass Evacuated Tubes Solar Water Heating System
675.	IS 16542: 2016	Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems
H Acid , K Acid & Vinyl Sulphone
676.	IS 8637 : 2020	H Acid
677.	IS 11557: 1986	K Acid
678.	IS 18340 : 2023	Vinyl Sulphone
Electric Fence Energizers
679.	IS 302-2-76:1999	Safety of Household and similar electrical appliances – Part 2 particular requirement Sec 76 electric fence energizers
Flashlight
680.	IS 2083:2024	Flashlight – Specification
Stainless Steel Pipes and Tubes
681.	IS 17875: 2022	Stainless Steel Seamless pipes and tubes for general service
682.	IS 17876: 2022	Stainless Steel Welded pipes and tubes for general service
Furniture
683.	IS 17631: 2022	Work chairs
684.	IS 17632: 2022	General purpose chairs and stools
685.	IS 17633: 2022	Tables and desks
686.	IS 17634: 2022	Storage units
687.	IS 17635: 2022	Beds
688.	IS 17636: 2022	Bunk beds
Non-ferrous refined metals
689.	IS 2782: 2023	Refined Nickel
690.	IS 27: 2023	Primary Lead
691.	IS 209: 2024	Refined Zinc
692.	IS 26: 2024	Tin Ingot

Certification Scheme II (Registration Scheme)

Sl. No.	IS No.	Title	Product Category
1.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Electronic Games (Video)
2.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Laptop/Notebook/Tablets
3.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Plasma/ LCD/LED Televisions of screen size 32″ & above
4.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Optical Disc Players with built in amplifiers of input power 200W and above
5.	IS 302-2-25	Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens	Microwave Ovens
6.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Visual Display Units, Video Monitors of screen size 32″ & above
7.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Printers, Plotters
8.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Scanners
9.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Wireless Keyboards
10.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Telephone Answering Machines
11.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Amplifiers with input power 2000W and above
12.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Electronic Musical Systems with input power 200W and above
13.	IS 302-2:26	Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks	Electronic Clocks with Mains Powers
14.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Set Top Box
15.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment – Safety – General Requirements	Automatic Data Processing Machine
16.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment- Safety General Requirements	Power Adaptors for IT Equipments
17.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus-Safety Requirements	Power Adaptors for Audio, Video & Similar Electronic Apparatus
18.	IS 16242 (Part 1)	General and Safety Requirements for UPS	UPS/Invertors of rating≤5kVA
19.	IS 15885 (Part 2/Sec 13)	Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED Modules	DC or AC Supplied Electronic Control gear for LED Modules
20.	IS 16046	Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications	Sealed Secondary Cells/Batteries containing Alkaline or other non-acid Electrolytes for use in portable applications
21.	IS 16102(Part 1)	Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements	Self-Ballasted LED Lamps for General Lighting Services
22.	10322 (Part 5/Sec 1)	Luminaries Part 5 Particular Requirements Sec 1 Fixed General purpose luminaries	Fixed General Purpose LED Luminaries
23.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Mobile Phones
24.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Cash Registers
25.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Point of Sale Terminals
26.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Copying Machines/Duplicators
27.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Smart Card Readers
28.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Mail Processing Machines/Postage Machines/Franking Machines
29.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Passport Reader
30.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment-Safety-General Requirements	Power Banks for use in portable applications
31.	IS 16333 (Part-3)	Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific Requirements	Mobile Phones
32.	IS 10322 (Part 5/Section 2): 2012	Luminaires Part 5: Particular Requirements Section 2 Recessed Luminaires	Recessed LED Luminaries
33.	IS 10322 (Part 5/Section 3): 2012	Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street Lighting	LED Luminaires for Road and Street lighting
34.	IS 10322 (Part 5/Section 5): 2013	Luminaires – Part 5: Particular Requirements Section 5 Flood Lights	LED Flood Lights
35.	IS 10322 (Part 5/Section 6): 2013	Luminaires – Part 5: Particular Requirements Section 6 Hamp Lamps	LED Hand lamps
36.	IS 10322 (Part 5/Section 7): 2013	Luminaires – Part 5: Particular Requirements Section 7 Lighting Chains	LED Lighting Chains
37.	IS 10322 (Part 5/Section 8): 2013	Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency Lighting	LED Luminaires for Emergency Lighting
38.	IS 16242 (Part 1):2014	General and Safety Requirements for UPS	UPS/Inverters of rating ≤ 10kVA
39.	IS/IEC 62368: Part 1: 2023	Audio, Video and Similar Electronic Apparatus – Safety Requirements	Plasma/ LCD/LED Television of screen size up-to 32”
40.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment –Safety General Requirements	Visual Display Units, Video Monitors of screen size up-to 32”
41.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment –Safety General Requirements	CCTV Cameras/CCTV Recorders
42.	IS 302 (Part 1): 2008	Safety of Household and similar electrical appliances Part 1 General requirements	Adapters for household and similar electrical appliances
43.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment –Safety General Requirements	USB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners
44.	IS/IEC 62368: Part 1: 2023	Information Technology Equipment –Safety General Requirements	Smart watches
45.	IS 16103 (Part 1): 2012	LED modules for general lighting: Part 1 safety requirements	Standalone LED Modules for General Lighting
46.	IS 10322 (Part 5)Section 9: 2017	Luminaries: Part 5 Particular Requirements Section 9 Rope Lights	Lighting Chain (Rope Lights)
47.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	Keyboard
48.	IS 302 (Part 2): Section 6: 2009	Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliances	Induction Stove
49.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	Automatic Teller Cash dispensing machines
50.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	USB Type External Hard Disk Drive
51.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Wireless Headphone and Earphone
52.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	USB Type External Solid- State Storage Devices (above 256 GB capacity)
53.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Electronic Musical System with input power below 200 Watts
54.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	Standalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max)
55.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Television other than Plasma/ LCD/LED TVs
56.	IS 302 (Part 2): Section 15: 2009	safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquids	Rice Cooker
57.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Wireless microphone
58.	IS/IEC 62368: Part 1: 2023	Information technology equipment – safety part 1 general requirements	Digital Camera
59.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Video Camera
60.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Webcam (Finished Product)
61.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements	Smart Speakers (with and without Display)
62.	IS 60669-2-1: 2008	Particular requirements for Electronic switches standards for Switches for household and similar fixed electrical installations.	Dimmers for LED products
63.	IS/IEC 62368: Part 1: 2023	Audio, video and similar electronic apparatus-safety requirements.	Bluetooth speakers
64.	IS 18112:2022	Digital Television Receiver for Satellite Broadcast Transmission – Specification	Television Sets
2. List of Solar Photovoltaics, Systems, Devices and Components under Compulsory Registration Scheme- Notified by Ministry Of New and Renewable Energy
Sl. No.	IS No.	Title	Product Category
1.	IS 14286 IS/IEC 61730 -1 IS/IEC 61730 -2	Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type Approval	Crystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based)
2.	IS 16077 IS/IEC 61730 -1 IS/IEC 61730 -2	Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval	Thin-Film Terrestrial Photovoltaic (PV) Modules (a-Si, CiGs and CdTe)
3.	IS 16221 (Part 2)	Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for Inverters	Power converters for use in photovoltaic power system
4.	IS 16169	Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic Inverters	Utility –Interconnected Photovoltaic inverters
5.	IS 16270	Secondary Cells and Batteries for Solar Photovoltaic Application General-Requirements and Methods of Test	Storage battery
3. List of chemicals notified by Ministry of Chemicals and Fertilizers.
Sl. No.	IS No.	Title	Product Category
1.	IS 798:2020	Ortho Phosphoric Acid – Specification	Ortho Phosphoric Acid
2.	IS 17439:2020	Polyphosphoric Acid – Specification	Polyphosphoric Acid
3.	IS 17412:2020	Trimethyl Phosphite – Technical Grade	Trimethyl Phosphite
4. List of Textile material notified by Ministry of Textiles
Sl. No.	IS No.	Title	Product Category
1.	IS 12171:2019	Cotton Bales- Specification	Cotton Bales

This list of BIS relevant standards is being extended regularly.

PESO Standards (English)

The following Indian regulations and standards apply to the PESO registration for India:

Explosives Act 1884:

Explosives Rules, 2008
Gas Cylinders Rules, 2004
Static & Mobile Pressure Vessels
(Unfired) Rules 1981
Ammonium Nitrate Rules, 2012.
Notification No. GSR 625 (E) dated
07.08.1983 regarding Acetylene

Petroleum Act 1934:

Petroleum Rules,2002
Calcium Carbide Rules, 1987
Cinematographic Film Rules 1948
Inflammable Substance Act 1952

TEC Standards (English)

Here is a list of the current standards for TEC mandatory products.

For more information regarding the TEC certification, please read our free information booklet “TEC Certification – The Booklet“.

Name of Product	TEC Standard
National Common Channel Signalling Plan	TEC 58146:1992
Air Raid Precaution Equipment (ARP)	TEC 58290:1993
Collapsible Steel Drums for Telecom Cables	TEC 69360:2004
Push Button Dialler	TEC 58280:1994
Videotex Services	TEC 23004:1994
Wooden Cable Drum for Telecom Cables	TEC 69370:2004
Foam-skin Polythene Insulated, fully filled, Polythene Sheathed, Underground Telecom Cables	TEC 68010:1996
15 Meter Self Supporting Mast& amendment no. 1 dated 04.10.98	TEC 45130:1996
FRP Containers for Batteries (Cap. 4000 to 10000AH)	TEC 67050:1997
Wheels and Axles for Cable Drums	TEC 69130:1997
Cable Roller Block	TEC 69140:1997
Preset wires for Jointing G.I. Wires	TEC 68020:1997
Mole skin (Wiping Cloth)	TEC 69150:1997
Discrete Wire Connectors	TEC 69160:1997
Aluminium Canister for Thermoweld Joints	TEC 69170:1998
Cleaning Tissue	TEC 69180:1998
Adhesive Polyester Tape	TEC 69190:1998
Silica Gel	TEC 69350:2004
Micro crystalline Wax	TEC 69390:2004
Emery strip	TEC 69200:1999
Adhesive Aluminium Foil	TEC 69380:2004
Water blocking powder	TEC 69400:2004
New Type of Drop Wire Accessories	TEC 68030:1999
Reinforced Thermo shrink sleeve, Closure channel &Branch- off clip (for reinforced Thermo shrink jointing kits for unpressurised Cables)	TEC 69210:1999
Portable Cable Fault Locator (With Amendment Nos.1 & 2 dated 12.02.2002 & 27.06.2002)	TEC 73010:1999
ADSL Modem (Remote Terminal) Amendment No1 Dated 04/07/2K	TEC 70010:1999
Cable Route Tracer (With Amendment No.1 dated 29.09.2000)	TEC 73020:1999
20 Pair Modular connectors and Crimping Tools & accessories	TEC 69220:1999
CD Cabinets for mounting IDC type C.T. Blocks with amendment no.1dated 30.08.05and amendment no. 2 dated 03.02.05	TEC 69010:2000
Mini Pillar cum Joint Box	TEC 69020:2000
National CCS7 Standards for MTP and ISUP	TEC 58136:2000
60 Meter Heavy Weight M/W Tower	TEC 45120:2000
Copper clad steel conductor PVC drop wire	TEC 68040:2000
FRP/Polycarbonate Pole mounted Bracket for 5/10/20 Pair External DP	TEC 69030:2000
National Q3 Interface Standards	TEC 58186:2000
Splitterless ADSL Modem	TEC 70020:2000
Splitterless ADSL COT equipment	TEC 70030:2000
Multi Line Telephone System	TEC 79100:2000
Cable Warning Tape	TEC 69230:2000
20 Meter Narrow Base Heavy Weight Tower	TEC 45040:2000
30 Meter Narrow Base Heavy Weight Tower	TEC 45060:2000
40 Meter Narrow Base Light Weight Tower	TEC 45100:2000
High Count Armoured Optical Fibre Cable (Ribbon Type For Access Network) (Amendment No. 1 dated 11.04.02 & Amendment No. 2 dated 29.06.04)	TEC 85040:2001
Technical Requirements for the International Gateway Connectivity.	TEC 51006:2001
Subscribers End Equipment (SEE) Connected To 2-W Cable Plant	TEC 79146:2001
Blue tooth enabled terminal	TEC 38026:2001
Non Zero Dispersion Shifted Single Mode Armoured Optical Fibre Cable (Amendment No. 1 dated 29.06.04)	TEC 85060:2001
Main Distribution Frame & protection Arrangement for 128/256 Ports Rural Automatic Exchanges with Amendment No.1	TEC 69040:2001
GD Tubes for Internal and External Use	TEC 66010:2001
Cadmium-Copper PVC drop wire	TEC 68050:2001
1/10/16 Pairs Screened PCM cable for Digital equipment wiring to work upto 2 M bits/sec	TEC 68060:2001
CDR Based Billing System for PSTN	TEC 58250:2001
Cable Switch Board (Screened & Unscreened)	TEC 68080:2002
Mini Line Jack Unit	TEC 79190:2002
General Packet Radio Service GPRS	TEC 22000:2002
Wireless Application protocol WAP Services	TEC 23014:2002
Tester for Gas Discharge Tube (GD Tube) & Positive Temperature Coefficient (PTC) Thermistor	TEC 73090:2002
PVC Insulated Galvanised mild Steel Wire	TEC 68070:2002
Lead Sleeves for Cable Joints	TEC 69240:2002
Plumber Metal	TEC 69250:2002
Fibre Glass Reinforced Polyester (FRP) CD cabinet Casings for mounting IDC Type Cable Terminal Blocks	TEC 69050:2002
Executive Telephone System(1+2)	TEC 79000:2002
Spacers for Ducts	TEC 69260:2002
Multi wavelength meter	TEC 88020:2002
30 Meter Narrow Base Light Weight Tower	TEC 45050:2002
Crimping Tool for Discrete Connector	TEC 69270:2003
2-Line Feature Phone	TEC 79072:2003
13 GHz, 34 /16 x 2 Mbps Microwave EquipmentDated: 15/06/2004)(Amendment No. 1	TEC 36210:2003
Video Conferencing Service	TEC 23024:2003
Digital Cross-talk and attenuation tester	TEC 73030:2003
PSTN Call Generator	TEC 58230:2003
100 mA Anti Surge fuse	TEC 69280:2003
Key Telephone Systems	TEC 79062:2003
Extension Line Jack Unit (ELJU)	TEC 79202:2003
16 KHz Metering Pulse Analyzer	TEC 79240:2003
Voice Mail System (VMS)	TEC 58260:2003
Electronic Mail Service	TEC 23034:2003
Standalone Synchronous Equipment	TEC 49000:2003
National TCAP Standards	TEC 58166:2003
Accessories of Antennas, Feeders and Wave Guides	TEC 35090:2003
House Wire PVC Twin (Tinned Copper conductor Double D Type)	TEC 68100:2003
IR for BSNL/MTNL N/W & Private Broadband Network	TEC 70042:2003
Solid Polythene Insulated, fully filled, Polythene Sheathed, Underground Telecom Cables (5 Pairs/ 0.50mm PIJF Unarmoured Underground Telecom Cables)	TEC 68090:2003
Cable Duct Lubricant	TEC 69290:2003
Alphabets on Keypad	TEC 79236:2003
Metal Free Optical Fibre Cable (Amendment No. 1 dated 30.12.03 & Amendment No. 2 dated 31.03.04)	TEC 85000:2003
Armoured Optical Fibre Cable for Direct Burial (U/G) (Amendment No. 1 dated 29.06.04)	TEC 85010:2003
Integrated Fibre Termination and Distribution System	TEC 87040:2003
Cable Duct Sealing System	TEC 69300:2003
Nationals Standards for ISDN Basic Rate Access U-Interface	TEC 58036:2003
Coupling Hearing Aids to Telephone Sets	TEC 79222:2003
Telephone Line Tester	TEC 79250:2003
Voice Band Data Modem (V.21 to V.34)	TEC 80072:2003
ISDN User-Network Interface (S/T) National Standards	TEC 58046:2003
IP BASED CENTREX SYSTEM	TEC 60040:2003
RF Fixed Coaxial Attenuators (2W & 5W)	TEC 41280:2004
RF Step Attenuator(dc to 2.5 GHz )	TEC 35100:2004
Return Loss Measurement Test Set(10 MHz-20 GHz)	TEC 44180:2004
RF Coaxial Step Attenuators (dc to 18 GHz & dc to 4 GHz	TEC 41450:2004
Optical fibre cable for Coastal Areas & High sub soil water condition	TEC 85080:2004

Aluminium Canisters for Thermoshrink joints	TEC 69310:2004
Sealant Tape-with amendment	TEC 69320:2004
Sheath Connector Assembly	TEC 69330:2004
Adhesive PVC Tape-with amendment	TEC 69340:2004
Roof Top Tower for CellularMobileSystems ( 30/25/20/15/10 M Tower )	TEC 45140:2004
ISP Traffic Legal Intercept and Monitoring System	TEC 51016:2004
100 pair Cable Terminal Block with accessories to be mounted in cabinets & pillars with Accessories	TEC 69060:2004
Location based applications and services	TEC 22010:2004
Network Switching Sub system NSS of IMPCS	TEC 22020:2004
Lawful Interception of GSM Network	TEC 22030:2004
V.90 Modem	TEC 80050:2004
Network Management System for circuit switched network	TEC 58270:2004
ISDN Handheld Tester	TEC 58050:2004
ISDN Protocol Tester	TEC 58060:2004
Microwave Power Meter(10 MHz to 18 GHz)	TEC 44090:2004
Frequency Counter (10 Hz – 18 GHz)	TEC 44100:2004
Optical Fibre Cable for Concrete surfaces	TEC 85070:2004
40 Meter Narrow Base Heavy Weight Tower	TEC 45090:2004
Managed Leased Line Network	TEC 49010:2004
Synthesized signal Generator( 2GHz-20 GHz )	TEC 44160:2004
2.7 GHz Synthesized Signal Generator (100 KHz â€“ 2.7 GHz)	TEC 44170:2004
12V DC-DC Power Supply unit with built-in 12V/7AH Battery for CDMA FWTs	TEC 66020:2004
Executive Telephone System	TEC 79010:2004
Line Jack Unit (LJU)	TEC 79170:2004
Line Jack Unit with provision of parallel extention	TEC 79180:2004
Attachments to the Telephone	TEC 79212:2004
Centralised Control and Monitoring System for Power Plants and Associated Equipment	TEC 66030:2004
60 Meter Narrow Base Light Weight Tower for Cellular Systems	TEC 45110:2004
Portable E1 – Analyser for NIB	TEC 52000:2004
15 GHz 4X2 Mbps Integrated Digital Microwave equipment	TEC 36160:2004
23 GHz 4X2 Mbps Integrated Digital Microwave Equipment	TEC 36170:2004
40,30 and 20 Meter Towers for Cellular Systems	TEC 45070:2004
18 GHz Sub STM-1 Integrated Digital Microwave Equipment	TEC 36220:2005
Unified Messaging System	TEC 58240:2005
Inverters Systems (1 To 48KVA)	TEC 66040:2005
Complete Main Distribution Frame for Automatic Exchange of 512 port & above with CT Blocks, Integrated Protection Modules, Conn Tool & other accessories, amendment no.1 dt 08.02.06	TEC 69090:2005
Thermo weld Sleeve, Closure channel, Branch-off clip & Rubber spacer (for Thermo weld jointing Kits for Unpressurised Cables)	TEC 69420:2005
V.92 Modem	TEC 80030:2005
ISDN Network Termination (NT1)	TEC 58010:2005
Multipath fade Simulator	TEC 44130:2005
6 GHz Wave Guide (Lower Band)	TEC 35200:2005
GSM RF Repeaters and Distributed Antenna System	TEC 21000:2005
Distribution Point (DP) Box for Internal & External use with Amendment No.1dated 01.05.06	TEC 69070:2005
GR for New Type DP Boxes for External use With AmendmentNo.1dated 01.05.06	TEC 69080:2005
40 meter tower for cellular system (up to170 km ph wind speed Amendment No.1Dated 9.5.2006	TEC 45080:2005
Cable & Antenna Analyser(for Base Station)	TEC 44080:2005
Micro Duct Optical Fibre Cable	TEC 851300:2005
Flexible Optical Fibre Cable (For Indoor Applications)	TEC 85110:2021
Optical Fibre Drop Cable with Installation Accessories	TEC 85120:2005
Structured LAN Cabling	TEC 52010:2005
Outdoor Drop Optical Fibre Cable (Figure 8 Type) with Installation Accessories	TEC 85100:2005
High Speed Data Circuits Tester	TEC 52020:2005
New Standard on Radio Devices in unlicensed band 2.4 GHZ	TEC 38016:2005
NSD/ISD Payphone	TEC 79030:2005
Asymmetrical Line (ADSL) Test Set	TEC 73040:2006
Copper Pair Tester for Digital Subscriber (XDSL) working	TEC 73050:2006
Base Station Antenna in 824-894 MHz, 1880-1900 MHz and 1920-2170 MHz frequency bands	TEC 35170:2006
RF Fixed Attenuator(DC- 40 GHz)	TEC 41290:2006
5.5 And 8.0 m Earth station antenna operating in Ku band	TEC 41360:2006
3.8 m Earth station antenna operating in C- band	TEC 41380:2006
Voucher Management and Roaming Recharge for Mobile Network	TEC 23000:2006
User Equipment for WCDMA 3G	TEC 20000:2006
High Count Metal free Optical Fibre Cable (Ribbon Type for Access Network)	TEC 85030:2006
Buttinski Telephone Handset	TEC 79130:2006
Intelligent Network System And Service Description	TEC 58220:2006
National SCCP Standards	TEC 58176:2006
200W and 300W Solid State Power Amplifiers ( SSPAs) (1+1) System operating in C band	TEC 41140:2006
General Packet Radio Services for GSM GERAN and UMTS	TEC 21010:2006
Short Message Service Centre SMSC	TEC 22040:2006
Tools for Installation & Operation of OFC & for Assembly of Optical Fibre Splice Closures	TEC 89060:2006
Location Based Service System LBSS	TEC 22050:2006
Web Cache System	TEC 52040:2006
Digital Cable Fault Locator for Low Insulation Faults, contact and open	TEC 73060:2006
Self-supporting PVC Drop Wire with Fibre Glass Roving as strength member	TEC 68110:2006
Jumper Wire PVC with amendment dated 8.5.2009	TEC 68120:2006
Digital Circuit Multiplication Equipment (DCME) with 5:1 and 10:1 gain	TEC 36240:2006
Feeder cable for 900 MHz, 1800 MHz and 2.1 GHz/UMTS Frequency bands ( 890-960 MHz, 1710-1880 and 1920-2170 MHz)	TEC 35080:2006
7 GHz High Performance Antenna	TEC 35130:2006
64 Kbps line drivers for use on subscriber loop on 2Wire basis	TEC 52030:2006
Base Station Panel and Omni Antennas 890-960 MHZ, 1710-1880 MHZ and 1920-2170 MHz frequency bands	TEC 35180:2006
Intermediate Data Rate (IDR) Equipment in Ku band.	TEC 41170:2006
Intermediate Data Rate Equipment (IDR) operating in C band	TEC 41180:2006
Multi Channel Per Carrier Very Small Aperture Terminal (MCPC VSAT) operating in C band	TEC 41200:2006
MPLS Performance Analyser	TEC 52070:2007
MPLS Protocol Analyser	TEC 52080:2007
15 GHz, STM-1, SDH Microwave Equipment	TEC 36180:2007
18 GHz STM-1 Integrated Digital Microwave Equipment	TEC 36230:2007
6 GHz High Performance Antenna	TEC 35110:2007
6 GHz WAVEGUIDE	TEC 35190:2007
Optical Dispersion Analyzer	TEC 88030:2007
Voice Quality Analyser	TEC 52060:2007
Completion of Calls to Busy Subscriber(CCBS)	TEC 58094:2007
11m Earth station antennas operating in C- band	TEC 41320:2007
7 m Earth station antennas operating in C- band	TEC 41330:2007
1.2 And 1.8 m Earth station antenna operating in Ku band	TEC 41370:2007
Radio Network Planning Tool for GSM and WCDMA	TEC 23010:2007
BTS and Node B Tester for GSM GPRS EDGE and WCDMA Networks	TEC 23020:2007
Fibre Distribution Management System for OFC (Type I, TypeII, TypeIII) with Amendment No. 1 dated 02.05.12	TEC 87010:2007
Thin Client	TEC 52050:2007
Large Size Digital Local cum Tandem Exchange (VOL.I & VOL II)	TEC 58210:2007

11 GHz High Performance Antenna	TEC 35140:2007
13 GHz High Performance Antenna	TEC 35150:2007
Spectrum Analyser (50 MHz – 40 GHz)	TEC 44110:2007
Wireless Application Protocol WAP Network	TEC 22060:2007
Intelligent Network Application Protocol (INAP) National Standards	TEC 58156:2007
2 Mbps Digital Echo Canceller	TEC 41210:2007
2 Mbps Digital Echo Canceller	TEC 44140:2007
Synthesized Signal Generator(1GHz-40GHz)	TEC 44150:2007
1.8m and 2.4m Earth station antennas operating in C- band	TEC 41350:2007
Intelligent Network System and Service description for GSM and WCDMA Networks	TEC 22070:2007
Metal free Optical Fibre Cable (G.652 D Fibre) (Amendment No. 1 dated 28.8.08)	TEC 85140:2007
Cable Pulling eye and cup container	TEC 69430:2007
IPLC Traffic Lawful Interception and Monitoring System	TEC 49020:2007
55Â° K Low Noise Amplifier Subsystem operating in C- band and Ext-C-band	TEC 41160:2007
Over The Air Platform For GSM WCDMA Networks	TEC 22080:2007
Optical Spectrum Analyser	TEC 88080:2007
Ethernet Traffic Analyzer for Ethernet Transport Service Testing – Table-top model	TEC 88210:2007
13 GHz Wave Guide	TEC 41090:2007
11 GHz Wave Guide	TEC 41100:2007
10W/20W Solid State Power Amplifier (SSPA) (1+1) System in C- band	TEC 41110:2007
Spectrum Analyser (1 MHz – 21 GHz)	TEC 44120:2007
18 GHz, 16 x 2 Mb/s Integrated Digital Microwave Equipment	TEC 36130:2008
Digital Satellite Phone System (DSPS) in Ku band	TEC 41270:2008
1 W to 20 W Ku- BAND SATELLITE RF TRANSCEIVERS (RFTs)	TEC 41410:2008
Prepaid Scratch Cards	TEC 23030:2008
Service Description for Analogue Subscribers	TEC 58104:2008
Long Distance Satellite Telephone (LDST) operating in C band	TEC 41190:2008
3.8 m Earth station antenna operating in Ku band	TEC 41340:2008
1m Earth station antenna operating in Ku band	TEC 41390:2008
1.2 m VSAT antenna operating in C band	TEC 41400:2008
Transient Safety Device (8 Pair Protector Module for use on back side of Mother Board of C-Dot Exchange)	TEC 69440:2008
64 Kb/s Cross Connect with 2048 Kb/s access Port	TEC 86100:2008
National Standards for H.248	TEC 59146:2008
STM-1 Satellite Modem for Ku band	TEC 41260:2008
Optical-Electrical-Optical (O-E-O) based Digital Cross-Connect (DXC) Equipment with Automatic Switched Optical Network (ASON) Capability	TEC 86120:2008
10G Ethernet Traffic Analyzer for Ethernet Transport Service Testing	TEC 88220:2008
National Standards for SIP	TEC 59156:2008
SDH, Integrated Microwave Equipment in 13 GHz band	TEC 36150:2008
Non–Zero Dispersion Optical Fibre Cable for Wideband Optical Transport (G.656 Fibre)	TEC 851500:2008
SDH, STM-1 Microwave equipment in 6GHz and 11GHz frequency bands	TEC 36140:2008
Network Protocol Analyzer	TEC 61030:2020
Multi frequency Register Signalling(R2MF)	TEC 58192:2009
CCS7	TEC 58132:2009
Services for NGN Subscribers	TEC 59164:2009
Intermediate Frequency Combiner / Divider	TEC 41230:2009
400W/700W High Power Amplifiers (1+) operating in C and Ext C band.	TEC 41250:2009
Uplink Interfacility Waveguide for C, Ext-C & Ku band	TEC 41460:2009
50 W/100 W C- BAND SATELLITE RF TRANSCEIVERS (RFTs)	TEC 41430:2009
Optical Fibre Cable for FTTH application (G.657 A Fibre)	TEC 85160:2021
STM 1/4/16/64 and Standalone STM-64 SDH Analyzer without Jitter and Wander	TEC 88260:2009
STM 1/4/16/64 and Standalone STM-64 SDH Analyzer with Jitter and Wander	TEC 88270:2009
Wavelength Division Multiplexing (WDM) Analyser	TEC 88280:2009
Feeder Cable for C, Ext C Ku band Inter facility Downlink Feeder Cable	TEC 41470:2009
2 Mb/s PCM Multiplexing Equipment	TEC 86010:2009
SDH-based Digital Cross Connect system with 40G, 60G & 80G capacities	TEC 86110:2009
Audio Streaming Platform	TEC 51000:2009
Internet Exchange Point (IXP)	TEC 51010:2009
Video Gateway System	TEC 51020:2009
Video Streaming Platform	TEC 51030:2009
SAR Measurement System	TEC 13010:2009
20 W/50W/100W/250W Solid State Power Amplifier (SSPA) 1+1 System operating in ku band	TEC 41130:2009
RF Power Combiner/Divider in C and Ku bands	TEC 41240:2009
LOW NOISE BLOCK CONVERTER IN C BAND	TEC 41300:2009
1m/1.2m/1.8m/2.4m VSAT antenna operating in Ku band	TEC 41310:2009
Drive Test Tool for GSM GPRS EDGE and WCDMA Networks	TEC 23040:2009
Post Processing Tool for GSM GPRS EDGE and WCDMA Networks	TEC 23050:2009
Narrowband Remote Access Servers	TEC 48000:2009
INTEGRATED MICROWAVE EQUIPMENT for 4/8/16 E1 in 15 GHz and 23 GHz Frequency bands	TEC 36200:2009
Provider Backbone Bridge/ Provider Backbone Bridge Traffic Engineering (PBB/PBB-TE) Based Carrier Ethernet Networks (CEN) for Access Network Applications.	TEC 48010:2009
Provider Backbone Bridge/ Provider Backbone Bridge Traffic Engineering (PBB/PBB-TE) Based Carrier Ethernet Networks (CEN) for Metro Aggregation Network Applications.	TEC 48020:2009
50W/100W/200W/300W Solid State Power Amplifier (SSPA) (1+1) System Operating	TEC 41120:2009
Bandwidth Saving Satellite if Modem for C Band	TEC 41220:2009
Optical Fibre Jumpers, Adapters, Hybrid Jumpers and Hybrid Adapters with Errata No. 1 dated 07.05.13	TEC 87070:2009
Mechanical Splice For Optical Fibre	TEC 89000:2009
Element Management System	TEC 61040:2009
SIP Application Server	TEC 59170:2009
30Â°K/45Â°K Low Noise Amplifier system operating in C-band	TEC 41150:2009
6 GHz Ultra High Performance Antenna	TEC 35120:2009
15 GHz High Performance Antenna	TEC 35160:2009
65° K/ 100° K LOW-NOISE AMPLIFIER SYSTEM OPERATING IN Ku-BAND	TEC 41440:2009
Small Size GSM Radio Sub System	TEC 21020:2009
Universal Subscriber Identity Module USIM	TEC 20010:2010
Internet Data Centre	TEC 51040:2010
Video Surveillance Platform	TEC 51050:2010
Video Ring back Tone	TEC 52090:2010
Fraud Management and Control Centre	TEC 58110:2010
IP Multi Media System Based on TISPAN Architecture	TEC 59170:2010
National Standard for V5.2 Interface	TEC 58206:2010
GR ON IP OVER SATELLITE NETWORK	TEC 41010:2010
Digital Circuit Multiplication Equipment (DCME) with20:1 gain	TEC 41080:2010
RF Power Meter (50 MHz to 40 GHz)	TEC 44010:2010
Frequency Counter (10 Hz – 40 GHz)	TEC 44020:2010
Spectrum Analyzer (1 MHz to 3.0 GHz)	TEC 44040:2010
Standard for Environmental testing of Telecommunication equipment	TEC 14016:2010
40/80 Channel Dense Wavelength Division Multiplexing (DWDM) Equipment with Channel Bit-rates upto 40Gbps for Core Network Applications	TEC 86060:2010
Optical Fibre Termination & Distribution Box (for FTTH applications)	TEC 87030:2010
Splice Closure for Optical Fibre Cables	TEC 87080:2010
Optical Time Domain Reflectometer (Type II) (1550 nm & 1625 nm wavelength) for Long Haul Applications	TEC 88140:2010
PON OTDR (Type-A) for FTTH Applications	TEC 88170:2010
PON OTDR (Type-B) for FTTH Applications	TEC 88180:2010

PON Power Meter (For FTTH applications)	TEC 88190:2010
Next Generation SDH Transport Network Tester @ STM 1, STM 1/ 4, STM 1/4/16 at 1310 & 150 NM & STM 64 rates at 1550 NM Wave Lengths	TEC 88250:2010
Fibre Distribution Frames	TEC 87000:2010
Termination Box for Optical Fibre Cables (Metal Free & Armoured)	TEC 87020:2010
Thermo shrink sleeve, Closure channel & Branch- off clip (for ThermoShrink Jointing Kits for Unpressurised cables)-with amendment No.1 dated 21.11.2011	TEC 69450:2010
Cable Cleaning Liquid	TEC 69460:2010
Splice filling compound	TEC 69470:2010
STM 1 Synchronous Multiplexer	TEC 86020:2011
STM 4 Synchronous Multiplexer	TEC 86030:2011
STM 16 Synchronous Multiplexer	TEC 86040:2011
STM 64 Synchronous Multiplexer	TEC 86050:2011
Optical Fibre Splice Protection Sleeves	TEC 89020:2011
Optical Fibre Splice Protection Sleeves for Optical Fibre Ribbon	TEC 89030:2011
Value Regulated Lead Acid (VRLA) Batteries with amendment dated 24.7.2012	TEC 67010:2011
Tower Mounted Amplifier	TEC 35010:2010
Portable VSAT Terminal	TEC 41070:2011
7 GHz SDH STM-1 Microwave Equipment	TEC 36040:2011
7 GHz Wave Guide	TEC 35030:2011
Armoured Optical Fibre Cable for Duct Application (Type-I and Type-II) with errata dated 06.07.2020	TEC 85170:2011
Optical Router	TEC 48030:2011
Electronic Commerce	TEC 51060:2011
Standard for IPv6 Conformance and interoperability	TEC 51026:2011
Tubular Valve Regulated Lead Acid (TVRLA) Batteries based on GEL Technology with amendment dated 24.7.2012	TEC 67020:2011
Cable, House wiring PVC (Tinned copper conductor insulated, taped &PVC Sheathed)	TEC 68130:2011
Fibre to the Antenna	TEC 35020:2011
Broadband Wireless Access System	TEC 36120:2011
18 GHz High Performance Antenna	TEC 35040:2011
800 and 1900 MHz Patch Panel Antenna	TEC 35060:2011
WCDMA Repeaters	TEC 21030:2011
Lawful Interception System of Mobile GSM CDMA UMTS EPS Networks	TEC 22090:2011
Long Term Evolution LTE and Evolved Packet Core EPC	TEC 22100:2011
3G Data Card	TEC 20020:2011
Universal Mobile Telecommunication System Terrestrial Radio Access Network UTRAN Rel 7	TEC 21040:2011
OPGW Cable (for laying on Power lines)	TEC 85180:2011
Flexible Versatile Multiplexer Equipment for Access Network Applications	TEC 86000:2011
Wireless Local Area Network	TEC 38040:2011
BTS Shelter	TEC 35070:2011
CLIP Phone	TEC 79092:2011
Fibre Distribution Management System (Outdoor) for Optical Fibre Cables (Ribbon & Non-Ribbon)	TEC 87050:2012
Synchronous Supply Unit	TEC 89080:2012
Broad Band Remote Access Server	TEC 48040:2012
Metropolitan Area Network (MAN)	TEC 49030:2012
ADSL Based Broadband Network	TEC 49040:2012
BGP/MPLS Virtual Private Network	TEC 49050:2012
Broadband Access on Cable TV Architecture	TEC 49060:2012
Precision Time Protocol (PTP) Slave Clock	TEC 49070:2012
ISP (Internet Service Provider) Applications	TEC 51070:2012
Hybrid Microwave Radio Equipment(15, 18 and 23GHz)	TEC 36050:2012
Milimiter Wave (E-Band) Microwave Equipment	TEC 36060:2012
IP Multimedia Subsystem	TEC 22110:2012
Location based Information System	TEC 22120:2012
Universal Mobile Telecommunication System Core Network Release 7	TEC 22130:2012
Optical splitter for PON technology	TEC 72010:2021
Optical Fibre Splicing Machine	TEC 88090:2012
Optical Fibre Splicing Machine for Ribbon Fibre	TEC 88100:2012
Ethernet Media Converter	TEC 89070:2012
Digital Distribution Frame	TEC 89090:2012
Interface Requirement for interchange of Digital Signals at 2, 8, 34, 45 & 140 Mb/s ports	TEC 89102:2012
Systems employing Computer Telephony Integration	TEC 52002:2012
Cordless Telephone	TEC 79162:2012
7GHz IP Microwave Radio Equipment	TEC 36070:2012
13GHz IP Microwave Radio Equipment	TEC 36080:2012
Digital Network Synchronization Equipment	TEC 49080:2012
Cloud Infrastructure	TEC 50000:2012
2048 Kbps line Drivers	TEC 52100:2012
xDSL main Distribution Frame (xDSL MDF) for DSLAM equipment with xDSL MDF splitter block and xDSL POT splitter	TEC 69100:2013
Softswitch for Local & Transit Wireline Application	TEC 59030:2013
Mobile Station handset based on GSM GPRS EGPRS	TEC 20002:2013
User Equipment Handset based on WCDMA HSPA	TEC 20012:2013
Remote Access Server (RAS)	TEC 48002:2013
Diameter signalling controller	TEC 59080:2013
Packet Microwave Radio Equipment (15, 18 & 23GHz )	TEC 36090:2013
Cordless Telephone	TEC 79150:2013
Radio Modem in ISM band	TEC 38032:2013
L-Band Intermediate Data Rate (IDR) Modem for C and Ku Band	TEC 41020:2013
Composite Optical Test instrument (OTDR, Power Meter & Light Source)	TEC 88000:2013
Optical Loss Test set Light Source and Power Meter	TEC 88010:2013
Optical Power meter (Type A & Type B)	TEC 88060:2013
23 GHz High Performance Antenna	TEC 35050:2013
IR on WiFi CPE (USB)	TEC 38022:2013
3G Data Card	TEC 20022:2013
Router for MPLS Based Transport Network	TEC 48050:2014
Optical Transport Network (OTN) Analyzer	TEC 88290:2014
Local Area Network Switch	TEC 48060:2014
Integrated Gateway Router	TEC 48070:2014
Firewall System	TEC 49090:2014
Content Delivery Network	TEC 51080:2014
Set Top Box for Content Services in IP Network	TEC 51090:2014
Routers	TEC 48012:2014
Customer Premises Equipment for MPLS Network	TEC 48022:2014
Universal Mobile Phone Charger	TEC 66050:2014
Characterization of VRLA Batteries and Guidelines for the O&M of VRLA batteries No.	TEC 67019:2014
Electronic Locator System	TEC 73070:2014
POLICY AND CHARGING RULE FUNCTION	TEC 59120:2014
Line Media Gateway	TEC 59070:2014
34Mbps BANDWIDTH SAVING SATELLITE MODEM	TEC 41030:2014
RAN OPTIMIZATION FOR SATELLITE NETWORK	TEC 41040:2014
Ethernet Electrical to Optical media Converter	TEC 48080:2014
Ethernet Electrical to Optical media Converter	TEC 48032:2014
LAN Switch	TEC 48042:2014

TEC 49002:2014	TEC/IR/IT/FWS-002/01 SEP 2014
Set Top Box for Content Delivery Services in IP Network	TEC 51002:2014
Optical Fixed Attenuator (Type A & Type B)	TEC 88040:2014
Optical Variable Attenuator (Type A & Type B)	TEC 88050:2014
Optical Talk Set	TEC 88070:2014
WAN OPTIMIZATION FOR SATELLITE NETWORK	TEC 41050:2014
SWITCHING Node with Network NETWORK INTERFACE AT STM-1	TEC 58082:2014
SWITCHING Node with Network NETWORK INTERFACE AT 2048 Kbit/s	TEC 58072:2014
Short Message Service Cell Broadcast SMSCB	TEC 22140:2015
Ethernet Traffic Analyzer for Ethernet Transport Service Testing – Hand-held model	TEC 88200:2015
Universal Subscriber Identity Module USIM	TEC 20030:2015
Subscriber Identity Module SIM	TEC 20032:2015
Universal Subscriber Identity Module USIM	TEC 20042:2015
Aerial Drop Optical Fibre Cable with Installation Accessories (For Last mile applications	TEC 85200:2015
Remote Fibre Test and Monitoring System	TEC 88150:2015
Layer 4-7 Load Balancer Switch	TEC 48090:2015
Relational Database Management System for Telecom Applications	TEC 51100:2015
Planning & Maintenance Guidelines for Switch Mode Power Supply (SMPS) Based Power Plant	TEC 66069:2015
Planning & Maintenance Guidelines for SPV Power Supply	TEC 66079:2015
IR for ADSL2+	TEC 70062:2015
Power Meter (DC,0.5Hz to 100 KHz Single Phase)	TEC 73080:2015
Measurement Metrics and Measurement Methodology for Router and Switches for Green Passport	TEC 74019:2015
Electronic Telephone Instrument	TEC 79052:2015
Terminals for connecting to PSTN	TEC 79082:2015
V.92 Modem	TEC 80042:2015
V.90 Modem	TEC 80062:2015
Group 3 FAX Machine/Card	TEC 80082:2015
Hybrid Microwave Radio Equipment in upper 6 GHz band	TEC 36100:2015
Wi-Fi Access Point	TEC 38012:2015
Radio Access System for Broadband Application in 3.3-3.4 GHz band.	TEC 36110:2015
STM-1 Customer Premises Equipment (CPE) for access network application	TEC 70050:2015
20 Meter Guyed Wire Supporting Mast for Cellular Mobile System	TEC 45010:2015
40 Meter Guyed Wire Supporting Mast for Cellular Mobile System	TEC 45030:2015
30 Meter Guyed Wire Supporting Mast for Cellular Mobile System	TEC 45020:2015
IP PABX	TEC 60020:2015
SIP TERMINAL	TEC 59010:2015
Signalling Transfer Point (STP)	TEC 58120:2015
SIP Terminal	TEC 59012:2015
NMS	TEC 48100:2015
IP based Interconnection between Service Providers Networks	TEC 51036:2015
ENUM SERVER	TEC 59110:2015
Subscriber Identity Module SIM	TEC 20040:2015
UICC based ISIM including USIM	TEC 20052:2015
Non Zero Dispersion Shifted Single Mode Metal Free Optical Fibre Cable (G.655 C Fibre)	TEC 85050:2015
High Precision Cleaver for Ribbon Fibre	TEC 89040:2015
Hot Jacket Remover for Ribbon Fibre	TEC 89050:2015
Data Storage Infrastructure	TEC 49100:2015
Ethernet Traffic Analyzer up to 10 G (Hand Held Model)	TEC 88230:2016
Integrated Systems	TEC 48110:2016
Software Defined Network [SDN] Controller, and Additional Requirements for LAN Switches, Carrier Ethernet Switches and Routers for SDN	TEC 50010:2016
Element Management System (eMS)	TEC 52006:2016
Solar Photo Voltaic (SPV) Power Supply for fixed wireless terminals and similar systems	TEC 66080:2016
Lithium Ion Battery for Telecom Applications	TEC 67030:2016
400 W and 750 W TWTHigh Power Amplifiers Operating in Ku-band	TEC 41060:2016
Local Multipoint Distributionsystem in 26 GHz Frequency band	TEC 36020:2016
Local Multipoint Distribution system in 10.5 GHz Frequency Band	TEC 36010:2016
Local Multipoint Distribution system in 28 GHz Frequency Band	TEC 36030:2016
Radio Modem in ISM band	TEC 38050:2016
Handheld Spectrum Analyser (100 KHz – 3.0 GHz)	TEC 44030:2010
4.8 and 6.3 m Earth Station Antenna Operating in C-band	TEC 41080:2016
20W to 100W C – BAND SATELLITE BLOCK UP CONVERTERS (BUCs)	TEC 41420:2016
Executive Telephone System	TEC 79022:2006
Multi Line Telephone System	TEC 79112:2016
Audio Conference Facility Device	TEC 79122:2016
Point of Sales(POS) terminal with PSTN/CDMA/ GSM/GPRS interface	TEC 80012:2016
MPLS SDN Router	TEC 48120:2016
Element Management System (eMS) For Next Generation Networks (NGN)	TEC 49110:2016
Call Centre	TEC 51110:2016
TRUNK MEDIA GATEWAY	TEC 59060:2016
IP-PABX with MEDIAGATEWAY	TEC 60030:2016
Integrated Access Device	TEC 59020:2016
Electromagnetic Compatibility Standard for telecommunication Equipment	TEC 11016:2016
EMF Strength Measuring Instrument In the frequency range of 30 MHz to 3/6 GHz	TEC 44060:2016
40/80 Channel Dense Wavelength Division Multiplexing (DWDM) Equipment with channel bitrates of 10Gbps for Metro/Core Network	TEC 86080:2016
Optical Fibre Splicing Machine (Portable) (Type -I & Type-II)	TEC 88110:2016
Solar Photo Voltaic Power Supply for Telecom equipment	TEC 66090:2017
WLAN Controller	TEC 38010:2017
ADSS of Cable for laying along Power Line Alignments (errata No. 1 dated 11.9.17)	TEC 85190:2017
Riser Optical Fibre Cable	TEC 85210:2017
Installation Accessories and fixtures of Self Supporting Metal free Optical Fibre Cable	TEC 87060:2017
Multi-Protocol Label Switching Transport Profile (MPLS-TP) Based Carrier Ethernet Network (CEN) for Access and Aggregation Network Applications	TEC 48130:2017
Interactive Voice Response System.	TEC 51120:2017
VoIP Protocol/Performance Analyser	TEC 52110:2017
High Speed Line Drivers.	TEC 48052:2017
Ethernet to G.703 Interface Converter	TEC 48062:2017
Solar Photo Voltaic based Standalone/Hybrid Power Supply for Wi-Fi Terminals and other Similar Terminals	TEC 66100:2017
SMPS Based Power Plants	TEC 66110:2017
FTTH/FTTB/FTTC Broadband Access Applications using GPON Technology with amendment dated 28.6.2017	TEC 71010:2017
Wavelength Division Multiplexing Passive Optical Network (WDM-PON) Technology for FTTx based Broadband	TEC 71020:2017
Generic Requirements of an Integrated Broadband System for Delivery of Digital Services in Rural Areas	TEC 80020:2017
WiFi Hotspot	TEC 38030:2017
Point to Multipoint Multi Frequency Broadband System for frequency bands 3.3-3.4 GHz,3.5 GHz, 10.5 GHz & 26 GHz	TEC 36190:2017
Integrated Broadband System for Delivery of Digital Services in Rural Areas	TEC 23060:2017
12 V Switch mode power supply (SMPS) for wireless/wire line terminals &similar Systems	TEC 66120:2017
Lightening for surge protection of telecom site.	TEC 66130:2017
LAWFUL INTERCEPTION SYSTEM For PSTN / NGN / IMS	TEC 61010:2017
MONITORING EQUIPMENT FOR LAWFULINTERCEPTION OF PSTN / NGN / IMS	TEC 61020:2017
Telephony Application Server	TEC 59090:2017
SAR (Specific Absorption Rate) Measurement System for wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6 GHz))	TEC 13020:2017
Electronic Telephone Instrument	TEC 79040:2017
PABX for network Connectivity	TEC 60012:2017
Multi-service Optical Transport Network (OTN) platform with DWDM bearer transport system for Metro and Core Network Applications	TEC 86090:2017
Raw Materials used in Manufacturing of Optical Fibre Cable with amendment no.1 date 06.07.2020	TEC 89010:2017
Interactive Voice Response System	TEC 51012:2018
Asymmetric Digital Subscriber Line 2 Plus (ADSL 2+) System for Central Office and Remote Office Applications	TEC 70060:2018
Very High Speed Digital Subscriber Line (VDSL &VDSL2) Equipment COT and RT Applications	TEC 70070:2018
IP-DSLAM	TEC 70080:2018
Interface Requirements for interchange of STM1, STM-4, STM-16, STM-64 signals between different networks	TEC 89112:2018
Server	TEC 48140:2018
Unified Threat Management	TEC 49120:2018
Network Function virtualisation Infrastsucture (NFVI) and Virtual Infrastructure Manager (VIM)	TEC 50020:2018
Ethernet to E1 Converter	TEC 52120:2018
Self Supporting Metal Free Aerial Optical Fibre Cable (For Hilly & Rural Area)	TEC 85020:2018
Self Supporting Metal Free Aerial Optical Fibre Cable (For Urban areas)	TEC 85090:2018
Aerial Optical Fibre Drop Cable For FTTH Applications (FOR Short Span)	TEC 85220:2018
Test Procedure for Measurement of Electromagnetic field from Base Station Antenna	TEC 13019:2018
Session Border Controller	TEC 59040:2018
Network-Network Interface for Session Border Controller	TEC 59042:2018
SIGTRAN	TEC 59136:2018
Intrusion Detection System for IP Network Security.	TEC 49130:2018
Intrusion Prevention System	TEC 49140:2018
10 Gigabit Symmetric Passive Optical Network(XGS-PON) Technology for FTTx based Broadband Applications	TEC 71030:2018
FTTX based Broadband Access Applications using GPON technology with Mini-OLT	TEC 71040:2018
10 Gigabit Passive Optical Network(XG-PON) Technology for FTTx based Broadband Applications	TEC 71050:2018
TRUNK MEDIA GATEWAY	TEC 59062:2018
Data Dictionary	TEC 52016:2019
RF Monitoring System for continuous measurement of electromagnetic radiation	TEC 44050:2019
CALIBRATION OF ELECTROMAGNETIC FIELD STRENGTH MEASURING INSTRUMENT USED FOR MEASUREMENT OF EMF RADIATION FROM BASE STATION ANTENNA (300 MHz – 6 GHz)	TEC 44076:2019
Ethernet Traffic Analyzer 100 G (Hand Held Model)	TEC 88240:2019
Network Timing Protocol Server	TEC 48150:2019
Primary Refrence Clock cesieum frequency standards	TEC 49150:2019
Time Synchronization in IP Networks	TEC 49004:2019
Uninterrupted Power Supply (UPS) System	TEC 66140:2019
G.Fast equipment	TEC 70090:2019
Multi function portable device for Biometric authentication/e-KYC, Digital KYC and Bill payment at Point of Sales(POS)	TEC 80000:2019
ISDN Customer Premises Equipment	TEC 58022:2019
ISDN Network Termination (NT1)	TEC 58012:2019
VSAT based Mobility Services	TEC 42022:2019
Interface Requirements on Mobile Radio Trunking Subscriber Unit	TEC 39022:2019
Interface Requirements on Mobile Radio Trunking Communication Equipment	TEC 39012:2019
eNodeB	TEC 21050:2019
EVOLVED PACKET CORE	TEC 22150:2019
Embedded Subscriber Identity Module (ESIM)	TEC 20062:2019
Software Defined Wide Area Network (SDWAN)	TEC 49160:2019
Optical Time Domain Reflectometer (Mini) (Type-A & Type-B)	TEC 88130:2019
Double Walled Corrugated (DWC) HDPE Duct	TEC 72020:2019
Permanently lubricated HDPE telecom Ducts for use as underground optical fibre cable conduits	TEC 72030:2019
Optical Time Domain Reflectometer (Type I) (1310 nm & 1550 nm wavelength) for Long Haul Applications	TEC 88120:2019
VRLA batteries for high rate of discharge (UPS) application	TEC 67040:2019
Symmetric Pair High Bit Rate Digital Subscriber Line (SHDSL) System	TEC 70100:2019
FTTH/FTTB/FTTC Broadband Access Applications Using EPON Technology	TEC 71060:2019
Voluntary Code of Practice for Sustainable Telecom	TEC 74039:2019
Media Server	TEC 59100:2019
Signalling Gateway	TEC 59050:2019
Integrated Disaster Management System (IDMS) using Common Alert Protocol (CAP)	TEC 51004:2020
Power System Based On Renewable Energy for Telecom Equipment	TEC 66150:2020
40-Gigabit-capable symmetric passive optical network (NG-PON2) technology for FTTX based broadband applications	TEC 71070:2020
Micro duct for indoor and outdoor Applications	TEC 72040:2020
Stabilised Light Source Type A & Type B (with TSTP)	TEC 88160:2020
Ethernet Traffic Analyzer 1/10/100 G (Hand Held Model)	TEC 88300:2020
Precision Time Protocol (PTP) Grandmaster Clock	TEC 49170:2020
Audio Conferencing	TEC 51014:2020
Guidelines for Lithium-Ion Battery	TEC 67039:2020
SAR for wireless communication devices used in close proximity to the human body	TEC 13016:2020
Standard for Energy Consumption Rating and Energy Passport for Telecommunications Products, Equipment and Network/ Services	TEC 74046:2020
Media Resource Function	TEC 59190:2020
Standard for GR for 40/80 Channel Dense Wavelength Division Multiplexing (DWDM) System with Channel bit-rate of 100/200 Gbps for Core/Metro Network Applications	TEC 86070:2021
Standard for IR for Interchange of ETHERNET Signals between Different Networks	TEC 89122:2021
Standard for GR for Wi-Fi Access Point	TEC 38020:2021
Standard for IR for Communication and Broadcast Networks for FSS/BSS (Mandatory Technical Requirements)	TEC 42012:2021
Standard for SR for Voice Mail Service	TEC 61064:2021
Standard for SR for Audiotex Service	TEC 61054:2021
Fibre Optic Network Terminal Box (FONT)	TEC 72050:2021
ADSS OPTICAL Fibre Cable for laying along power line alignments (for Long Span)	TEC 85230:2021
WiMAX CPE USB	TEC 21070:2011
WiMAX based Broadband Wireless Access System	TEC 21060:2011
WiMAX CPE Indoor	TEC 20070:2011
WiMAX CPE Outdoor	TEC 20060:2011
Global Maritime Distress and Safety System GMDSS Terrestrial	TEC 23070:2005
Lawful Interception of GSM Network	TEC 22170:2004
GSM Mobile Station and Fixed Cellular Terminal	TEC 20050:2004
Multimedia Messaging Service MMS	TEC 22160:2003
Nx25G-EPON (25G-EPON and 50G-EPON) for FTTx Broadband Access Applications	TEC 71080:2021
10G-EPON for FTTx Broadband Access Applications	TEC 71090:2021

BIS Certification for Steel Products (Foreign Manufacturers)

BIS Certification for Steel Products (Foreign Manufacturers)

Requirements for Foreign Manufacturers

Certification Procedure under FMCS

Consequences of Non-Conformities

Other Topics

BIS Certification for German Companies (Foreign Manufacturers)

BIS Certification for German Companies (Foreign Manufacturers)

Requirements and Legal Context

Certification Process (FMCS / Scheme I)

Machinery and Technical Equipment (Scheme X)

Consequences of Non-Conformity

Other Topics

BIS Scheme X – Certification Requirement for Industrial Machinery in India

Department of Telecommunications (DoT)

Central Drugs Standard Control Organization (CDSCO)

Ministry of Communications and Information Technology (MEITY)

Paper Import Monitoring System (PIMS)

BIS Standards

Certification Scheme I (ISI Mark Scheme)

Certification Scheme II (Registration Scheme)

PESO Standards (English)

Explosives Act 1884:

Petroleum Act 1934:

TEC Standards (English)

Pages

Archives

Categories