India introduces Mandatory BIS Certification for Water Chillers

In an order dated September 25, 2023, the Department for Promotion of Industry and Internal Trade of India’s Ministry of Trade and Industry emphasized the mandatory BIS Certification for self-contained drinking water coolers. The regulation, known as the Self-Contained Drinking Water Cooler Quality Control Order, aims to raise the standards of water chillers in the Indian market.

The guideline states that all self-contained drinking water coolers must comply with Indian Standard 1475 (Part 1): 2001, which focuses on energy consumption and performance. Manufacturers are required to obtain BIS-ISI certification by March 25, 2024 in order to be able to import or sell products in this category in India after the deadline.

The Bureau of Indian Standards, or BIS for short, is designated as the certification and enforcement authority for this regulation. Violations of these provisions will result in penalties. This move is a clear sign of the government’s commitment to upholding product quality and consumer protection to increase consumer confidence in domestically produced goods and bring Indian products up to global standards. The implementation of this regulation is expected to have a significant impact on the water chiller industry and improve the overall quality of products available in the Indian market.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

India Enforces BIS Certification Requirement for Door Fittings

The Government of India has introduced the mandatory BIS-ISI certification for door fittings with the Door Fittings Quality Control Order, which comes into effect on October 23, 2023. This crucial step reflects the government’s ambition to improve the safety and reliability of door hardware in the domestic market through standardized quality guidelines.

According to the new regulation, all door fittings, including various types of door closers and door handles, must comply with the established Indian IS standards. The regulation provides for the provisions for small and medium-sized enterprises to enter into force at a later date in order to give them more time to adapt, while products for export are exempt from this rule. The regular deadline for certification is April 23, 2024.

By introducing this regulation, the Indian government is demonstrating its commitment to improved quality standards and increased consumer protection. The initiative is expected to have a significant impact on the door fitting industry as it helps raise the level of products available in India while solidifying consumer confidence in local and imported products.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

New Quality Control Order (QCO) makes BIS Certification in India mandatory for Steel Wires, Nylon Ropes and Others

On November 21, 2023, the Department for Promotion of Industry and Internal Trade (DPIIT) of the BIS (Bureau of Indian Standards) announced a major Quality Control Order (QCO) that makes the ISI mark mandatory for steel wires or strands, nylon or wire ropes, and wire mesh. The standards concerned relate to the ISI certification scheme (Scheme I) of BIS certification.

The regulation is expected to become effective six months after its publication in the Official Journal, giving companies sufficient time to comply with the new regulations and complete the process of BIS-ISI certification.

Micro and small enterprises (MSEs) must comply with specific deadlines set out in the Directive:

• Small Businesses: November 21, 2024
• Micro Businesses: August 21, 2024

By introducing ISI certification, the government aims to increase consumer safety and promote competitiveness in these sectors.

This move is expected to have a significant impact on manufacturers and suppliers, prompting them to adapt their operations to the strict quality control measures mandated by the DPIIT.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

Scheme of Inspection and Testing (SIT) for ISI Mark optional for Small Footwear Manufacturers

In an announcement on September 14, 2023 the Bureau of Indian Standards (BIS) made important changes to the Product Manuals for various consumer footwear and footwear components that relate to BIS Certification. The changes provide greater flexibility to micro and small manufacturers by making compliance with the Scheme of Inspection and Testing (SIT) optional in certain areas.

Under the revised guidance, the following SIT requirements are considered optional for micro and small manufacturers:

1. Laboratory requirements (clause 1): The requirement to maintain an adequately equipped and staffed laboratory will not be mandatory.
2. Test protocols (clause 2): The requirement to maintain test records will not be mandatory.
3. Control unit (clause 4) and control levels (clause 5): The performance of tests as specified under the control levels will be optional.

These amendments apply to a range of consumer footwear and footwear components, including the following footwear:

• Sandals and Slippers (IS 6721:2023)
• Hawaii Chappals (IS 10702:2023)
• Sports Footwear (IS 15844:2010, IS 15844 (Part 1):2023, IS 15844 (Part 2):2023)
• Canvas Shoes and Boots with Rubber Sole (IS 3735:1996, IS 3736:1995)
• Molded Solid Rubber Soles and Heels (IS 5676:1995)
• Rubber Microcellular Sheets for Soles and Heels (IS 6664:1992)
• Solid PVC Soles and Heels (IS 6719:1972)
• Polyurethane Sole, Semirigid (IS 13893:1994)

It is important to note that while these specific requirements are optional, all entities, including micro and small manufacturers, must continue to ensure compliance with Indian Standards and SIT related to packaging and labeling and rejection. In addition, the other BIS-ISI Certification requirements for obtaining the BIS Certificate continue to apply.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

Regulatory Changes: Disposal of Battery Waste in India

The Ministry of Environment, Forest and Climate Change has announced amendments to the Battery Waste Management Rules of 2022. The provisions came into force on October 25, 2023.

Companies producing batteries, distributors, end users and organizations involved in the collection, classification, transport, treatment and recycling of waste batteries are required to comply with these regulations. These regulations apply to all types of batteries, regardless of their chemical nature, shape, size, weight, composition of materials and intended use. This includes batteries for electric cars, household appliances, automotive batteries and those used in industry.

The most important points of the notification are listed below:

1. The new definition of “battery” does not include battery components. Previously, the definition included new or reconditioned cells/batteries and their components.

2. The EPR (Extended Producer Responsibility) for batteries used for own use also falls within the scope of the regulation.

3. Producers are obliged to submit annual reports on the batteries produced in the previous fiscal year.

4. Registrations do not expire until they are cancelled or withdrawn by the producer.

5. The mandatory targets for the collection, recycling or reprocessing of waste batteries for electric vehicles, including e-rickshaws, of categories L5, L5-M, L5-N and e-carts have been replaced.

6. Manufacturers must ensure that each battery or battery pack is provided with an EPR (Extended Producer Responsibility) registration number by 31 March 2025 at the latest.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

You can find further information on Battery Waste Management for India on our website.

New Indian Regulation on BIS Certification for Aluminum and Aluminum Alloys 2023

On August 31, 2023, the Indian Ministry of Commerce and Industry together with the Ministry of Mines published a new regulation for the quality control of aluminum and aluminum alloys. This will come into force three months after the publication date, on January 1, 2024. Aluminum and similar material products (such as steel) generally require BIS Certification to be approved for import and trade in India.

The regulations only apply to materials that are produced and used domestically, or that are imported. Products for the export market are not affected. Certification is carried out by the Bureau of Indian Standards, or BIS for short.

According to the regulation of the Ministry of Commerce and Industry, the following products require both BIS-ISI certification and a corresponding mark (ISI Mark):

Aluminum and aluminum alloys

This list is supplemented by the Ministry of Mines Ordinance to include other aluminium products:

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

Manufacturers of Protective Textiles Now Require BIS Certification for Export to India

Manufacturers of various protective textiles must now obtain BIS certification in  order to export their products to India. This development affects a wide range of products, including fire-resistant curtains, upholstery composites for non-domestic furniture, and specialized protective clothing for firefighters and industrial workers. In addition, high-visibility clothing, tactical equipment such as 3-point carrying slings and bulletproof vests also fall under this requirement.

The Indian Standards (IS) for these protective textile products have been established to ensure safety and quality. For example, IS 15741:2007 specifies resistance to ignition of curtains and curtains, while IS 16890:2018 defines the requirements for protective clothing for firefighters. Other specifications include IS 15748:2022 for protective clothing for industrial workers exposed to heat and IS 17051:2018 for bulletproof vests. These standards not only establish the minimum safety criteria, but also comply with international standards and aim to increase the protection and reliability of these products.

The implementation of BIS certification for these products is an important step towards strengthening safety standards. It reflects India’s commitment to ensuring that protective textiles meet strict quality controls. This measure is expected to have a significant impact on domestic and foreign manufacturers, who will now need to meet these standards to gain access to the Indian market. This move not only improves the safety of these products, but also boosts consumer confidence in their effectiveness and reliability.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.

BIS Certification: A New Mandate for Plywood and Wooden Flush Door Shutters in India

In a recent communication from the Ministry of Trade and Industry, the central government of India has highlighted the importance of quality control in the plywood industry. This step is taken after consultation with the Bureau of Indian Standards (BIS), which is responsible for the BIS certification for manufacturers of these and other products and also manages the ISI Mark.

The Plywood and Wooden Flush Door Shutters (Quality Control) Order, 2023 stipulates that the goods or items contained must comply with the associated Indian standard. In addition, they should bear the ISI mark of the BIS. Any breach of this order will result in sanctions under the provisions of the Bureau of Indian Standards Act, 2016.

This Regulation shall enter into force six months after the date of its official announcement on August 29, 2023. However, separate provisions have been made for small and micro enterprises defined in the Micro, Small, and Medium Enterprises Development Act. For small enterprises, the regulation will take effect nine months after its notification, and for micro-enterprises, twelve months.

Further information on the ISI Mark or BIS certificate can be found on our website.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS CRS registration and BIS ISI Certification, please refer to our free brochure “BIS Certification Made Easy“.

Extension of Mandatory Certification Date for 32 Products (ERS) covered under Phase-lll & IV of MTCTE

A new amendment is hereby notified with immediate effect as a partial modification to notification no. 5-2/2021-TC/TEC/164 dated June 23, 2023 by the Department of Telecommunications Telecommunication Engineering Centre (TEC). Telecommunications equipment usually requires TEC certification to be approved for import and distribution in India.

The amendment is regarding the testing and certification of telecommunication equipment under Phase-III and Phase-IV of the Mandatory Testing & Certification of Telecommunication Equipment (MTCTE) regime, as provided in the Indian Telegraph (Amendment) Rules, 2017.

The deadline for mandatory certification of 32 products (ERs) falling under the purview of MTCTE Phase-III and Phase-IV is hereby extended by three months, specifically from  October 1, 2023 to January 1, 2024. A comprehensive list of these 32 products can be found at the end of this page.

Furthermore, it should be noted that all other terms, conditions, and obligations stated in the previously mentioned notification dated June 23, 2023, including the mandatory certification dates for the remaining 12 products, shall remain unaltered and intact.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

For more information about TEC certification, please refer to our free brochure “TEC Certification Made Easy“.

List of 32 Products (ERs) under Phase-III & Phase-IV of MTCTE with mandatory Certification Date as January 01, 2024

S No	ER/ Product	Notified in Phase
1.	Equipments Operating in 2.4 GHz and 5 GHz Band	Phase-3
2.	IoT (Internet of Things) Gateway	Phase-3
3.	Tracking Device	Phase-3
4.	Smart Electricity Meter	Phase-3
5.	End Point Device for Environmental Monitoring	Phase-3
6.	DSL (Ddigital Subscriber Line) Equipments	Phase-4
7.	Signalling Gateway	Phase-4
8.	Session Border Controller	Phase-4
9.	Softswitch	Phase-4
10.	Media Gateway	Phase-4
11.	Precision Timing Protocol Grand Master Equipment	Phase-4
12.	LAN (Local Area Network) Switch	Phase-4
13.	Router	Phase-4
14.	Infiniband Switch	Phase-4
15.	IP Multimedia Conferencing Equipment	Phase-4
16.	IP Security Equipment	Phase-4
17.	Conferencing Equipment	Phase-4
18.	Transmission Terminal Equipment-2 (DWDM, Digital Cross Connect)	Phase-4
19.	Mobile Management Entity (MME)	Phase-4
20.	Serving GPRS Support Node (SGSN) / Gateway GPRS Support Node (GGSN)	Phase-4
21.	Base Station Control (BSC)/ Radio Network Controller (RNC)	Phase-4
22.	Cell Broadcast Centre (CBC)	Phase-4
23.	Gateway Mobile Location Centre (GMLC)	Phase-4
24.	Home Location Register (HLR)/ Authentication Centre (AUC)/ Home Subscriber Server (HSS)	Phase-4
25.	Mobile Switching Centre (MSC) / MSC-Server (MSC-S) / Gateway MSC (GMSC) / Gateway MSC-Server (GMSC-S) including Visitor Location Register (VLR)	Phase-4
26.	OTA and DM or FOTA	Phase-4
27.	Service Control Point (SCP)	Phase-4
28.	Operations and Maintenance Center (OMC) / Element Management Systems (EMS) / Network Management Systems (NMS) / Operations Support System (OSS)	Phase-4
29.	Serving Gateway (S-GW) / Packet Data Network Gateway (P-GW)	Phase-4
30.	Short Message Service Center (SMSC)	Phase-4
31.	Serving Mobile Location Center (SMLC) / eSMLC	Phase-4
32.	Equipment Identity Register (EIR)	Phase-4

Bureau of Indian Standards (BIS) visits MPR in Frankfurt

On October 24, 2023, representatives of the Bureau of Indian Standards (BIS) from New Delhi visited MPR International GmbH in Frankfurt am Main. There was an intensive exchange between representatives of BIS and the Managing Directors of MPR Verena Numssen and Julian Busch.

The new strategic approaches of BIS were discussed, in particular the expansion of the regulations for the ISI Mark, which is awarded in the course of BIS ISI certification for India.

In recent months, numerous Quality Control Orders (COO) have been published and new products have been added to the catalog of products requiring BIS certification.

These include footwear, steel products, chemicals, textile products and aluminum products.

Details on factory audits, which may only be carried out by BIS auditors from India, were also discussed.

In addition to new certification regulations and information on factory audits, the approach of Indian customs, which receives intensive training from BIS to ensure that no non-certified products and raw materials without an ISI mark can be imported into India, was also discussed in more detail.

MPR International supports numerous customers in obtaining their BIS-ISI certificates and BIS-CRS certificates.

If you are interested in understanding what requirements are needed for your product to be imported into India, please do not hesitate to contact us by email or phone (Europe: +49-69-271 37 69 261, US: +1 773 654-2673). There is no cost or obligation for us to check for you. If a certification need is discovered we can provide a quotation to make sure that all your certification needs are covered.

If you have any questions you can also use our chat-window in the bottom right. (Please check your browser settings if you can’t see the window)

For more information about BIS certification, please refer to our free brochure “BIS Certification Made Easy“.